vdr

vdr@linuxtv.org

6731 discussions

Announce: videgor-0.0.3
by Kendy Kutzner 05 Jan '06

05 Jan '06

Hi, Aenderungen im Vergleich zur Version 0.0.2 sind: - IGOR jetzt in Version 0.1.2: - schreibt statt auf console in ein Logfile - Installation von libigor.h korrigiert - dvdrvidtrans jetzt in Version 0.1.1 - mehrfaches free() beim Publizieren der Videosourcen verhindert Wie auch bisher, freuen wir uns ueber Bug-Reports und Patches. Viel Spass, Kendy --

1 2

VDR-1.3.37: retuning -- possibly a fix for VDSB
by Reinhard Nissl 04 Jan '06

04 Jan '06

Hi, the attached patch introduces some timeouts while the device is tuning and when it looses the lock: DISEQC_REPEAT_TIMEOUT (500 ms) is used to repeat the DiSEqC signalling in case the where a multiswitch receives at first a malformed message and therefore doesn't switch. TUNE_TO_RETUNE_TIMEOUT (3000 ms) is used to instruct the device to start the tuning operation once again in case the above DiSEqC signalling doesn't work. LOST_LOCK_TO_RETUNE_TIMEOUT (500 ms) lets the device retune after a LOCKED to NOT LOCKED transition, probably under bad reception conditions. Please give the patch a try and report success or failure. Tests of special interest: - bad reception conditions (DVB-T) - steering dishes Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

5 23

Multiple MediaMVPs and parallel viewing
by Peer Oliver Schmidt 04 Jan '06

04 Jan '06

Hi, after I got my MediaMVP running with both mediamvp plugin and the vompserver, I am getting greedy :-) Is it possible to stream different programms to different MVPs? i.e. I want one person to watch in the living room a documentary, while another person watches the latest sports, and the third person is watching a recording. Anyone has any experience with this? TIA. -- Best regards Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA

2 2

duplicate phrase entries in i18n.c
by Lucian Muresan 04 Jan '06

04 Jan '06

Hi, I found that each of the following entries occur twice in i18n.c, and as far as I understood the the code, there is no way that both occurances will ever get used, only the first one. Most of them are even equally translated in various languages, some even lack translations, or maybe they are candidates for different contexts and preceding them with some string$ (for example "Record" for sure gets drawn on a coloured red button once and may not fit if too long, but I don't know if there is another context, haven't lookd at every occurance of tr("Record") in the source code)? { "Summary", { "Menu", { "Play", { "Stop", { "Record", If tey will be (or at least for those of them that will be) reduced to just one, maybe translators should also tell their opinion on which translation they prefer (there ara also minor differences with special characters). I attached a plain text file with them pasted side-by-side, maybe there will be some feedback for Klaus... Lucian Theesa are duplicates: { "Summary", { "Menu", { "Play", { "Stop", { "Record", This is how they look like, side-by-side { "Summary", { "Summary", "Inhalt", "Inhalt", "Vsebina", "Vsebina", "Sommario", "Sommario", "Inhoud", "Inhoud", "Resumo", "Resumo", "Résumé", "Résumé", "Sammendrag", "Sammendrag", "Yhteenveto", "Yhteenveto", "Zawartosc", "Zawartosc", "Resúmen", "Resumen", "Ðåñéå÷üìåíï", "Ðåñéå÷üìåíï", "Sammanfattning","Sammanfattning", "Detalii", "Cuprins", "Tartalom", "Tartalom", "Sinopsi", "Resum", "ŸßØáÐÝØÕ", "ŸßØáÐÝØÕ", "SadrŸaj", "SadrŸaj", "Kokkuvõte", "Kokkuvõte", "Omtale", "Omtale", { "Menu", { "Menu", "Menü", "Menü", "Meni", "Meni", "Menù", "Menù", "Menu", "Menu", "Menu", "Menu", "Menu", "Menu", "Meny", "Meny", "Valikko", "Valikko", "Menu", "Menu", "Menú", "Menu", "Måíïý", "Ìåíïý", "Meny", "Meny", "Meniu", "Meniu", "Menü", "Menü", "Menú", "Menú", "ŒÕÝî", "ŒÕÝî", "Izbor", "Izbor", "Menüü", "Menüü", "Menu", "Menu", { "Play", { "Play", "Wiedergabe", "Wiedergabe", "Predvajaj", "Predvajaj", "Riproduci", "Riproduci", "Afspelen", "Weergeven", "Play", "",// TODO "Lire", "Lecture", "Spill av", "",// TODO "Toista", "Toista", "Odtwarzac", "Odtworzenie", "Play", "Reproducir", "ÁíáìåôÜäïóç", "AíáìåôÜäïóç", "Spela upp", "Spela upp", "Redare", "Redare", "Lejátszani", "Lejátszás", "Reproduir", "Reproduir", "²ÞáßàÞØ×ÒÕáâØ","²ÞáßàÞØ×ÒÕÔÕÝØÕ", "Start", "Start", "Start", "Start", "Afspil", "Afspil", { "Stop", { "Stop", "Ende", "Stop", "Konec", "Ustavi", "Fine", "Stop", "Einde", "Stop", "Fim", "Stop", "Fin", "Stop", "Slutt", "",// TODO "Lopetus", "Lopeta", "Koniec", "Stop", "Fin", "Parar", "ÔÝëïò", "TÝñìá", "Slutar", "Stoppa", "Sfârºit", "Stop", "Vége", "Stop", "Fi", "Aturar", "ºÞÝÕæ", "ÁâÞß", "Kraj", "Stop", "Stopp", "Stopp", "Stop", "Stop", { "Record", { "Record", "Aufnehmen", "Aufnehmen", "Posnemi", "Snemaj", "Registra", "Registra", "Opnemen", "Opnemen", "Gravar", "",// TODO "Enregistre", "Enregistrement", "Ta opp", "",// TODO "Tallenna", "Tallenna", "Nagrywac", "Nagrywac", "Grabar", "Grabar", "ÅããñáöÞ", "EããñáöÞ", "Inspelning", "Spela in", "Înregistr.", "Înregistrare", "Felvenni", "Felvenni", "Gravar", "Gravar", "·ÐßØáì", "·ÐßØáì", "Snimi", "Snimaj", "Salvesta", "Salvestamine", "Optag", "Optag",

2 1

Hauppauge MediaMVP mvp-plugin Contacting Server Problem
by Peer Oliver Schmidt 04 Jan '06

04 Jan '06

Hi, I am trying to get the plugin to talk to my mediamvp box. I am using the ctvdr4, and using all the packages from their, i.e. vdrdevel and vdrdevel-plugin-mediamvp. The Hauppauge box boots, downloads the dongle.bin. It waits on Contacting Server I am seeing a packet with ethereal every 8 seconds, but no responds from the plugin. Using mvpserver stand-alone displays at least a menue on the mediamvp and allows for some internet radio. I have tried various dongle version (allways changing the version number with in VDR [and restarting VDR afterwards]) I tried the dongle versions people recommend on the VDR-Forum, but have no luck. Any idea how to troubleshoot this problem further? -- Best regards Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA

3 7

Anyone recorded Seewolf on 3SAT? and EPGSEARCH
by Peter Juszack 04 Jan '06

04 Jan '06

Hi list, is there anybody out there who recorded the first part of Seewolf broadcasted yesterday on 3SAT ? Unfortunately I missed the program. I searched the EPG and also went to tvtv.de but it seems that it will not be repeated. I am interested in the VDR-files. I would prefer a DVD because I am connected via ISDN. Just another topic: When comparing VDR to the Technisat SAT-HD-Recorder of my father I recognized that the Technisat EPG allows to jump between the next days by tabs. I planned to modify the epgsearch-plugin to do the same. When looking for free keys to implement that I found the forward and rewind keys which jump X minutes forwards or back. X can be set in the epgsearch setup and I set it to 1440 (=24*60 = 1 day). Works perfectly: User defined time 1 = 20:20. Then pressing forward key and the epg shows the program of tomorrow primetime. Maybe someone finds this useful. A big thank to Christian for the real great epgsearch plugin. Regards Peter http://www.unterbrecher.de - Old motorcycles

1 0

maybe two bugs in vdr
by CopyPoint 04 Jan '06

04 Jan '06

Hi all, i found two behaviers in 1.3.32 that IMHO shouldn't be like this 1. If i try to switch to channel 2222 without having 222 vdr stops accepting keys after 22. 2. One can't move a channel into an empty group. Can anyone confirm this? regards Thorsten

5 6

receive data with low prio, so user-action can detach the receiver
by Patrick(gmx) 03 Jan '06

03 Jan '06

Hello I still try to write a Plugin which a background receiving of data. For example I have 3 devices. I want the last device to receive data only from "Transponder A" with "PID X". This should be a very high prio. The user should tune as he likes. Now I want to receive "Transponder B" with "PID Y", but with a low Prio. So the user don't observe it. The low prio receiver should be detached if a user need the device. The Problem is that the user action don't detach the receiver. How can I implement it? Patrick So I have written this code: #define PRIORECEIVER 59 struct sReceiverID{ cDevice *device; cPTSReceiver *receiver; int originalNetworkId; int transportStreamId; int serviceId; int vpid; }; /** * Start listening for PTS values on the given service. * * Step1. create the channel for the values * Step2. get next free receiver position in array * Step3. test if allready a receiver is listen to the values, if exist return * Step4. test if allready a receiver is listen on same transponder. if exist create a new receiver and add to same device. return * Step5. test if static device can receive data. If it could, create a device and add to static device and return * Step6. test all other devices and add the first fit device. return * Step7. return with false. No device can handel a receiver with this valuse. */ bool ctuner::addPTSStream(int originalNetworkId, int transportStreamId, int serviceId){ //DEBUG /* for (int b=0;b<MAXRECEIVERS;b++){ if (receiverID[b].originalNetworkId){ dsyslog("receiverID[%d].",b); dsyslog(" %d) ONID: %d",b,receiverID[b].originalNetworkId); dsyslog(" %d) TSID: %d",b,receiverID[b].transportStreamId); dsyslog(" %d) SID: %d \n",b,receiverID[b].serviceId); dsyslog(" lisen on device[%d]",receiverID[b].device->DeviceNumber()); } }; */ //DEBUG END //create the fitting channel for the originalNetworkId, transportStreamId and serviceId cChannel *channel = GetChannelBy_ONID_TID_SID(originalNetworkId,transportStreamId,serviceId); if(!channel)return false;//can't read channel from file else{ // dsyslog("channels with originalNetworkId = %d, transportStreamId = %d and serviceId = %d was found and has VPID=%d",originalNetworkId,transportStreamId,serviceId,channel->Vpid()); } //create a receiver for the VPID cPTSReceiver *receiver = NULL; int a; for (a=0;((receiverID[a].receiver!=NULL) && (a<MAXRECEIVERS));a++){}; if (receiverID[a].receiver){ esyslog("MAXRECEIVER reached"); return false;//max receivers was reached } //check if already a receiver is set to the originalNetworkId, transportStreamId and serviceId. // if a receiver with the same originalNetworkId, transportStreamId and serviceId were found, // no new receiver was needed. for(int i=0;i < MAXRECEIVER;i++){ if ((receiverID[i].originalNetworkId == originalNetworkId) && (receiverID[i].transportStreamId == transportStreamId) && (receiverID[i].serviceId == serviceId)){ //there is already a receiver set to this IDs //dsyslog("There is already a receiver listen to the IDS: %d, %d ,%d",originalNetworkId, transportStreamId, serviceId); return true;//not need to attach new receiver } }//no receiver found for this IDs lets create a new receiver //dsyslog("VPID from channel is: %d",channel->Vpid()), receiver = new cPTSReceiver(channel->Vpid()); if(!receiver){ dsyslog("receiver failed"); return false; } receiverID[a].receiver = receiver; receiverID[a].originalNetworkId =0;//will be set later receiverID[a].transportStreamId =0;//will be set later receiverID[a].serviceId =serviceId; receiverID[a].device = NULL;//will be set later if device was known receiverID[a].vpid = channel->Vpid(); //dsyslog("new PTSReceiver was created for VPID=%d",channel->Vpid()); // If a receiver with the same originalNetworkId and transportStreamId // were found, the device of this receiver is tuned to the same originalNetworkId, transportStreamId // the new receiver need, so I can attach the new receiver to the same device for(int i=0;i < MAXRECEIVER;i++){ if ((receiverID[i].originalNetworkId == originalNetworkId) && (receiverID[i].transportStreamId == transportStreamId)){ //there is already a receiver on the same transponder //dsyslog("There is already a receiver on the same transponder IDS: %d, %d, added ",originalNetworkId, transportStreamId); if (!receiverID[i].device->AttachReceiver(receiver)){ esyslog("ERROR could not attach receiver to same transponder. reason unknown"); delete receiver; receiverID[a].receiver = NULL; receiverID[a].originalNetworkId = 0; receiverID[a].transportStreamId = 0; receiverID[a].serviceId = 0; receiverID[a].device = NULL; receiverID[a].vpid = 0; return false;//could not attach receiver, reason unknown } receiverID[a].device = receiverID[i].device; receiverID[a].originalNetworkId =originalNetworkId; receiverID[a].transportStreamId =transportStreamId; dsyslog("added to device[%d]",receiverID[a].device->DeviceNumber()); return true;//new receiver was added to same device } } //not I need to test all other devices to receive the data cDevice *device; //check the last device first, because it is static tuned on a transponder and will not change device = cDevice::GetDevice(cDevice::NumDevices()-2);//TODO in case of xine the last one is the xine device so use -2 else -1 if(device->ProvidesChannel(channel,PRIORECEIVER)){ //dsyslog(" static device can receive PTSStream"); device->SwitchChannel(channel,false); if (!device->AttachReceiver(receiver)){ esyslog("ERROR could not attach receiver to static device."); }else{ receiverID[a].device = device; receiverID[a].originalNetworkId =originalNetworkId; receiverID[a].transportStreamId =transportStreamId; dsyslog("added to device[%d]",receiverID[a].device->DeviceNumber()); return true;//successful added } } else { //dsyslog(" static device can't receive PTSStream"); } //check all other devices if the receiver can be added for (int i= cDevice::NumDevices()-2; i>=0 ;i--){ device = cDevice::GetDevice(i); if(device->ProvidesChannel(channel,PRIORECEIVER)){ //dsyslog(" device[%d] can receive PTSStream",i); device->SwitchChannel(channel,false); if (!device->AttachReceiver(receiver)){ esyslog("ERROR could not attach receiver to device[%d].",i); }else{ // dsyslog("successful added receiver to device[%d]",i); receiverID[a].originalNetworkId =originalNetworkId; receiverID[a].transportStreamId =transportStreamId; receiverID[a].device = device; dsyslog("added to device[%d]",receiverID[a].device->DeviceNumber()); return true;//successful added } } else{ // dsyslog(" device[%d] can't receive PTSStream",i); } } //no device can handel the originalNetworkId, transportStreamId and serviceId // so clean up and exit with false // dsyslog("no device found for VPID=%d",receiverID[a].vpid); delete receiver; receiverID[a].receiver = NULL; //not needed but make it clean receiverID[a].originalNetworkId =0; receiverID[a].transportStreamId =0; receiverID[a].serviceId =0; receiverID[a].receiver = NULL; receiverID[a].vpid = 0; return false; }

3 9

API extension?: bool cMenuEditStrItem::InEditMode()
by Christian Wieninger 03 Jan '06

03 Jan '06

Hi, is there a chance to get a new member function like bool cMenuEditStrItem::InEditMode() { return pos > -1; } that returns the edit state on an item? I need this to set different color buttons for an edit item depending on its edit state. My current solution compares item text and value and is quite ugly ;-) : bool InEditMode(const char* ItemText, const char* ItemName, const char* ItemValue) { bool bEditMode = true; // ugly solution to detect, if in edit mode char* value = strdup(ItemText); strreplace(value, ItemName, ""); strreplace(value, ":\t", ""); // for bigpatch strreplace(value, "\t", ""); if (strlen(value) == strlen(ItemValue)) bEditMode = false; free(value); return bEditMode; } BR, Christian

2 1

Recording whole mux and ripping it ...
by juha s. 03 Jan '06

03 Jan '06

Hi gurus I would like to record multiple PIDs (2 x each: video, sound, subtitles and super text) from one MPEG2-TS stream and now I'm wondering how to do that. The stream include 5 channels information about 22 Mbps and I doun't want to record all of that because I only need 2 channels information. So is't possible to rip "on-the-fly" requested PIDs and make that kind of MPEG2-TS format. Or is't possible to record whole mux and after record stops, then rip out the PIDs I like to save for futher use. Thanks any help -Jussi

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr