vdr April 2005

vdr@linuxtv.org

148 participants
179 discussions

DXR3, which versions to select?
by Markku Tavasti 01 Apr '05

01 Apr '05

I know this is FAQ, but unfortunately I cannot find any decent answers. So here we go: Which versions of vdr, em8300, vdr-dxr3 and should I select? I want OSD menus, so CVS version of dxr3 plugin is not sufficient. - I've searched with google - tried reading mailing list archives http://www.linuxtv.org/pipermail/vdr/ - Checked http://www.linuxtv.org/vdrwiki/index.php/Dxr3-plugin - I know http://cachalot.mine.nu/src/dxr3/ but don't know really are those with OSD or not, filenames says 'cvs something' IMHO, http://www.linuxtv.org/vdrwiki/index.php/Dxr3-plugin would be right place to answer this question. -- M. Tavasti / tavasti(a)tavastisolutions.com / +358-40-5078254

9 21

VDR, XMLTV on single channel
by jori.hamalainen＠teliasonera.com 01 Apr '05

01 Apr '05

Hi, as you know xmltv2vdr is made for complete EPG replacement for VDR. I want to add xmltv-data to EPG for some channels. For example discovery-channel has just now/next info, and I want to import full EPG for just this channel, and use DVB supplied EPG for others. This is because tv_grab_fi with all channels takes a lot of time, and I don't get satellite info from there (I've DVB-C & DVB-S -system). I modified xmltv2vdr.pl just by dropping "CLRE"-command and its response, so other channels would not clear. It ran ok, but after tuning to discovery still no extended EPG. I am guessing that to fix this I need to make EPG-scan to 0, but I don't want to do that. Any ideas? Possible ideas: - EPG scan to 0 - doesn't update other channels - modify xmltv2vdr to make "scan" -command? - change PCR pid (or what is the data pid) to false value - VDR 'auto-pid' will detect this and change it? - other problems on channel - and will not turn off 'auto-pid' because satellite entries constantly changes - change VDR EPG handling and configuration, with 'no_auto_epg'-flag on channels.conf. For example to same flag-field like polarity etc. - add SVDRP CLRE-command a parameter: channel to be cleared. Or is there more simple solutions? Best regards, Jori

2 1

Re: [vdr] scanning frequencies for analogtv
by Helmut Kodritsch 01 Apr '05

01 Apr '05

Hi I 'm using a complex architecture using a web based application, but the same can be easily realized using "scantv" utility coming with xawtv, You can scan with scantv, who return frequencies and Name stations from vbi, and then analyze his stdout with a script to compose a valid channels.conf Regards Angelo First, thanks for your tips. Is it possible to compile xawtv and further to use scantv without installed X? If it is possible, i would beg for help, because i think, no, i know ;-), i'm not able to do the scripting for composing a valid channels.conf. tia Helmut On Thu, 31 Mar 2005, Helmut Kodritsch wrote: > On Thursday 31 March 2005 00:20, Helmut Kodritsch wrote: > > hi, > > i want to use my analog TV card (bt78) with help of the analogtv-plugin > > based on a c't-vdrdevel1.3.23 machine. Is there any tool out to scan analog > > frequencies? > > I remember using kwintv for that job - it stores the frequencies as the same > numbers analogtv uses in its config-file, just need to write them down... > > I assume the format of analogtv-channels.conf entries is not the problem? > > Guido > > there is no X installed and i think kwintv needs X. > Sure, i would be glad when the scanning tool would input the right settings in the channels.conf. > Maybe there is the possibility to patch the origin vdr-channelsearch plugin to this? > > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr(a)linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

2 1

[ANNOUNCE] bitstreamout plugin 0.83 (sound loop through sound card)
by Dr. Werner Fink 01 Apr '05

01 Apr '05

Hi, I've just uploaded the bitstreamout plugin verion 0.83. Due to problems with the new Audio menu interface you have to patch the VDR version 1.3.23 with the patch vdr-1.3.23-skip.dif. After that please recompile VDR and then build the bitstreamout plugin. In my current working version 0.84 I'm able to switch Audio without that patch (removing the receiver before changing the Mpeg Audio Pid and re-attaching it afterwords) _but_ I'll get a black screen if a recording of the curent channel is started on the primary device. This is a problem in the VDR where the attachted receiver with the current Mpeg Audio Pid is not removed before starting the recording leading to a busy primary device. >From Changelog: --------------------------------------------------------------- Thu Mar 24 19:24:23 CET 2005 - Add bug fix from Marcel Wiesweg in byte handle class - Add thread locking class based on cThreadLock to get a non interrupted S/P-DIF forwarding in case of starting and handling low state of the HW buffer of the sound card. --------------------------------------------------------------- Thu Mar 24 8:24:33 CET 2005 - Drop workaround on VDR Add/DelPid bug for ptOther and the handling on `Device or resource busy' because it breaks replay part of the plugin. - Start the live forwarding thread by attaching the receiver, requires a new logic to wait on the data stream and its type. - Make MP2 Audio more synchron - Be sure to store the correct name for PCMinitial - Do not flood the syslog with mp2 messages if burst size is less than for layer II/III. --------------------------------------------------------------- Werner -- AC3 loop through sound card http://bitstreamout.sourceforge.net/ Howto http://www.vdr-portal.de/board/thread.php?threadid=1958 ------------------------------------------------------------------ "Having a smoking section in a restaurant is like having a peeing section in a swimming pool." -- Edward Burr

1 0

identifying advertisements
by Czakó Krisztián 01 Apr '05

01 Apr '05

Hello, I've found a really old thread about this topic (Proposal: cutting out advertising automatically, October 2002). And nothing since that time. Could anyone find a reliable solution? I have one simple suggestion, but I'm not a programmer or mpeg expert, so please tell me if it's a possible solution or not. Most of the advertisements seems to be louder than the "normal" sound. If you analise the sound, you'll find that it isn't louder! But if you check, you'll find that the sound track is equilezed to sound better (quiet sounds made louder), so that the average loudness is higher. So the solution could be to check the average loudness of the sound stream. Maybe a plugin can automatically check this and places cutting marks in recordings (maybe real-time?) and/or can mute/unmute (or replace picture with an "advertisement blocked" message) when watching the live stream. Regards, Krisztián

2 1

AW: Re: [vdr] scanning frequencies for analogtv
by Helmut Kodritsch 01 Apr '05

01 Apr '05

On Thursday 31 March 2005 00:20, Helmut Kodritsch wrote: > hi, > i want to use my analog TV card (bt78) with help of the analogtv-plugin > based on a c't-vdrdevel1.3.23 machine. Is there any tool out to scan analog > frequencies? I remember using kwintv for that job - it stores the frequencies as the same numbers analogtv uses in its config-file, just need to write them down... I assume the format of analogtv-channels.conf entries is not the problem? Guido there is no X installed and i think kwintv needs X. Sure, i would be glad when the scanning tool would input the right settings in the channels.conf. Maybe there is the possibility to patch the origin vdr-channelsearch plugin to this?

2 1

[ANNOUNCE] vdr-actuator-0.0.9 plugin
by Luca Olivetti 01 Apr '05

01 Apr '05

Hello, I'm releasing a new version (0.0.9) of the "actuator" plugin available at http://club.telepolis.com/l.o/vdr/ This plugin controls a linear actuator (or an horizon to horizon one) through the parallel port with a simple circuit. CHANGES: - Dutch translation by Johan Schuring <vetteblei at gmail.com> - Fast transponder/satellite scan, thanks to the wonderful work of Thomas Bergwinkl <bergwinkl.thomas at vr-web.de> who provided filter.[ch] to make it possible Bye -- - Yo también quiero una Europa libre de Patentes de Software - - I want a Software Patents Free Europe too! And you? - --------------------------------------------------------------- EuropeSwPatentFree - http://EuropeSwPatentFree.hispalinux.es

1 0

DXR3 + VGA overlay?
by Markku Tavasti 01 Apr '05

01 Apr '05

Is it possible to use VDR+dxr3 plugin outputting to VGA overlay? Plugin has functions for activating overlay, but it's not called from any place? -- M. Tavasti / tavasti(a)tavastisolutions.com / +358-40-5078254

3 5

Problem with ABC2 on a dxr3
by Malcolm Caldwell 01 Apr '05

01 Apr '05

Hello, I was just wondering if anyone else had noticed a problem with the Australian DVB-T channel ABC2 (which started broadcasts earlier this month). On my dxr3 based system the bottom 3/8 or so of the screen flickers. It seems like it only updates every other frame. The top of the frame appears normal. Has anyone else noticed this? I can post a sample of the ts that causes this if it helps anyone

4 4

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr April 2005