Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: Is Netsystem working?
Hi Denis!
Startup Script: http://vdr.at/public/tune.sh.txt
Channels.conf: http://vdr.at/public/channels.conf.txt
Route - also online at http://vdr.at/public/route.txt
Route after establishing the VPN Connection (MRU=1000, MTU=1000):
pppd pty 'pptp vpn.netsystem.com --nolaunchpppd' call netsystem debug dump
logfd 2 nodetach
pppd options in effect:
debug debug # (from command line)
nodetach # (from command line)
logfd 2 # (from command line)
dump # (from command line)
noauth # (from /etc/ppp/options.pptp)
refuse-chapms # (from /etc/ppp/options)
name nsuname # (from /etc/ppp/peers/netsystem)
remotename PPTP # (from /etc/ppp/peers/netsystem)
# (from /etc/ppp/options.pptp)
pty pptp vpn.netsystem.com --nolaunchpppd # (from command
line)
mru 1000 # (from /etc/ppp/options.pptp)
mtu 1000 # (from /etc/ppp/options.pptp)
lcp-echo-failure 10 # (from /etc/ppp/options.pptp)
lcp-echo-interval 10 # (from /etc/ppp/options.pptp)
nobsdcomp # (from /etc/ppp/options.pptp)
nodeflate # (from /etc/ppp/options.pptp)
mppe-40 # (from /etc/ppp/options.pptp)
mppe-128 # (from /etc/ppp/options.pptp)
mppe-stateless # (from /etc/ppp/options.pptp)
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyp2
Destination Gateway Genmask Flags Metric Ref Use
Iface
212.31.242.99 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.46.0 0.0.0.0 255.255.255.0 U 0 0 0
dvb0_0
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 192.168.0.4 0.0.0.0 UG 0 0 0 eth1
Then I remove the route to 212.31.242.99 and add the following route:
route add -net 212.31.242.0/24 gw 192.168.0.4 dev eth1
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.46.0 0.0.0.0 255.255.255.0 U 0 0 0
dvb0_0
212.31.242.0 192.168.0.4 255.255.255.0 UG 0 0 0 eth1
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 192.168.0.4 0.0.0.0 UG 0 0 0 eth1
After that I change the default route to ppp0:
route del default && route add default ppp0
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.46.0 0.0.0.0 255.255.255.0 U 0 0 0
dvb0_0
212.31.242.0 192.168.0.4 255.255.255.0 UG 0 0 0 eth1
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
What MTU/MRU are you using for netsystem - maybe that's the problem?
My ICQ# is 39621839
Thanks,
Martin Karer
> -----Original Message-----
> From: Denis Kot [mailto:dkot@mineralstroi.com]
> Sent: Friday, September 26, 2003 8:29 AM
> To: Martin Karer
> Subject: Re: [linux-dvb] Re: Is Netsystem working?
>
> Martin Karer wrote:
> >>Martin Karer wrote:
> >>
> >>
> >>>Hi, is anybody able to use netsystem -
> >>
> >>http://www.netsystem.com/eng/satadslplus.asp - on Linux
> (with current
> >>drivers (I use 20030811))?
> >>
> >>>I\'ve read everything about Netsystem + Linux I found with
> >>
> >>Google, but
> >>
> >>>as I\'m behind a router nothing worked for me :(
> >>>
> >>>This is what I\'ve found out yet:
> >>>dvbtune -c 0 -f 12721000 -p H -s 22000 -n 451 ifconfig -a dvb0_0
> >>>ifconfig dvb0_0 192.168.46.21 ifconfig dvb0_0 hw ether
> >>>MY:MA:CA:DD:RE:SS Then I connect to the VPN Server, but
> >>
> >>when I set the
> >>
> >>>default route to ppp0 the VPN disconnects...
> >>>
> >>>Maybe it\'s just a problem with the routing table, any hints?
> >>>
> >>>My configuration:
> >>>eth1 = wlan
> >>>gateway/dns = 192.168.0.
> >>>
> >>>Thank you!
> >>>
> >>>PS: Sorry for my bad english - it\'s not my native
> >>
> >>language, but I hope that you can understand everting!
> >>
> >>http://www.opennet.ru/base/net/skystar2_setup.txt.html
> >>it's in russian, but I hope You can understand script and routing
> >>table inside.
> >>
> >>if You have any questions - ask me.
> >>
> >>--
> >>Best regards,
> >>Denis Kot
> >>SysAdmin
> >>ICQ: 13680126
> >>Mobil: +375 29 6123478
> >
> >
> > Hi Denis,
> >
> > i followed the instructions on that page and I could successfully
> > connect to Netsystem, but I still cannot cannot download
> something or
> > browse the internet (I *sometimes* get a response from the
> website I
> > want to connect to, but the connection times out after some
> minutes) -
> > do I need to compile my kernel with specific modules / could you or
> > somebody else who can use Netsystem with linux please send
> me a kernel .config file?
> >
> > I've also tried to disable my firewall, but that didn't help.
> >
> > What DVB Drivers are you using?
>
> Hi
> show me your startup script and routing table *after* connect
> to netsystem
>
> p.s. do you have ICQ?
>
> --
> Best regards,
> Denis Kot
> SysAdmin
> ICQ: 13680126
> Mobil: +375 29 6123478
>
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index