vdr January 2008

vdr@linuxtv.org

91 participants
103 discussions

need CAM on every DVB device?
by Simon Baxter 06 Feb '08

06 Feb '08

Hi Simple question, do you need a separate CAM for every DVB device you add? I'm receiving a cable service from a single provider and want to decode up to 2 boquets at once. Do both DVB cards need to have their own CI/CAM? Thanks Simon

3 2

new drivers
by Tony Grant 04 Feb '08

04 Feb '08

I pulled the dvb drivers with mercurial made and installed. Nothing has changed: Fire up vdr-xine which tunes to BBC 1 (horizintal polarization) vdr-xine: Client connected! [vaAVM]buffered 35,1 frames (v:39,0, a:35,1) frame: (0, 0)-(720, 576), zoom: (1,00, 1,00) Picture and sound perfect (yesterday there was a thunderstorm which blocked Eurobird from view...) ZAP to ITV 1 (vertical polarization) SetPlayMode: 0 SetAudioChannelDevice: 0 SetPlayMode: 1 [vSetDigitalAudioDevice: 0 SetAudioChannelDevice: 0 aAVMClear(0)jeu jan 17 10:25:01 CET 2008 reloading DVB driver Screen goes black and xine stops responding, needs to be killed. Not advancing very fast and running out of ideas... Tony --

4 15

vdr with control plugin and osd
by Sebastian Dellit 03 Feb '08

03 Feb '08

Hello vdr readers, I use the VDR with the e-tobi sources. To access the OSD I install the control-plugin. When I start the vdr manually all works fine, I can use the OSD e. g. on tty1. When I use the start-stop script from the installer I can't access the OSD. The options for the control plugin are correct but the start-stop-script hide the text OSD on tty1. :-( Is there are possibility to use the script with the control plugin? -- Best regards Sebastian ICQ: 264706583 | MSM: sebo(a)blinzeln.de | Skype: sebo_de | Yahoo: de_sebo E-Mail: sebo(a)blinzeln.de | Web: www.blindzeln.de

2 3

segfaults with vdr ≥ 1.5.3 (fonts issue?)
by Jan Willies 02 Feb '08

02 Feb '08

Hi, I get segfaults when trying to start a vdr version with freetype fonts support. The last working version is 1.5.2. Here are some information: http://jan.willies.info/vdr-strace.log http://jan.willies.info/vdr-gdb.log I guess my fonts installation is somewhat hosed but I really have no idea. debian lenny/sid freetype6-2.3.5-1+b1 ttf-dejavu-2.19-1 libfontconfig1-2.5.0-2 - Jan

4 4

What is H264 Spatial Direct Mode?
by Morfsta 02 Feb '08

02 Feb '08

Hi, I see a lot of channels that are not supported in VDR because of unsupported spatial direct mode in FFMPEG. This has probably been covered before (mostly in German!) but Reinhard could you explain what is spatial direct mode and why is it currently not covered in FFMPEG. Is it quite complex to code up? Do you know if there are any plans to support it? Thanks

6 12

Re: [vdr] segfaults with vdr ??? 1.5.3 (fonts issue?)
by Jan Willies 01 Feb '08

01 Feb '08

vdr(a)digestive.jpl.se wrote: > I had the same problem and I think I upgraded fontconfig and freetype > and then it worked like a charm! Thanks, but it seems you had a problem which was somewhat different than mine. This are the last log entries before VDR segfaults: ERROR: FreeType: error during FT_Render_Glyph 32, 3 ERROR: FreeType: error during FT_Render_Glyph 32, 3 ERROR: FreeType: error during FT_Render_Glyph 32, 3 > I cant remember if I posted my success on the list but that should > have been a few months ago maybe. Yeah, you did. Unfortunately for Debian lenny/sid there is no update available. - Jan > On Wed, Jan 30, 2008 at 02:49:05PM > +0100, Jan Willies wrote: >> Hi, >> >> I get segfaults when trying to start a vdr version with freetype fonts support. The last working version is 1.5.2. Here are some information: >> >> http://jan.willies.info/vdr-strace.log >> http://jan.willies.info/vdr-gdb.log >> >> I guess my fonts installation is somewhat hosed but I really have no idea. >> >> debian lenny/sid >> freetype6-2.3.5-1+b1 >> ttf-dejavu-2.19-1 >> libfontconfig1-2.5.0-2 >> >> >> - Jan >> >> _______________________________________________ >> vdr mailing list >> vdr(a)linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >

1 1

Video out both from ff dvb card and xineliboutput
by Eddi De Pieri 31 Jan '08

31 Jan '08

Hi, Does it possible to get video out both from svideo or rgb output of my s2300 ff-dvb card and from xineliboutput? If yes how to do this? Best regards, Eddi

1 0

newbie question(s)
by Theunis Potgieter 31 Jan '08

31 Jan '08

I went through the online manual at www.linuxtv.org/vdrwiki, in search of explanation of why certain keys presses appears. I'm using vdr-1.5.12 If I watch live TV and press the OK button, it will show the current/next in the info bar. By pressing Left/Right the information displayed disappears and the only way to get it back is by pressing Menu followed by OK again. Is this a bug or is it fully implemented by a plug-in? Is there any documentation of the acronyms used for example VPS and explanation? I have a single budget card: 02:0c.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) with an IR usb receiver: Bus 003 Device 002: ID 147a:e02d Formosa Industrial Computing, Inc. I use the vdr-remote plugin for using the IR remote control. I couldn't map the channel +/- keys or volume +/- keys to the remote as they appear to register as up/down keys that was already defined by remote.confand also dead keys. Should I rather try out lirc or does somebody know of how to resolve incorrect/dead keys? I also tried doing a screen capture using vdr-xine-0.8.0 with xine-lib-1.1.8, which failed with the following output: === CLEAR(-4.4) === CLEAR(-4.5) --- CLEAR(-4b) vdr: osdflush: n: 2, 20.3, timeout: 0, result: 0 AFD changed from -2 to -1 bad_frame AFD changed from -2 to -1 bad_frame vdr: osdflush: n: 1, 9.7, timeout: 0, result: 0 vdr: osdflush: n: 20, 203.1, timeout: 1, result: 2 vdr: osdflush: n: 11, 116.0, timeout: 0, result: 0 vdr: osdflush: n: 1, 12.0, timeout: 0, result: 0 vdr: osdflush: n: 2, 23.6, timeout: 0, result: 0 vdr: osdflush: n: 2, 18.9, timeout: 0, result: 0 vdr: osdflush: n: 1, 13.3, timeout: 0, result: 0 abort: xine.c:1996: xine_get_current_frame: Aborting. Aborted How would one go on to implement Afrikaans as a language for VDR, as it is my native language? Still a great product! Theunis -- The Analytical Engine weaves Algebraical patterns just as the Jacquard loom weaves flowers and leaves. -- Ada Augusta, Countess of Lovelace, the first programmer

1 0

Disabling Xineliboutput video mode switching
by Samuli Seppänen 31 Jan '08

31 Jan '08

Hi all, I have a problem with Xineliboutput's OSD. In low resolution videos it look doesn't fit the screen. It seems as if Xineliboutput actually switches the resolution of the (VGA) monitor. So how do I force Xineliboutput to first scale the _video_ to screen (not vice versa) and then put OSD (unscaled) on top of that? Thanks in advance, Samuli

3 4

vdr-rotor support patches for VDR-1.5.14
by lucian orasanu 30 Jan '08

30 Jan '08

I forgot afther that patches 3 Patch vdr-1.5.14-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff and compile ok, if i change order 3 first then 2 i get errors above compiling vdr. Luc. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr January 2008