vdr

vdr@linuxtv.org

6731 discussions

Feature requests
by Pasi Juppo 16 May '07

16 May '07

Hi, There are couple of annoying problems in vdr (v1.4.4 at least but most likely also in never ones): 1) If there is data stream problems in a channel VDR initiates emergency exit. This can be a temporary situation and gets fixed in few seconds to minutes. To solve this: change to other channel and infor user via OSD ("Channel not available" or something similar) 2) If there is no data comming from the channel (e.g. new decrypting card that needs to be updated first before it is ready to be used or for some reason the key is not available) VDR initiates emergency exit. Unnecessary action and user can do shutdown action if this is really a problem. To solve this: do not initiate emergency exit but show message in OSD ("Channel not available"). Basically every unnecessary exit should be avoided because it does not provide any advantage to the user - just the opposite. Problems should be informed to the user and let user decide what to do in case of long lasting problem such as missing data stream. Minor feature that would be nice: 3) If there is a problem like crash with VDR and a timed recording did not get recorded VDR simply deletes the timer without notifying user. Of course the timer as such is useless but it would be nice to see that this and this recording was not done at all, was not started in time or was not recorded fully. This way the program can be re-recorded if/when it is broadcasted again. And if this information can be asked from VDR then epgsearch or other plugins can try to find missed programs again automatically. Br, Pasi

1 0

Best settings..
by JJussi 14 May '07

14 May '07

Hi! I have very simple and still hard question.. At vdr pluging setup - xineliboutput - Video. Post processing (ffmpeg) and Deinterlaceing. What ARE best values (to select) when you have HD LCD (via DVI) as TV and enough CPU power (Intel Core 2 Duo) to use. I think that I'm not only one who thinks that there is too many choices.. ;-) -- JJussi

4 5

[ANNOUNCE] VDR sync early patch
by Jan Willies 14 May '07

14 May '07

Great patch, thank you very much! Now the dxr3 runs very smoothly and I don't need to be frightened while switching channels. I strongly suggest this patch for everyone with a dxr3-card! Keep up the good work! - jcw

2 3

Q: dvd-plugin and softdevice
by Harald Milz 14 May '07

14 May '07

Hi, I would like to use the dvd plugin (CVS as of today) together with softdevice-0.4.0. Plays DVDs fine but no sound. In the plugin's source code there's in player-dvd.c: BitStreamOutActive = false; HasBitStreamOut = (cPluginManager::GetPlugin("bitstreamout") != NULL); SoftDeviceOutActive = false; HasSoftDeviceOut = (cPluginManager::GetPlugin("xine") != NULL); Shouldn't the plugin also check for softdevice? player-dvd.h says static bool SoftDeviceOutActive; // currently used to switch for xine static bool HasSoftDeviceOut; // currently used to switch for xine Hmmm - However - this patch --- player-dvd.c.ORIG 2006-04-09 20:35:53.000000000 +0200 +++ player-dvd.c 2007-05-11 18:50:22.871312099 +0200 @@ -577,7 +577,8 @@ HasBitStreamOut = (cPluginManager::GetPlugin("bitstreamout") != NULL); SoftDeviceOutActive = false; - HasSoftDeviceOut = (cPluginManager::GetPlugin("xine") != NULL); + HasSoftDeviceOut = (cPluginManager::GetPlugin("xine") != NULL) || + (cPluginManager::GetPlugin("softdevice") != NULL); cSetupLine *slBitStreamOutActive = NULL; if(HasBitStreamOut) { leads to May 11 18:52:00 linvdr vdr: [3894] dvd-plugin: SoftDeviceOutActive=1, HasSoftDeviceOut=1 but still no sound, but a whole lot of May 11 18:52:20 linvdr vdr: [3894] ERROR: dvd-plugin iframeassembler full 524772 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] samplerate: 22050Hz, channels: #2 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] Device 'spdif-48', Samplerate 22050 Channels 2 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] Period size 1152 Buffer size 6915 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] Hardware initialized May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] samplerate: 48000Hz, channels: #2 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] Device 'spdif-48', Samplerate 48000 Channels 2 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] Period size 1152 Buffer size 9216 May 11 18:52:20 linvdr vdr: [3982] [softdevice-audio] Hardware initialized spdif-48 is a plug that resamples everything to 48 kHz: pcm.spdif-48 { type plug slave.pcm "spdif" slave.rate 48000 } Seems softdevice-audio doesn't get any useful data from dvd: [mp2 @ 0xb79e7148]header missing skiping one byte and libdvdnav: Using dvdnav version 0.1.10 from http://dvd.sf.net libdvdnav: DVD Title: VDRCONVERT_11-05-2007 libdvdnav: DVD Serial Number: 464496BE00000000 libdvdnav: DVD Title (Alternative): libdvdnav: Unable to find map file '//.dvdnav/VDRCONVERT_11-05-2007.map' libdvdnav: DVD disk reports itself with Region mask 0x00000000. Regions: 1 2 3 4 5 6 7 8 libdvdnav: Language 'de' not found, using 'en' instead libdvdnav: Menu Languages available: en libdvdnav: Language 'de' not found, using 'en' instead libdvdnav: Menu Languages available: en libdvdnav: Language 'de' not found, using 'en' instead libdvdnav: Menu Languages available: en libdvdnav: Language 'de' not found, using 'en' instead libdvdnav: Menu Languages available: en libdvdnav: Language 'de' not found, using 'en' instead libdvdnav: Menu Languages available: en libdvdnav: Language 'de' not found, using 'en' instead libdvdnav: Menu Languages available: en [mpegdecoder] Error! Codec 86020 not supported by libavcodec [mpegdecoder] Error! Codec 86020 not supported by libavcodec The DVD was created using vdrconvert-CVS and plays fine on my standalone DVD player, so no region code and the generic name. Is that vdrconvert's error? ??? -- Blood is thicker than water, and much tastier.

3 3

[ANNOUNCE] vdr-dxr3 version 0.2.7
by Ville Skyttä 12 May '07

12 May '07

Version 0.2.7 of the vdr-dxr3 plugin is out. Changes since 0.2.6: - add Polish translation (Mikolaj Tutak) - sync "make install" with VDR 1.4.2-2 (Ville Skyttä) - use cCondWait::SleepMs() instead of usleep (Ville Skyttä) - avoid deprecation warnings with newish libavcodec (Ville Skyttä) - add brightness/contrast/saturation settings to setup (Ville Skyttä) - apply more settings immediately from setup menu (Ville Skyttä) - apply AC3 and WSS patches which were in patches/ in previous releases - add setup option for enabling/disabling WSS (Ville Skyttä) - various minor tweaks Until I can reach Christian and/or he has time to upload the release tarball to the usual location @ SourceForge, it's available at http://cachalot.mine.nu/src/dxr3/vdr-dxr3-0.2.7.tgz

2 1

[PATCH] dynamically sized ringbuffers v2
by Artur Skawina 12 May '07

12 May '07

Auto sized ringbuffers, changes since v1: - increased maximum sizes for a few rb users. Most of the time just a small part will be used, but there will be more room for times when more is required. - a little smarter cRingBufferLinear::Read(), handles the TS buffer better. - faster buffer growth. Also makes it less likely that there won't be an opportunity to resize before an overflow. - a potentially sleeping cRecorder:Receive(). Mostly to find out how much more buffer/time would have been needed, ie debugging. - more verbose logging. It still wouldn't surprise me if this version caused a few overflows, but hopefully these will be very rare. artur diff --git a/dvbdevice.c b/dvbdevice.c index 955483e..20dcf29 100644 --- a/dvbdevice.c +++ b/dvbdevice.c @@ -1184,7 +1184,7 @@ bool cDvbDevice::OpenDvr(void) CloseDvr(); fd_dvr = DvbOpen(DEV_DVB_DVR, CardIndex(), O_RDONLY | O_NONBLOCK, true); if (fd_dvr >= 0) - tsBuffer = new cTSBuffer(fd_dvr, MEGABYTE(2), CardIndex() + 1); + tsBuffer = new cTSBuffer(fd_dvr, MEGABYTE(8), CardIndex() + 1); return fd_dvr >= 0; } diff --git a/recorder.c b/recorder.c index 8bb1621..3c0e002 100644 --- a/recorder.c +++ b/recorder.c @@ -157,8 +157,20 @@ void cRecorder::Receive(uchar *Data, int Length) { if (Running()) { int p = ringBuffer->Put(Data, Length); - if (p != Length && Running()) + if (p != Length && Running()) { + for (int ms=20; ms<1000; ms+=ms) { + cCondWait::SleepMs(ms); + if (!Running()) + return; + int r = ringBuffer->Put(Data+p, Length-p); + p += r; + if (r) + dsyslog("saved extra %d bytes in recorder ring buffer after %d ms delay", r, ms); + if (p == Length || !Running()) + return; + } ringBuffer->ReportOverflow(Length - p); + } } } diff --git a/remux.c b/remux.c index da805b7..bd29b2f 100644 --- a/remux.c +++ b/remux.c @@ -1851,7 +1851,7 @@ void cTS2PES::ts_to_pes(const uint8_t *Buf) // don't need count (=188) // --- cRemux ---------------------------------------------------------------- -#define RESULTBUFFERSIZE KILOBYTE(256) +#define RESULTBUFFERSIZE MEGABYTE(2) cRemux::cRemux(int VPid, const int *APids, const int *DPids, const int *SPids, bool ExitOnFailure) { diff --git a/ringbuffer.c b/ringbuffer.c index 0633bd3..39cc02e 100644 --- a/ringbuffer.c +++ b/ringbuffer.c @@ -151,13 +151,30 @@ void cRingBufferLinear::PrintDebugRBL(void) } #endif +// cRingBufferLinear are dynamically sized, or at least we can pretend they are ;) +// We treat 'Size' as the maximum size, but start with a small buffer, which can +// grow later as it fills up. Memory is always allocated for the full buffer, but +// the unused RAM portion remains untouched until (if at all) it is actually needed. +// Note that we can not start with a larger than requested buffer because there are +// ring buffer users that cause crashes then (eg softdevice mpegdecoder absolutely +// needs 32/64k). + +// Startup size. 64k still causes overflows before buffer starts to grow, 128k doesn't. +// The buffers grow to 200..500k anyway, so maybe increasing this a bit more would +// make sense, but let's first see if it's really needed. +// In fact 128k is on the low side, but let's try not going for 256k yet. +#define DEFRBSIZE KILOBYTE(128) + cRingBufferLinear::cRingBufferLinear(int Size, int Margin, bool Statistics, const char *Description) -:cRingBuffer(Size, Statistics) +:cRingBuffer(min(Size,DEFRBSIZE), Statistics) { description = Description ? strdup(Description) : NULL; tail = head = margin = Margin; gotten = 0; buffer = NULL; + maxsize = Size; + growbuf = 0; + dsyslog("New ring buffer \"%s\" size: %d margin: %d", description, Size, Margin ); if (Size > 1) { // 'Size - 1' must not be 0! if (Margin <= Size / 2) { buffer = MALLOC(uchar, Size); @@ -183,6 +200,8 @@ cRingBufferLinear::~cRingBufferLinear() #ifdef DEBUGRINGBUFFERS DelDebugRBL(this); #endif + dsyslog("Deleting ring buffer \"%s\" size: %d / %d (used %g%% of requested size)", description, + size, maxsize, size/(double)maxsize*100.0 ); free(buffer); free(description); } @@ -205,8 +224,21 @@ void cRingBufferLinear::Clear(void) EnablePut(); } +// Must only be called by the producer (ie Read()/Put()), not the consumer (Get()). +void cRingBufferLinear::GrowBuffer(void) +{ + size = min(size+size, maxsize); + dsyslog("Enlarging ring buffer \"%s\": %d bytes (trigger %d)", + description, size, growbuf); + growbuf = 0; +} + int cRingBufferLinear::Read(int FileHandle, int Max) { + if (Available() >= size/2) + growbuf = 1; + if (growbuf && head>=tail && size<maxsize) + GrowBuffer(); int Tail = tail; int diff = Tail - head; int free = (diff > 0) ? diff - 1 : Size() - head; @@ -219,6 +251,10 @@ int cRingBufferLinear::Read(int FileHandle, int Max) Count = safe_read(FileHandle, buffer + head, free); if (Count > 0) { int Head = head + Count; + if (Available()+Count >= size/2) + growbuf = 2; + if (growbuf && head>=tail && size<maxsize) + GrowBuffer(); if (Head >= Size()) Head = margin; head = Head; @@ -245,6 +281,10 @@ int cRingBufferLinear::Read(int FileHandle, int Max) int cRingBufferLinear::Put(const uchar *Data, int Count) { if (Count > 0) { + if (Available()+Count >= size/2) + growbuf = 3; + if (growbuf && head>=tail && size<maxsize) + GrowBuffer(); int Tail = tail; int rest = Size() - head; int diff = Tail - head; diff --git a/ringbuffer.h b/ringbuffer.h index dba0e61..9e7268c 100644 --- a/ringbuffer.h +++ b/ringbuffer.h @@ -18,11 +18,11 @@ private: cCondWait readyForPut, readyForGet; int putTimeout; int getTimeout; - int size; time_t lastOverflowReport; int overflowCount; int overflowBytes; protected: + int size; tThreadId getThreadTid; int maxFill;//XXX int lastPercent; @@ -59,7 +59,10 @@ private: int margin, head, tail; int gotten; uchar *buffer; + int growbuf; + int maxsize; char *description; + void GrowBuffer(void); public: cRingBufferLinear(int Size, int Margin = 0, bool Statistics = false, const char *Description = NULL); ///< Creates a linear ring buffer.

6 8

[ANNOUNCE] VDR version 1.4.7 released
by Klaus Schmidinger 12 May '07

12 May '07

VDR version 1.4.7 is now available at ftp://ftp.cadsoft.de/vdr/vdr-1.4.7.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.6-1.4.7.diff A 'diff' against the latest maintenance patch is available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.4.6-1-1.4.7.diff A summary of all the major changes since the last stable version can be found at http://www.cadsoft.de/vdr/download.htm This version is binary compatible with the previous version, so plugins don't need to be recompiled. Thanks to the many people who have contributed in the making, testing and debugging of this new version of VDR. Have fun! Klaus

1 0

CAM not work - anyone help??
by Simon Baxter 11 May '07

11 May '07

Hi. I've posted loads of posts on this and the linux-dvb forums, trying to get help with my Irdeto CAM and TechnoTrend 1500-C. I've had almost no responses, and certainly found no help anywhere.

1 0

A few observations on the vdr project
by mikke＠ihku.org 11 May '07

11 May '07

Hello! I would like to share some of thoughts on what I have observed over a short periode of time. I've been following the mailing list, I don't have practically any knowledge in programming so I won't even try to comment on the technical details of the vdr project itself. I would also like to point out that this is not an invitation to a discussion from my part as I wont be able to participate due to time constraint in my private life. I am also a huge fan of the vdr project and I'm in the process of building a htpc running vdr myself :) This is how I feel I am able to contribute to the project without having actual coding knowledge. Hopefully no one is offended by anything I say, as I'm not trying to point out any incompetence in anyone. Enough jibberish, I'll get to the point at hand, now. In my opinion the vdr project is sliding into a bad direction, not code wise. I don't know if an actual roadmap exists somewhere about the planned features for the 1.5-devel series but there should be one. The devel series looks like it's getting flooded with new features, which is great ofcourse and shows that people are contributing to the project. But this is where I see a risk and it looks something like this: The stable version of vdr (1.4.6.something at the time being afaik) get's "older" all the time and only the most vital parts from the devel-branch get backported. Now that is not a problem on it's own, stability is good, but if the 1.5 devel branch gets new features constantly with no feature freeze in site...hopefully people understand where I'm going with this. I'll once again remind everyone reading this that I don't have all the facts concerning this project at hand and there might very well be a roadmap which is strictly followed, and if this is the case all is good and you can ignore this message =) Last but not least, Huge Props to all the people working on this project, contributing in whatever way they can and thanks for creating something I can put on a computer, hand the remote to the mrs and tell her to record whatever she wants and not have to worry about it breaking down. This was my attempt to contribute to this project. -- gnarlie PS. I didn't spellcheck this!

11 27

mplayer with dvd-menu support
by Igor Nikanov 11 May '07

11 May '07

Hello are there any plans to include in the mplayer-plugin a possibility for dvd play with dvd-menu support ? regards Igor

2 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr