Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: How do I watch TV ?
Alexandre CONRAD wrote:
>> it's pretty easy to extend the scan utility wo write any other channel
>> list format, e.g. VDR or tuxzap channel lists. Feel free to do so and
>> send a patch when you're done.
>
> Humm...
>
> What I'm asking it pretty simple. I want to watch TV. I'm not a
> programmer, and I'm a little new to linux and satellite technologies.
> What I just need is to have a moving picture on my screen from a command
> line. ;)
>
> I want to do for example "./szap -n 001 [enter key]", and there, it
> switches to a channel, and I can see on picture on my TV screen comming
> from the Satellite card TV output. The "scan" utility doesn't seem to
> get anything here.
sure, the szap channel list is generated for Astra.
>
> *./scan
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>
> >>> tune to:
> 11837000:INVERSION_OFF:27500000:FEC_3_4
>
> switch pos 0, 18V, hiband
> index 3
> msg: e0 10 38 f3 00 00
>
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning failed!!!*
>
> It goes like that over and over again until I get :
>
> *>>> tune to:
> 10978000:INVERSION_OFF:2344000:FEC_3_4
>
> switch pos 0, 13V, loband
> index 0
> msg: e0 10 38 f0 00 00
>
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning status == 0x03!!!
> >>> tuning failed!!!
>
> initial tuning failed!*
You have to add an initial transponder for your satellite to the end of
the qpsk_probes list in initial.h.
Otherwise scan can never read an initial Network Information Table to
build the channel list.
Holger
--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index