[vdr] Re: DVB - RequestParameter error

To: "vdr@linuxtv.org" <vdr@linuxtv.org>
Subject: [vdr] Re: DVB - RequestParameter error
From: Sven Soltau <sven.soltau@web.de>
Date: 09 Aug 2003 08:29:09 +0200
Content-transfer-encoding: 8bit
Content-type: text/plain; charset=ISO-8859-15
In-reply-to: <3F32C35B.E68D4F4F@t-online.de>
References: <1060286570.2305.6.camel@LinuxRechner> <3F32C35B.E68D4F4F@t-online.de>
Reply-to: vdr@linuxtv.org
Sender: vdr-bounce@linuxtv.org

Am Don, 2003-08-07 um 23.23 schrieb Karlheinz Pischke:
> Aug  7 15:56:09 VDR-Rechner kernel: IRQ routing conflict for 00:11.5,
> have irq 9, want irq 2
> 
> This line could indicate that the apic (pci / irq routing) is not
> working correctly. I had a problem 3 days ago that a network card
> did not want to work correctly.
> 
> I changed the kernel parameters for boot to 
> ..... acpi=force pci=noacpi ...

Could it be that there is something wrong in that line? I tried it with
append = "acpi=force pci=noacpi"
then lilo
After a restart there is a message in the boot.log that
pci=noacpi is not understood.

How do I have to spell it the right way?
Greetings
Sven

> This setting disables the automagic PCI-IRQ rerouting but leaves 
> other functionality of of acpi intact.
> 
> Give it a try.
> 
> > Sven Soltau schrieb:
> > 
> > Hello together,
> > 
> > I have got a problem (only sometimes) when I start my vdr - the
> > DVB-card is not registering correct (Siemens DVB-S Rev. 1.3)
> > As you can see from the log - but why does it happen sometimes?
> > If it happens the DVB out doesn't show a picture - restart vdr doesn't
> > help I have to reboot the hole system.
> > 
> > What can I do to get rid of this error?
> > 
> > Many thanks
> > Sven
> > 
> > Aug  7 15:56:04 VDR-Rechner syslogd 1.4.1: restart.
> > Aug  7 15:56:06 VDR-Rechner sshd[615]: Server listening on :: port 22.
> > Aug  7 15:56:08 VDR-Rechner /usr/sbin/cron[712]: (CRON) STARTUP (fork
> > ok)
> > Aug  7 15:56:09 VDR-Rechner kernel: klogd 1.4.1, log source =
> > /proc/kmsg started.
> > Aug  7 15:56:09 VDR-Rechner kernel: Inspecting /boot/System.map
> > Aug  7 15:56:09 VDR-Rechner kernel: Loaded 12775 symbols from
> > /boot/System.map.
> > Aug  7 15:56:09 VDR-Rechner kernel: Symbols match kernel version
> > 2.4.18.
> > Aug  7 15:56:09 VDR-Rechner kernel: Loaded 725 symbols from 26
> > modules.
> > Aug  7 15:56:09 VDR-Rechner kernel: hdc: CHECK for good STATUS
> > Aug  7 15:56:09 VDR-Rechner kernel: Linux video capture interface:
> > v1.00
> > Aug  7 15:56:09 VDR-Rechner kernel: DVB: registering new adapter
> > (Siemens/Technotrend/Hauppauge PCI rev1.3).
> > Aug  7 15:56:09 VDR-Rechner kernel: PCI: Found IRQ 10 for device
> > 00:0b.0
> > Aug  7 15:56:09 VDR-Rechner kernel: saa7146_core.o: adjusting pci
> > latency to 64
> > Aug  7 15:56:09 VDR-Rechner kernel: DVB: registering frontend 0:0
> > (Alps BSRV2)...
> > 
> > Here is the error
> > 
> > Aug  7 15:56:09 VDR-Rechner kernel: RequestParameter error
> > Aug  7 15:56:09 VDR-Rechner kernel: DVB: AV711357876745(0) - firm
> > 04042e00, rtsl 06f40000, vid 82c8c408, app 0000c442
> > Aug  7 15:56:09 VDR-Rechner kernel: DVB: AV711357876745(0) - no
> > firmware support for CI link layer interface
> > Aug  7 15:56:09 VDR-Rechner kernel: outcom error
> > Aug  7 15:56:09 VDR-Rechner kernel: outcom error
> > Aug  7 15:56:09 VDR-Rechner kernel: av7110(0): adac type set to 0
> > Aug  7 15:56:09 VDR-Rechner kernel: outcom error
> > Aug  7 15:56:09 VDR-Rechner last message repeated 5 times
> > Aug  7 15:56:09 VDR-Rechner kernel: via-rhine.c:v1.10-LK1.1.13
> > Nov-17-2001  Written by Donald Becker
> > Aug  7 15:56:09 VDR-Rechner kernel:
> > http://www.scyld.com/network/via-rhine.html
> > Aug  7 15:56:09 VDR-Rechner kernel: PCI: Assigned IRQ 9 for device
> > 00:12.0
> > Aug  7 15:56:09 VDR-Rechner kernel: eth0: VIA VT6102 Rhine-II at
> > 0xb400, 00:0c:6e:1b:c7:64, IRQ 9.
> > Aug  7 15:56:09 VDR-Rechner kernel: eth0: MII PHY found at address 1,
> > status 0x7849 advertising 01e1 Link 0000.
> > Aug  7 15:56:09 VDR-Rechner kernel: spurious 8259A interrupt: IRQ7.
> > Aug  7 15:56:09 VDR-Rechner kernel: isapnp: Scanning for PnP cards...
> > Aug  7 15:56:09 VDR-Rechner kernel: isapnp: No Plug & Play device
> > found
> > Aug  7 15:56:09 VDR-Rechner kernel: IPv6 v0.8 for NET4.0
> > Aug  7 15:56:09 VDR-Rechner kernel: IPv6 over IPv4 tunneling driver
> > Aug  7 15:56:09 VDR-Rechner kernel: PCI: Found IRQ 2 for device
> > 00:11.5
> > Aug  7 15:56:09 VDR-Rechner kernel: IRQ routing conflict for 00:11.5,
> > have irq 9, want irq 2
> > Aug  7 15:56:09 VDR-Rechner kernel: PCI: Setting latency timer of
> > device 00:11.5 to 64
> > 
> > Boot log after reboot
> > 
> > Aug  7 17:05:13 VDR-Rechner kernel: klogd 1.4.1, log source =
> > /proc/kmsg started.
> > Aug  7 17:05:13 VDR-Rechner kernel: Inspecting /boot/System.map
> > Aug  7 17:05:13 VDR-Rechner kernel: Loaded 12775 symbols from
> > /boot/System.map.
> > Aug  7 17:05:13 VDR-Rechner kernel: Symbols match kernel version
> > 2.4.18.
> > Aug  7 17:05:13 VDR-Rechner kernel: Loaded 725 symbols from 26
> > modules.
> > Aug  7 17:05:13 VDR-Rechner kernel: VFS: Disk change detected on
> > device ide1(22,0)
> > Aug  7 17:05:13 VDR-Rechner kernel: VFS: Disk change detected on
> > device ide1(22,0)
> > Aug  7 17:05:13 VDR-Rechner kernel: hdc: CHECK for good STATUS
> > Aug  7 17:05:13 VDR-Rechner kernel: Linux video capture interface:
> > v1.00
> > Aug  7 17:05:13 VDR-Rechner kernel: DVB: registering new adapter
> > (Siemens/Technotrend/Hauppauge PCI rev1.3).
> > Aug  7 17:05:13 VDR-Rechner kernel: PCI: Found IRQ 10 for device
> > 00:0b.0
> > Aug  7 17:05:13 VDR-Rechner kernel: saa7146_core.o: adjusting pci
> > latency to 64
> > Aug  7 17:05:13 VDR-Rechner kernel: DVB: registering frontend 0:0
> > (Alps BSRV2)...
> > 
> > why does it work here and not the first time ?
> > 
> > Aug  7 17:05:13 VDR-Rechner kernel: DVB: AV7111(0) - firm f0240009,
> > rtsl b0250018, vid 71010068, app 80002618
> > Aug  7 17:05:13 VDR-Rechner kernel: DVB: AV7111(0) - firmware supports
> > CI link layer interface
> > Aug  7 17:05:13 VDR-Rechner kernel: av7110(0): adac type set to 0
> > Aug  7 17:05:13 VDR-Rechner kernel: via-rhine.c:v1.10-LK1.1.13
> > Nov-17-2001  Written by Donald Becker
> > Aug  7 17:05:13 VDR-Rechner kernel:
> > http://www.scyld.com/network/via-rhine.html
> > Aug  7 17:05:13 VDR-Rechner kernel: PCI: Assigned IRQ 9 for device
> > 00:12.0
> > Aug  7 17:05:13 VDR-Rechner kernel: eth0: VIA VT6102 Rhine-II at
> > 0xb400, 00:0c:6e:1b:c7:64, IRQ 9.
> > Aug  7 17:05:13 VDR-Rechner kernel: eth0: MII PHY found at address 1,
> > status 0x786d advertising 01e1 Link 45e1.
> > Aug  7 17:05:13 VDR-Rechner kernel: eth0: Setting full-duplex based on
> > MII #1 link partner capability of 45e1.
> > Aug  7 17:05:13 VDR-Rechner kernel: isapnp: Scanning for PnP cards...
> > Aug  7 17:05:13 VDR-Rechner kernel: isapnp: No Plug & Play device
> > found
> > Aug  7 17:05:13 VDR-Rechner kernel: IPv6 v0.8 for NET4.0
> > Aug  7 17:05:13 VDR-Rechner kernel: IPv6 over IPv4 tunneling driver
> > Aug  7 17:05:13 VDR-Rechner kernel: PCI: Found IRQ 2 for device
> > 00:11.5
> > Aug  7 17:05:13 VDR-Rechner kernel: IRQ routing conflict for 00:11.5,
> > have irq 9, want irq 2
> > Aug  7 17:05:13 VDR-Rechner kernel: PCI: Setting latency timer of
> > device 00:11.5 to 64
> > Aug  7 17:05:13 VDR-Rechner kernel: ALSA
> > ../../alsa-kernel/pci/ac97/ac97_codec.c:1450: AC'97 0:0 analog
> > subsections not
> 
> -- 
> 
> 
> Mit freundlichem Gruß
> 
> Karlheinz Pischke
> 
> 
> Karlheinz Pischke
> Schleissheimer Str. 63
> 80797 München
> 
> Email:  kh@khpi.de
> Tel:    089 12162065
> Fax:    089 12162066
> 
> (Mobil: 0172 8418644)
> 



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.

Follow-Ups:
- [vdr] Re: DVB - RequestParameter error
  - From: "Ulrich Petri" <ulope@gmx.de>
- [vdr] Re: DVB - RequestParameter error
  - From: Andreas Mair <Andreas.Mair@linogate.com>

References:
- [vdr] DVB - RequestParameter error
  - From: Sven Soltau <sven.soltau@web.de>
- [vdr] Re: DVB - RequestParameter error
  - From: Karlheinz.Pischke@t-online.de (Karlheinz Pischke)

Prev by Date: [vdr] watchdog doesn´t work when vdr called with option "-d"?
Next by Date: [vdr] vdr-restart fails with dvb-kernel
Previous by thread: [vdr] Re: DVB - RequestParameter error
Next by thread: [vdr] Re: DVB - RequestParameter error
Index(es):
- Date
- Thread

Home | Main Index | Thread Index