vdr March 2011

vdr@linuxtv.org

40 participants
32 discussions

[1.7.17][Patch] Program guide scroll
by Udo Richter 19 Mar '11

19 Mar '11

Hi list, In reference to [1], and to give this a push-up, I've attached an updated patch for program guide scroll for VDR-1.7.17. The patch also fixes the non-working scrolling in longer descriptions. If anyone needs this fixed for VDR < 1.7.17, let me know. Cheers, Udo [1] http://www.linuxtv.org/pipermail/vdr/2010-June/023122.html

1 0

Re: [vdr] xineliboutput subtitle crop
by jdobry＠centrum.cz 19 Mar '11

19 Mar '11

I can try only DVB subtitles. > From: Petri Hintukainen<phintuka(a)users.sourceforge.net> > Subject: Re: [vdr] xineliboutput subtitle crop > To: VDR Mailing List<vdr(a)linuxtv.org> > Message-ID:<1300468302.18383.4870.camel@ph-laptop> > Content-Type: text/plain; charset="UTF-8" > > pe, 2011-03-18 kello 16:13 +0100, jdobry(a)centrum.cz kirjoitti: > > Looks correct, at least for DVB subtitles. Did you test only with DVB > subtitles or also with teletext subtitles ?

1 0

xineliboutput subtitle crop
by jdobry＠centrum.cz 19 Mar '11

19 Mar '11

Hello, On vdr 1.7.17 I have problem with xineliboutput and subtitles. It's oversized and cropped. Problem is probably incompatibility to change OSD layer size on 1.7.17 Here is my hotfix. I am not sure, if it is correct because I don't know vdr/xineliboutput internals. But it siply works for me. Jiri PS: many thanks for nice piece of SW, specially thanks to Klaus. --- osd.c.old 2011-03-18 15:55:32.681879469 +0100 +++ osd.c 2011-03-18 16:02:54.111874506 +0100 @@ -393,10 +393,13 @@ … [View More]

3 2

Add support for [non-standard?] DiSEqC switch "MAXIMUM DiSEqC 4/1"
by Hans Petter Selasky 14 Mar '11

14 Mar '11

Hi, The local guy over here mounted what he claimed is a fully standard 4/1 DiSEqC switch which works with every sat-receiver around. After some brief investigation, it appears this DiSEqC switch is using a non-standard? scheme, which is not supported by w_scan nor vdr. Correct me if I'm wrong. To get the switch working with VDR I need an option to turn off the switch power. This is part of the sequence to program the switch. I've attached patches for w_scan and VDR to work with the DiSEqC … [View More]switch I've got. I don't have any documentation on the switch. All the programming was the result of two days of reverse engineering. And I did not open the switch either :-) Manufacturer homepage: http://www.kjaerulff1.com/en-gb/p/30_maximum_diseqc_41_switch Information needed for VDR's diseqc.conf # # Full sequence for LNB-A # LNB.A 11700 V 9750 t F W45 v W15 W45 F W45 v W15 W45 t W45 LNB.A 99999 V 10600 t F W45 v W15 W45 F W45 v W15 W45 T W45 LNB.A 11700 H 9750 t F W45 V W15 W45 F W45 V W15 W45 t W45 LNB.A 99999 H 10600 t F W45 V W15 W45 F W45 V W15 W45 T W45 # # Full sequence for LNB-B # LNB.B 11700 V 9750 t F W45 v W15 [E0 10 26] W45 F W45 v W15 [E0 10 26] W45 t W45 LNB.B 99999 V 10600 t F W45 v W15 [E0 10 26] W45 F W45 v W15 [E0 10 26] W45 T W45 LNB.B 11700 H 9750 t F W45 V W15 [E0 10 26] W45 F W45 V W15 [E0 10 26] W45 t W45 LNB.B 99999 H 10600 t F W45 V W15 [E0 10 26] W45 F W45 V W15 [E0 10 26] W45 T W45 # # Full sequence for LNB-C # LNB.C 11700 V 9750 t F W45 v W15 [E0 10 27] W45 F W45 v W15 [E0 10 27] W45 t W45 LNB.C 99999 V 10600 t F W45 v W15 [E0 10 27] W45 F W45 v W15 [E0 10 27] W45 T W45 LNB.C 11700 H 9750 t F W45 V W15 [E0 10 27] W45 F W45 V W15 [E0 10 27] W45 t W45 LNB.C 99999 H 10600 t F W45 V W15 [E0 10 27] W45 F W45 V W15 [E0 10 27] W45 T W45 # # Full sequence for LNB-D # LNB.D 11700 V 9750 t F W45 v W15 [E0 10 27] W45 F W45 v W15 [E0 10 26] W45 F W45 v W15 [E0 10 27] W45 F W45 v W15 [E0 10 26] W45 t W45 LNB.D 99999 V 10600 t F W45 v W15 [E0 10 27] W45 F W45 v W15 [E0 10 26] W45 F W45 v W15 [E0 10 27] W45 F W45 v W15 [E0 10 26] W45 T W45 LNB.D 11700 H 9750 t F W45 V W15 [E0 10 27] W45 F W45 V W15 [E0 10 26] W45 F W45 V W15 [E0 10 27] W45 F W45 V W15 [E0 10 26] W45 t W45 LNB.D 99999 H 10600 t F W45 V W15 [E0 10 27] W45 F W45 V W15 [E0 10 26] W45 F W45 V W15 [E0 10 27] W45 F W45 V W15 [E0 10 26] W45 T W45 Good luck! I hope the patches can be included into VDR and w_scan. Not sure if this is the right list to post the patches. --HPS [View Less]

1 0

priorities in streamdev
by Rainer Blickle 13 Mar '11

13 Mar '11

Hi everybody, i have a question regarding the streamdev plugin. I have 2 tv cards, both gets accessed with the pvrinput plugin, but the problem i have would be the same with dvb devices. I also watch TV on the PC with the two cards. I have another pc (laptop) with vdr installed. There i installed the streamdev-client plugin. When switching the channel on the laptop with the up/down keys, the live picture gets interrupted with a black screen for about half a second. My wife doesn't like this … [View More]

6 20

How's the 24 bit OSD VDR coming?
by Simon Baxter 09 Mar '11

09 Mar '11

Hi Klaus - et al How's the development on vdr-1.7.17 (?) coming? I wait with baited breath!!

5 6

channels.conf fr-Paris since analog switch-off
by Nicolas Huillard 09 Mar '11

09 Mar '11

Hi all, For some reason (API/kernel mismatch or so), I can't manage to run a working DVB scan with either scan, dvbscan or w_scan, and VDR itself don't seem to catch the new transponders, whatever I do... Since this is a family urgency, I can't wait to upgrade everything needed in my VDR server (which does a lot of other things, making an emergency upgrade a bit risky) before having all channels back. What I miss is apparently only multiplex R4 (Multi4, M6, W9, NT1, etc.). I can't find … [View More]

1 1

Messages from Lirc have to be longer than 21 chars, why?
by Gerald Dachs 08 Mar '11

08 Mar '11

Hi, during my tests with eventlircd I noticed that the up key of my remote didn't work with vdr, but with xbmc. I debugged vdr and stumbled above the line lirc.c:89 (not vanilla sources): if (ready && ret > 21) { Lirc sends this to vdr: "67 0 KEY_UP devinput" So this key gets ignored, all other key have longer names and are working. Solution seems to be easy. Instead of 21 I could use 19, but with inputlircd I get this string for the same key: "67 0 KEY_UP event7" … [View More]

4 4

[announcement] Release 0.2.0 of vdr-plugin-dvdswitch
by Andreas Brachold 05 Mar '11

05 Mar '11

Hello, A new release of vdr-plugin-dvdswitch http://projects.vdr-developer.org/attachments/download/534/vdr-dvdswitch-0.… Changes: http://projects.vdr-developer.org/versions/show/169 * Read name of volume to prefill OSD-Entry with filename Fill OSD-field with capitalize volume name * Improve menu to read images * Rename image was'nt possible * used posix functions to parse commandline, create symbolic links, parse mountpoint * Improve handle of error messages * Update translations … [View More]

1 0

Two problems with vdr 1.7.16-1devel2
by Tony Houghton 01 Mar '11

01 Mar '11

I'm currently experiencing two problems with vdr 1.7.16-1devel2. The first problem is that if I fast forward or rewind, when I return to normal playback the stream resumes from wherever I started the ff/rew instead of where I stopped it. That's with vdr-sxfe on remote clients, I'm not sure whether it does the same if the client is on the same PC as vdr. The second problem is a memory leak. It's not too bad, but I have to restart VDR about twice a week to make sure there's no swapping and … [View More]

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr March 2011