vdr

vdr@linuxtv.org

2 participants
6731 discussions

Mplayer/mp3 playlists - how to??
by Simon Baxter 24 Aug '05

24 Aug '05

Hi. I've been looking everywhere for this, but can't find it. How do you create mp3 playlists in the mplayer/mp3 plugin??? thanks Simon

3 4

Avoiding the tuner on a broken FF card
by Gavin Hamill 24 Aug '05

24 Aug '05

Hi :) I have a FF DVB-C and a budget DVB-C, (they're both ves1820 devices) and the tuner on the FF card is v unreliable - I would like to avoid using it entirely. Is there a magic one-line hack for VDR to bypass the device-selection logic and always use a specific device, and hence always force transfer mode from the budget card to the MPEG decoder on the FF card? Cheers, Gavin.

4 5

[ANNOUNCE] vdr-xine-0.7.5 plugin
by Reinhard Nissl 23 Aug '05

23 Aug '05

Hi, I'm pleased to announce maintenance release 0.7.5: http://home.vr-web.de/~rnissl/vdr-xine-0.7.5.tgz Due to the changes in xine's CVS I've released this version earlier than I had planned. As a result, the known issue concerning the delay in playback when switching to trick speed mode is still not solved, but maybe it has improved a little bit. 2005-08-14: Version 0.7.5 - Added documentation about gxine's VDR support to MANUAL (thanks to Darren Salt for supplying the patch). - Fixed xine-plugin to update audio stream bitrate and decoder. - Removed singleton enforcement of xine-plugin as it caused problems with xine's post plugin management (suggested by Darren Salt). - Added support to select left / right audio channel by audio post plugin 'vdr_audio'. - Added audio post plugin support to xine-ui and fbxine which was needed for the new audio post plugin vdr_audio. - Renamed video post plugin 'vdr' to 'vdr_video' to match naming scheme, but it also registered as 'vdr' to maintain compatibility. - Created audio post plugin 'upmix_mono' to turn a mono stream into a stereo one with identical data on both sides (requested by Lucian Muresan). - Fixed some endianness problems in OSD code (thanks to Carsten Rietzschel for reporting this issue). - Fixed some compiler warnings with gcc-4.0.1 and gcc-4.1 (thanks to Eric OUEDRAOGO for reporting this issue). - Updated plugin to match interface changes in VDR-1.3.27 (thanks to C.Y.M for reporting this issue). - Fixed implementation of cDevice::Clear() which didn't ensure that really all data (i. e. the data which is just in the FIFO or socket) get's cleared. This might improve switching to trickspeed mode. - Updated MANUAL about using vdr_audio post plugin. For this release I suggest the following xine sources: http://home.vr-web.de/~rnissl/xine-lib-cvs-20050814180000.tar.bz2 http://home.vr-web.de/~rnissl/xine-ui-cvs-20050814180000.tar.bz2 Highly recommended is the following patch: http://home.vr-web.de/~rnissl/vdr-1.3.28-dvbplayer.patch http://home.vr-web.de/~rnissl/vdr-1.2.6-dvbplayer3.patch Enjoy. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

3 2

Re: [vdr] ttxtsub problem with vdr >= 1.3.28
by Rolf Ahrenberg 23 Aug '05

23 Aug '05

On Tue, 23 Aug 2005 02:18:09 +0200 Thomas Günther <tom1(a)toms-cafe.de> wrote: > ttxtsubs is working without any problems here. I tried yesterday with > VDR-1.3.29 and VDR-1.3.30. Well, nice to hear that it works for someone. However, Frank K. sent me info about possible cause and users suffering from the problem are adviced to apply the attached patch with reverse (-R). It removes the added ability to open directly audio selection menu and volumebar when subtitling is active, but I cannot see why this would help :) Anyway, if this really cures your system, please, don't keep it secret. BR, -- rofa

3 5

rcu and vdr 1.3
by Eric Laly 23 Aug '05

23 Aug '05

Hello all, I ave a fully fonctionnal vdr-1.2.6 with dvb-kernel for kernel-2.4 and a RCU unit. I've some spare time, so I've decided to give vdr-1.3 a try. First, I'm installing kernel 2.6.12.5 instaed of 2.4.27: vdr-1.2.6 is always functionnal with 2.6. Second I'm installing a vanilla vdr-1.3.30 with an other /video (only the .conf of VDR into and the remote.conf of vdr-1.2.6) , and this is the problem with RCU: no "HELO" and no remote. the log: Aug 23 00:20:59 vdr vdr[13069]: VDR version 1.3.30 started Aug 23 00:20:59 vdr vdr[13069]: loading /video/sources.conf Aug 23 00:20:59 vdr vdr[13069]: loading /video/diseqc.conf Aug 23 00:20:59 vdr vdr[13069]: loading /video/channels.conf Aug 23 00:20:59 vdr vdr[13069]: loading /video/svdrphosts.conf Aug 23 00:20:59 vdr vdr[13069]: loading /video/ca.conf Aug 23 00:20:59 vdr vdr[13069]: loading /video/remote.conf Aug 23 00:20:59 vdr vdr[13069]: loading /video/keymacros.conf Aug 23 00:21:01 vdr vdr[13069]: found 2 video devices Aug 23 00:21:01 vdr vdr[13069]: setting primary device to 1 Aug 23 00:21:01 vdr vdr[13069]: SVDRP listening on port 2001 Aug 23 00:21:01 vdr vdr[13069]: loading /video/themes/sttng-default.theme Aug 23 00:21:01 vdr vdr[13069]: loading /video/themes/sttng-default.theme Aug 23 00:21:01 vdr vdr[13069]: connecting to RCU remote control using code C Aug 23 00:21:01 vdr vdr[13069]: switching to channel 1 If I stop vdr-1.3.30 and I start vdr-1.2.6 (with its /video): all is working. (and if I make a 'cat /dev/ttyS1', I can see the code from the remote when I'm pressing a key) so the problem is not from the RCU, the COM port or the driver of the port com. With vdr-1.3.30, if I suppress the remote.conf to make a new remote learning, there is no 'COdE' on the four digits display and the RCU doesn't recognize the remote (I've made the test with vdr-1.2.6 and this is working). the log: Aug 23 00:08:15 vdr vdr[11084]: VDR version 1.3.30 started Aug 23 00:08:15 vdr vdr[11084]: loading /video/sources.conf Aug 23 00:08:15 vdr vdr[11084]: loading /video/diseqc.conf Aug 23 00:08:15 vdr vdr[11084]: loading /video/channels.conf Aug 23 00:08:15 vdr vdr[11084]: loading /video/svdrphosts.conf Aug 23 00:08:15 vdr vdr[11084]: loading /video/ca.conf Aug 23 00:08:15 vdr vdr[11084]: loading /video/keymacros.conf Aug 23 00:08:17 vdr vdr[11084]: found 2 video devices Aug 23 00:08:17 vdr vdr[11084]: setting primary device to 1 Aug 23 00:08:17 vdr vdr[11084]: SVDRP listening on port 2001 Aug 23 00:08:17 vdr vdr[11084]: loading /video/themes/sttng-default.theme Aug 23 00:08:17 vdr vdr[11084]: loading /video/themes/sttng-default.theme Aug 23 00:08:17 vdr vdr[11084]: trying codes for RCU remote control... My config: Debian stable/testing gcc-3.3.5 kernel 2.6.12.5 If someone can help... Thank in advance. Eric.

2 2

vdr-xine, no ac3 playback?
by mike lewis 23 Aug '05

23 Aug '05

I recently purchased a reciever capable of ac3/dts decoding. I've been doing some testing and I now have the correct config in xine to dump ac3 streams directly through my sound card to my reciever. With watching dvd's in xine, I get an ac3 stream, however, when using vdr-xine (0.7.4) I only get PCM stereo. VDR EPG info shows the audio as being DD. I guess I'm trying to establish whether or not vdr-xine is altering the audio stream or vdr is altering the audio or my provider is lying by telling vdr that isa DD stream but its not?? Any pointers? Mick.

4 4

xine-0.7.5: the network patch
by Peter Weber 23 Aug '05

23 Aug '05

Hi, 1) you must patch the xine-lib with original patch from Reinhard, then use the network patch (file to patch is: xine-lib/src/vdr/input_vdr.c): http://mitglied.lycos.de/peterweber69/xine/xine-lib-with-sockets.patch 2) patch for xine-plugin file to patch is xine-lib.c and xineLib.h http://mitglied.lycos.de/peterweber69/xine/vdr-xine-0.7.2-using-tcp-sockets… xineLib.h there are hunks, but have a look at the xine-lib.h.rej file and make the changes in xine-lib.c with an editor bye Horst -- 5 GB Mailbox, 50 FreeSMS http://www.gmx.net/de/go/promail +++ GMX - die erste Adresse f�r Mail, Message, More +++

1 1

AW: Re: [vdr] [ANNOUNCE] xine-0.7.5 plugin via network
by Peter Weber 23 Aug '05

23 Aug '05

Hi, for the changes have a look to original xine: http://www.vdr-portal.de/board/thread.php?threadid=37650&sid= bye Peter > Von: Ilariu Raducan <ilariu(a)gmail.com> > An: Klaus Schmidinger's VDR <vdr(a)linuxtv.org> > Betreff: Re: [vdr] [ANNOUNCE] xine-0.7.5 plugin via network > Datum: Tue, 16 Aug 2005 21:14:09 +0100 > Can you explain what are the changes? > Is there a web page with changelogs, bugs, ...? > > Thank you, > Ilariu > > On 8/16/05, Peter Weber <peter_weber69(a)gmx.at> wrote: > > xine-plugin on Server, only xine-player on client > > > > Files on my Homepage: > > <a href=http://mitglied.lycos.de/peterweber69/xine/xine.htm>http://mitglied.lycos.de/peterweber69/xine/xine.htm</a>> > > -- > > GMX DSL = Maximale Leistung zum minimalen Preis! > > 2000 MB nur 2,99, Flatrate ab 4,99 Euro/Monat: <a href=http://www.gmx.net/de/go/dsl>http://www.gmx.net/de/go/dsl</a>> > > _______________________________________________ > > vdr mailing list > > vdr(a)linuxtv.org > > <a href=http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr</a>> > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > <a href=http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr>http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr</a> Nutzen Sie Outlook für Lycos Mail! - http://mail.lycos.de/app/lycosinside/setupLI.exe

1 0

ttxtsub problem with vdr >= 1.3.28
by Kimmo Taskinen 23 Aug '05

23 Aug '05

Hi, I've been using subtitles and ttxtsub plugins together with pathces from http://users.tkk.fi/~rahrenbe/vdr/. For example for version 1.3.30 I am using: vdr-1.3.30-subtitles-0.3.8-and-ttxtsubs-0.0.5.diff.gz and vdr-1.3.30-enAIO-2.5.diff.gz The new problem is that when I'm watching a recorded show (that doesn't have subtitles; recorded from finnish MTV3), the ttxtsub plugins starts showing subtitles from some channel that was not even selected before starting the record playing. This problem emerged with vdr-1.3.28 and it's still there with 1.3.30. 1.3.27 does not have it and I have stayed on that for now. Does anyone else have this problem? Cheers, Kimmo

4 5

VDR-1.3.30: testing new cAudioRepacker
by Reinhard Nissl 22 Aug '05

22 Aug '05

Hi, I'd like you to test the new cAudioRepacker which is contained in the attached patch. The patch also fixes some locations where VDR didn't handle MPEG1 streams properly. An additional patch for vdr-xine-0.7.5 will follow the next day(s), which fixes some MPEG1 issues in vdr-xine. Planned to be attached to this email, I've just trashed my corrections while preparing the diff :-(( I'd better gone to bed earlier ;-) Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr