Hi!
The transfer-mode uses always priority -1.
That presents a problem: If I connect to that vdr using streamdev, it
switches the first budget device off from the multiplex transfered to
the FF card, although there is a second identical budget device available.
Also, if I had DVB-S FF and only one DVB-T budget and had a DVB-T
recording with priority 10 and Primary Limit at 20, live DVB-T video
would (wouldn't it?) be severed.
Klaus, shouldn't transfer-mode be also using the Primary …
[View More]Limit value, so
that recordings with priority less than Primary Limit couldn't distract
the output of primary device?
Patch attached.
--
Anssi Hannula
[View Less]
After an upgrade to 1.3.34 all works just fine while viewing Eurosport and
Nickelodeon.
But if I make a recording from Eurosport och Nickelodeon and replay that
recording I get audio channels "1" and "2" instead of the "nor+fin" and
"sve+dan" i get during wathcing live tv.
Is this expected behaviour or have I overlooked somethins else?
Regards,
Anders
> -----Ursprungligt meddelande-----
> Från: anders(a)sandell.net [mailto:anders@sandell.net]
> Skickat: den 7 oktober 2005 21:32
&…
[View More]gt; Till: vdr(a)linuxtv.org
> Ämne: Re: [vdr] Different languaghes on right/left channel
>
>
> Quoting Antti Hartikainen <ami+vdr(a)ah.fi>:
>
> >> To clarify:
> >>
> >> After looking closer at the audio-menu:
> >>
> >> On Eurosport there are two audio PID's "sve" which has
> swedish on the
> >> left channel and danish on the right and "nor" which has
> finnish on
> >> the left channel and norwegian on the right channel. I have chosen
> >> Swedish as my preferred languaghe and VDR correctly select
> the audio
> >> PID labeled as "sve".
> >> That PID has
> >> two langughes, and i have to select right or left channel
> in the VDR
> >> audio menu to avoid audio in swedish AND norwegian at the
> same time.
> >>
> >> My problem is that VDR does not seem to save my choice which means
> >> that i have to go into the audio menu and select left channel
> >> everytime i want to see Eurosport. The same applies to Nickelodeon.
> >
> > Whats your vdr version?
> >
> >> From 1.3.32 changelog:
> >
> > - Changed the audio PID language codes to hold up to two 3 letter
> > codes, separated
> > by '+', to store separate languages broadcast in two
> channel audio mode.
> >
> > Works fine for me at Eurosport from 1W (chooses finnish
> audio as it is
> > preferred).
> >
>
> I am running 1.3.23 here, guess I have to upgrade then ....
>
> I completely missed that changelog, sorry.
>
>
> _______________________________________________
> vdr mailing list
> vdr(a)linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
[View Less]
Hi,
yesterday I've run the LSTR command (VDR v1.3.34).
That's the session:
========== SNIP =============
VDR vdr-1.3.34 # svdrpsend.pl lstt
220 VDR SVDRP VideoDiskRecorder 1.3.34; Tue Oct 4 20:35:09 2005
...
250-5 9:8:-D-----:2115:2235:50:99:Desperate Housewives:
...
250 8 9:4:2005-10-04:2013:2230:50:99:Der Todestunnel - Nur die Wahrheit
zählt:Bei einem Unfall im Seller-Tunnel löst ein völlig übermüdeter
Lkw-Fahrer eine verheerende Brandkatastrophe aus. Staatsanwältin Sabine
Fink soll ihn …
[View More]hinter Gitter bringen, doch sie ist überzeugt, dass der
Fahrer nicht der einzig Schuldige ist. Gegen alle Widerstände rollt sie den
Fall neu auf ...
221 VDR closing connection
VDR vdr-1.3.34 #
========== SNAP =============
I wonder why the two shown timers have flags=9. I think it's OK for timer #8
because it's running. But timer #5 starts at 21:15 and the system time is
20:35. So why is it set to "currently recording"?
Can someone please explain?
Kind regards,
Andreas
[View Less]
Hi list,
I'll be releasing this and a few other patches for VDR 1.3.33, which have
evolved during the last months while working on XeatreOS (a distribution
based on LinVDR 0.7, which is used for the Xeatre boxes,
http://www.xeatre.tv/). Some of their functionality may already be included
in plugins or other patches. Nevertheless, I'd like to release them now, and
let everybody decide whether they are useful or not.
This one adds a non-selectable item in schedules whenever a date change …
[View More]
occurs.
Greetings,
Sascha
[View Less]
Hi,
attached patch should make the rcu code NPTL compatible. Without the patch
using an RCU will fail (vdr hang during startup) on an NPTL enabled system.
I have only move over L. Nussels lirc NPTL fix to the rcu code.
Greetings
Andreas
--- rcu.c.org 2005-10-21 23:29:58.000000000 +0200
+++ rcu.c 2005-10-21 23:29:36.000000000 +0200
@@ -53,7 +53,11 @@
cRcuRemote::~cRcuRemote()
{
+ int fh = f;
+ f = -1;
Cancel();
+ if (fh >= 0)
+ close(fh);
}
bool cRcuRemote::Ready(void)…
[View More]
@@ -100,7 +104,6 @@
while (Running() && f >= 0) {
- LOCK_THREAD;
if (ReceiveByte(REPEATLIMIT) == 'X') {
for (int i = 0; i < 6; i++) {
@@ -192,7 +195,6 @@
bool cRcuRemote::SendByte(unsigned char c)
{
- LOCK_THREAD;
for (int retry = 5; retry--;) {
if (SendByteHandshake(c))
@@ -225,7 +227,6 @@
bool cRcuRemote::Number(int n, bool Hex)
{
- LOCK_THREAD;
if (!Hex) {
char buf[8];
@@ -248,7 +249,6 @@
bool cRcuRemote::String(char *s)
{
- LOCK_THREAD;
const char *chars = mode == modeH ? "0123456789ABCDEF" : "0123456789-EHLP
";
int n = 0;
[View Less]
Hi,
I've made a small patch for timeline-0.9.0 to make it work with vdr-
1.3.23 (I hope Jürgen doesn't mind, but its one of the most important
plugins for me).
BR,
Christian Wieninger
Der folgende Teil dieser Nachricht enthält einen Anhang im
sogenannten Internet MIME Nachrichtenformat.
Wenn Sie Pegasus Mail oder ein beliebiges anderes MIME-kompatibles
Email-System verwenden, sollte Sie den Anhang mit Ihrem Email-System
speichern oder anzeigen können. Anderenfalls fragen Sie Ihren …
[View More]Administrator.
The following section of this message contains a file attachment
prepared for transmission using the Internet MIME message format.
If you are using Pegasus Mail, or any another MIME-compliant system,
you should be able to save it or view it from within your mailer.
If you cannot, please ask your system administrator for assistance.
---- Datei Information/File information -----------
Datei/File: timeline-0.9.0-vdr-1.3.23-patch.diff
Datum/Date: 25 Mar 2005, 11:07
Größe/Size: 3684 bytes.
Typ/Type: Unbekannt
[View Less]
this happens if the MENUTIMEOUT makes the OSD menu
disappear while a message is displayed.
Or if the driver/firmware is faulty and generates a timeout.
That is how I found it, but I can also reproduce it without
the driver timing out.
maybe the access to cSkinDisplay::Current is not
thread safe? What happens if it is deleted while
executing SetMessage?
vdr@mm:~/src$ diff -up skins.prev skins.c
--- skins.prev 2005-06-30 10:17:20.000000000 +0200
+++ skins.c 2005-06-30 10:17:10.000000000 …
[View More]+0200
@@ -191,7 +191,8 @@ eKeys cSkins::Message(eMessageType Type,
cStatus::MsgOsdClear();
}
else {
- cSkinDisplay::Current()->SetMessage(Type, NULL);
+ if (cSkinDisplay::Current())
+ cSkinDisplay::Current()->SetMessage(Type, NULL);
cStatus::MsgOsdStatusMessage(NULL);
}
}
Breakpoint 1, ~cSkinDisplay (this=0x9ef49c8) at skins.c:28
28 isyslog("~cSkinDisplay");
(gdb) bt
#0 ~cSkinDisplay (this=0x9ef49c8) at skins.c:28
#1 0x080ffceb in ~cSkinDisplayMenu (this=0x9ef49c8) at skinsttng.c:349
#2 0x080fb254 in ~cSkinClassicDisplayMenu (this=0x9ef49c8) at skinclassic.c:203
#3 0x080ddd2a in ~cOsdMenu (this=0x9ef75e8) at osdbase.c:97
#4 0x080d6d4c in ~cMenuMain (this=0x9ef75e8) at menu.c:124
#5 0x081235b5 in main (argc=14, argv=0xbfb8f9f4) at vdr.c:800
(gdb) c
Continuing.
cannot read /Musik//Deutsch/Reinhard_Mey/immer_weiter/12.Selig_sind_die_Verrückten.flac: No such file or directory
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 147463 (LWP 23498)]
0x080fec04 in cSkinClassicDisplayMessage::SetMessage (this=0x9ef4608, Type=mtInfo,
Text=0xbe9ff734 "cannot read /Musik//Deutsch/Reinhard_Mey/immer_weiter/12.Selig_sind_die_Verrückten.flac: No such file or directory")
at skinclassic.c:639
639 osd->DrawText(0, 0, Text, Theme.Color(clrMessageStatusFg + 2 * Type), Theme.Color(clrMessageStatusBg + 2 * Type), font, Setup.OSDWidth, 0, taCenter);
--
Wolfgang
[View Less]
Each bug as a separate message as requested.
Here are few bugs that I have found so far from vdr 1.3.27 with patches:
-vdr-1.3.27-enAIO-2.4.diff
-vdr-1.3.27-subtitles-0.3.7-and-ttxtsubs-0.0.5.diff
-vdr-1.3.27-finnish.diff
and plugins (and patches when needed):
-vdr-femon-0.9.0
-vdr-mp3-0.9.12
-vdr-osdteletext-0.5 + vdr-osdteletext-0.5-finnish.diff patch
-vdr-subtitles-0.3.7
-vdr-text2skin-1.1 (cvs)
-vdr-ttxtsubs-0.0.5 + vdr-ttxtsubs-0.0.5-premium-edition.diff patch
-vdr-tvonscreen-0.7.0 + vdr-…
[View More]tvonscreen-0.7.0-1.3.diff patch
-vdr-timeline-0.9.0 + vdr-1.3.25-timeline-0.9.0.diff patch
-vdr-sysinfo-0.0.4a
DVB drivers are from kernel 2.6.12.1. DVB-C card is Technotrend's FF
card (v1.5 iirc).
NTPL is disabled (export LD_ASSUME_KERNEL=2.4.1).
Bug:
VDR: Delayed live TV broadcast showing
Steps to how to reveal this:
1. Replay a recording
2. Stop replaying (shows live TV broadcast almost immediately)
3. Resume replay (press play)
4. Stop replaying
5. Resume replaying
6. Stop replaying => live TV shows after around 8s
[View Less]
Setup:
-vdr-1.3.27-enAIO-2.4.diff
-vdr-1.3.27-subtitles-0.3.7-and-ttxtsubs-0.0.5.diff
-vdr-1.3.27-finnish.diff
and plugins (and patches when needed):
-vdr-femon-0.9.0
-vdr-mp3-0.9.12
-vdr-osdteletext-0.5 + vdr-osdteletext-0.5-finnish.diff patch
-vdr-subtitles-0.3.7
-vdr-text2skin-1.1 (cvs)
-vdr-ttxtsubs-0.0.5 + vdr-ttxtsubs-0.0.5-premium-edition.diff patch
-vdr-tvonscreen-0.7.0 + vdr-tvonscreen-0.7.0-1.3.diff patch
-vdr-timeline-0.9.0 + vdr-1.3.25-timeline-0.9.0.diff patch
-vdr-sysinfo-0.0.4a
…
[View More]DVB drivers are from kernel 2.6.12.1. DVB-C card is Technotrend's FF
card (v1.5 iirc).
NTPL is disabled (export LD_ASSUME_KERNEL=2.4.1).
Bug:
VDR: Replay stops and TV channel changes
-occasionally at the beginning of the replaying of a recording VDR stops
replaying and changes to first channel of the channel list (despite what
channels was being viewed before replaying)
VDR seems to work OK otherwise.
Pasi
[View Less]