Hello everyone! I'm from Argentina, and up to last month I've been using
VDR 1.7.262 with an ISDB-T USB adapter. It works really good, but the
last week I've been trying to upgrade to VDR 2.2 and I've found a
problem with ISDB-T cards: they are not supported.
As I'm really interested in using VDR, I was digging inside the code and
found a partial solution for this problem: as ISDBT is the same as DVBT,
I've changed the way delivery system is queried. My changes are applied
in a cloned repo at …
[View More]github:
https://github.com/chrodriguez/vdr/commit/dadbca57c2dc55c1c53b4fa8f68b56728…
That's the only change I've made. Now I can enjoy my fresh upgraded VDR
installation!!
I think a better refactor should be made, but for now it's working
perfectly deployed as a docker container:
https://registry.hub.docker.com/u/chrodriguez/vdr
Thanks for this wonderfull project!
--
Lic. Christian A. Rodriguez
@car_unlp
[View Less]
Occasionally my signal drops out (haven't looked into it yet), and it
causes VDR to completely freeze and become defunct/zombie. That locks
up the drivers and the only way to resolve it is by rebooting. No core
file gets created. Does anyone know how to prevent the lock-up in the
first place? Could it be some kind of leak from the looping (see log
clip below)?
Here's a clip of the log when it happens. You can see how the log gets
filled with the same repeating lines until it crashes.
2016.Oct.…
[View More]28|12:08:55 video: slow down video, duping frame
2016.Oct.28|12:08:55 video: decoder buffer empty, duping frame
(5656/167423) 7 v-buf
2016.Oct.28|12:09:29 video: slow down video, duping frame
2016.Oct.28|12:16:09 [1297] [softhddev]Clear:
2016.Oct.28|12:16:09 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:09 audio/alsa: using device 'default'
2016.Oct.28|12:16:09 audio/alsa: start delay 336ms
2016.Oct.28|12:16:09 [1297] [softhddev]Clear:
2016.Oct.28|12:16:10 audio/alsa: using device 'default'
2016.Oct.28|12:16:10 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:10 audio/alsa: start delay 336ms
2016.Oct.28|12:16:10 [1297] [softhddev]Clear:
2016.Oct.28|12:16:10 audio/alsa: using device 'default'
2016.Oct.28|12:16:10 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:10 audio/alsa: start delay 336ms
2016.Oct.28|12:16:10 [1297] [softhddev]Clear:
2016.Oct.28|12:16:10 audio/alsa: using device 'default'
2016.Oct.28|12:16:10 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:10 audio/alsa: start delay 336ms
2016.Oct.28|12:16:10 [1297] [softhddev]Clear:
2016.Oct.28|12:16:10 audio/alsa: using device 'default'
2016.Oct.28|12:16:10 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:10 audio/alsa: start delay 336ms
2016.Oct.28|12:16:10 [1297] [softhddev]Clear:
2016.Oct.28|12:16:10 audio/alsa: using device 'default'
2016.Oct.28|12:16:10 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:10 audio/alsa: start delay 336ms
2016.Oct.28|12:16:10 [1297] [softhddev]Clear:
2016.Oct.28|12:16:10 audio/alsa: using device 'default'
2016.Oct.28|12:16:10 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:11 audio/alsa: start delay 336ms
2016.Oct.28|12:16:11 [1297] [softhddev]Clear:
2016.Oct.28|12:16:11 audio/alsa: using device 'default'
2016.Oct.28|12:16:11 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:11 audio/alsa: start delay 336ms
2016.Oct.28|12:16:11 [1297] [softhddev]Clear:
2016.Oct.28|12:16:11 audio/alsa: using device 'default'
2016.Oct.28|12:16:11 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:11 audio/alsa: start delay 336ms
2016.Oct.28|12:16:11 [1297] [softhddev]Clear:
2016.Oct.28|12:16:11 audio/alsa: using device 'default'
2016.Oct.28|12:16:11 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:11 audio/alsa: start delay 336ms
2016.Oct.28|12:16:11 [1297] [softhddev]Clear:
2016.Oct.28|12:16:11 audio/alsa: using device 'default'
2016.Oct.28|12:16:11 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:11 audio/alsa: start delay 336ms
2016.Oct.28|12:16:11 [1297] [softhddev]Clear:
2016.Oct.28|12:16:11 audio/alsa: using device 'default'
2016.Oct.28|12:16:11 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:11 audio/alsa: start delay 336ms
2016.Oct.28|12:16:11 [1297] [softhddev]Clear:
2016.Oct.28|12:16:12 audio/alsa: using device 'default'
2016.Oct.28|12:16:12 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:12 audio/alsa: start delay 336ms
2016.Oct.28|12:16:12 [1297] [softhddev]Clear:
2016.Oct.28|12:16:12 audio/alsa: using device 'default'
2016.Oct.28|12:16:12 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:12 audio/alsa: start delay 336ms
2016.Oct.28|12:16:12 [1297] [softhddev]Clear:
2016.Oct.28|12:16:12 audio/alsa: using device 'default'
2016.Oct.28|12:16:12 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:12 audio/alsa: start delay 336ms
2016.Oct.28|12:16:12 [1297] [softhddev]Clear:
2016.Oct.28|12:16:12 audio/alsa: using device 'default'
2016.Oct.28|12:16:12 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:12 audio/alsa: start delay 336ms
2016.Oct.28|12:16:12 [1297] [softhddev]Clear:
2016.Oct.28|12:16:12 audio/alsa: using device 'default'
2016.Oct.28|12:16:12 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:12 audio/alsa: start delay 336ms
2016.Oct.28|12:16:12 [1297] [softhddev]Clear:
2016.Oct.28|12:16:12 audio/alsa: using device 'default'
2016.Oct.28|12:16:12 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:13 audio/alsa: start delay 336ms
2016.Oct.28|12:16:13 [1297] [softhddev]Clear:
2016.Oct.28|12:16:13 audio/alsa: using device 'default'
2016.Oct.28|12:16:13 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:13 audio/alsa: start delay 336ms
2016.Oct.28|12:16:13 [1297] [softhddev]Clear:
2016.Oct.28|12:16:13 audio/alsa: using device 'default'
2016.Oct.28|12:16:13 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:13 audio/alsa: start delay 336ms
2016.Oct.28|12:16:13 [1297] [softhddev]Clear:
2016.Oct.28|12:16:13 audio/alsa: using device 'default'
2016.Oct.28|12:16:13 [1297] ERROR: TS packet not accepted in Transfer Mode
2016.Oct.28|12:16:13 audio/alsa: start delay 336ms
2016.Oct.28|12:16:13 [1297] [softhddev]Clear:
[View Less]
Hello,
here is a patch to allow full screen (hd) screenshots with
plugin screenshot-0.0.16.
( i'm use this source : https://github.com/jowi24/vdr-screenshot )
* set setup limits to 768x576 to MAXOSDWIDTHxMAXOSDHEIGHT
* allow image size 0x0 to get current video full screen.
* set default output path from /tmp to cPlugin::CacheDirectory
* remove unused Setup::iUserKey
* and fix a typo in a osd message
Best regards,
Andreas
*ICAT-EGVE 2017 2nd Call For Participation*
22nd - 24th November, 2017, Adelaide, Australia
http://icat.vrsj.org/2017/
The ICAT-EGVE 2017 conference will be held November 22nd - 24th in
Adelaide, Australia. This is the merger of the 27th International
Conference on Artificial Reality and Telexistence (ICAT 2017) and the 22nd
Eurographics Symposium on Virtual Environments (EGVE 2017).
Together these are two of the oldest international conferences in the world
on Artificial Reality and …
[View More]Virtual Environments, and provide a unique
opportunity for researchers, developers, and users to share their
experience and knowledge of Virtual Reality, Augmented Reality,
Mixed Reality and 3D User Interfaces. This is a great opportunity to renew
old friendships, make new ones, and experience all that Adelaide has to
offer.
Adelaide is one of the most beautiful cities in Australia located by
beautiful beaches on one side and expansive mountains and desert on the
other. Famous for its festivals, food and wine, Adelaide is an ideal place
to experience Australia. Attendees will be able to visit the Barossa Valley
for some of the best wine and food in the world, see kangaroos and koala in
the local wildlife parks, learn history in the fascinating local museums or
hike through breath-taking scenery.
ICAT-EGVE 2017 seeks original, high-quality submissions describing
research, applications or systems in all areas of Virtual Reality,
Augmented Reality, Mixed Reality, Telexistence, and 3D User Interfaces.
Research papers should describe results that contributes to advancements in
the following areas:
· 3D interaction for VR/AR
· VR/AR systems and toolkits
· User studies and evaluation for VR/AR/MR
· Telexistence, Telepresence and Teleimmersion
· Haptics, audio, and other non-visual modalities
· Serious games and edutainment using VR/AR/MR
· Presence, cognition, and embodiment in VR/AR/MR
· Novel devices (both input and output) for VR, AR, MR, and haptics
· Multi-user and distributed VR, AR, teleimmersion and telepresence
· Immersive projection technologies and other advanced display
technologies
· Submissions in other related areas are welcome too
All accepted papers are going to be published in the Eurographics Digital
Library. In addition, they will be cited and indexed in the ACM Digital
Library.
We will accept submissions in three categories:
· Papers (Full or short)
· Posters
· Demonstrations
*Submission Information*
*Full papers* must be in English and not exceed eight (8) pages in length.
Short papers must be in English and not exceed four (4) pages in length.
*Posters* must be in English and not exceed two (2) pages in length.
*Demonstration* submissions consist of a description of the demonstration
not exceeding two (2) pages in length, and a video showing the
demonstration working.
ICAT-EGVE uses a double-blind review process. Therefore, submissions should
not contain information (including citations and optional videos) that
unnecessarily identifies the authors or their institutions or places of
work. All content must be submitted electronically as PDF. Authors are
encouraged to submit videos to aid the program committee in the review of
their submissions.
All submissions will be reviewed by the paper committee, poster chairs or
demonstration chairs. All accepted papers are going to be published in the
Digital Library of the Eurographics. In addition, they are going to be
cited and indexed in the ACM Digital Library, including the DOI. Accepted
posters and demonstrations will be published in the proceedings and in the
Eurographics Digital Library.
Note: Submissions should be original, unpublished work, and should not be
in submission to other venues concurrently. Any dual submissions will be
rejected outright without review.
*Deadlines*
Sept 8 Paper submission deadline
Oct 6 Notification of paper results
Oct 20 Poster/Demo submission deadline
Oct 23 Camera-ready paper version due
Oct 27 Notification of poster/demo results
Nov 22 Conference starts
The deadlines are Anywhere on Earth for those dates.
*Best Papers*
The authors of the best papers (selected by the award committee) will be
invited to submit an extended version of their paper to either the journal
Presence or the Computers and Graphics journal.
*Conference Committee*
*Conference Co-Chairs*
Mark Billinghurst, University of South Australia, Australia
Ross Smith, University of South Australia, Australia
*Program Chairs*
Daisuke Iwai, Osaka University, Japan
Gerd Bruder, University of Central Florida, USA
Rob Lindeman, University of Canterbury, New Zealand
*Demo Chair*
Arindam Dey, University of South Australia, Australia
*Poster Chair*
Tony Huang, University of Tasmania, Australia
*Local Arrangements Chair*
Stewart Von Itzstein, University of South Australia, Australia
*Web Chair*
Neven ElSayed, University of South Australia, Australia
[View Less]
*ICAT-EGVE 2017 Call For Participation*
22nd - 24th November, 2017, Adelaide, Australia
http://icat.vrsj.org/2017/
The ICAT-EGVE 2017 conference will be held November 22nd - 24th in
Adelaide, Australia. This is the merger of the 27th International
Conference on Artificial Reality and Telexistence (ICAT 2017) and the 22nd
Eurographics Symposium on Virtual Environments (EGVE 2017).
Together these are two of the oldest international conferences in the world
on Artificial Reality and Virtual …
[View More]Environments, and provide a unique
opportunity for researchers, developers, and users to share their
experience and knowledge of Virtual Reality, Augmented Reality, Mixed
Reality and 3D User Interfaces. This is a great opportunity to renew old
friendships, make new ones, and experience all that Adelaide has to offer.
Adelaide is one of the most beautiful cities in Australia located by
beautiful beaches on one side and expansive mountains and desert on the
other. Famous for its festivals, food and wine, Adelaide is an ideal place
to experience Australia. Attendees will be able to visit the Barossa Valley
for some of the best wine and food in the world, see kangaroos and koala in
the local wildlife parks, learn history in the fascinating local museums or
hike through breath-taking scenery.
ICAT-EGVE 2017 seeks original, high-quality submissions describing
research, applications or systems in all areas of Virtual Reality,
Augmented Reality, Mixed Reality, Telexistence, and 3D User Interfaces.
Research papers should describe results that contributes to advancements in
the following areas:
· 3D interaction for VR/AR
· VR/AR systems and toolkits
· User studies and evaluation for VR/AR/MR
· Telexistence, Telepresence and Teleimmersion
· Haptics, audio, and other non-visual modalities
· Serious games and edutainment using VR/AR/MR
· Presence, cognition, and embodiment in VR/AR/MR
· Novel devices (both input and output) for VR, AR, MR, and haptics
· Multi-user and distributed VR, AR, teleimmersion and telepresence
· Immersive projection technologies and other advanced display
technologies
· Submissions in other related areas are welcome too
All accepted papers are going to be published in the Eurographics Digital
Library. In addition, they will be cited and indexed in the ACM Digital
Library.
We will accept submissions in three categories:
· Papers (Full or short)
· Posters
· Demonstrations
*Submission Information*
*Full papers* must be in English and not exceed eight (8) pages in length.
Short papers must be in English and not exceed four (4) pages in length.
*Posters* must be in English and not exceed two (2) pages in length.
*Demonstration* submissions consist of a description of the demonstration
not exceeding two (2) pages in length, and a video showing the
demonstration working.
ICAT-EGVE uses a double-blind review process. Therefore, submissions should
not contain information (including citations and optional videos) that
unnecessarily identifies the authors or their institutions or places of
work. All content must be submitted electronically as PDF. Authors are
encouraged to submit videos to aid the program committee in the review of
their submissions.
All submissions will be reviewed by the paper committee, poster chairs or
demonstration chairs. All accepted papers are going to be published in the
Digital Library of the Eurographics. In addition, they are going to be
cited and indexed in the ACM Digital Library, including the DOI. Accepted
posters and demonstrations will be published in the proceedings and in the
Eurographics Digital Library.
Note: Submissions should be original, unpublished work, and should not be
in submission to other venues concurrently. Any dual submissions will be
rejected outright without review.
*Deadlines*
Sept 8 Paper submission deadline
Oct 6 Notification of paper results
Oct 20 Poster/Demo submission deadline
Oct 23 Camera-ready paper version due
Oct 27 Notification of poster/demo results
Nov 22 Conference starts
The deadlines are Anywhere on Earth for those dates.
*Best Papers*
The authors of the best papers (selected by the award committee) will be
invited to submit an extended version of their paper to either the journal
Presence or the Computers and Graphics journal.
*Conference Committee*
*Conference Co-Chairs*
Mark Billinghurst, University of South Australia, Australia
Ross Smith, University of South Australia, Australia
*Program Chairs*
Daisuke Iwai, Osaka University, Japan
Gerd Bruder, University of Central Florida, USA
Rob Lindeman, University of Canterbury, New Zealand
*Demo Chair*
Arindam Dey, University of South Australia, Australia
*Poster Chair*
Tony Huang, University of Tasmania, Australia
*Local Arrangements Chair*
Stewart Von Itzstein, University of South Australia, Australia
*Web Chair*
Neven ElSayed, University of South Australia, Australia
[View Less]