vdr

vdr@linuxtv.org

2 participants
6731 discussions

Re: [vdr] [PATCH] EPG data growing without bounds
by Ville Skyttä 04 Aug '05

04 Aug '05

On Sat, 2005-07-30 at 16:48 +0200, Klaus Schmidinger wrote: > Since the code in VDR/eit.c always sets a completely new (and thus consistent) > set of components, the only way this can happen is through SVDRP's PUTE command > (or while reading epg.data). In order to fix this I believe this should suffice: This patch + manual removal of epg.data seems to have cured the descriptions-are-off-by-one problems I mentioned earlier in this thread. Thanks!

1 0

Recordings by genre?
by Uwe Ortner 04 Aug '05

04 Aug '05

hello list, it would be very nice if i could assign a "genre" to my recordings i.e. thriller, drama, krimi etc. the record should be made in a subdirectory with the same name Does it make sense to implement such a feature in one of the next releases? uwe PS: i know that i can make subdirectories by hand (~), but this way it would be much easier :)

3 2

HOWTO: VDR on Slackware
by edafe 04 Aug '05

04 Aug '05

This page describes how to build a digital video recorder for Freeview: http://www.edafe.org/vdr/ Regards, Edafe

1 0

MP3/MPlayer plugin 0.9.13 available
by s.huelswitt＠gmx.de 03 Aug '05

03 Aug '05

Hi, a new version of the MP3/MPlayer plugin is available from my homepage. <http://www.muempf.de/down/vdr-mp3-0.9.13.tar.gz> NEWS: 31.07.2005: Version 0.9.13 development (vdr 1.2.6/1.3.24) - Moved OSD position selection to plugin setup menu (as before this works for non-skined vdr <1.3.7 only). - Removed DVD navigation from MPlayer slavemode. - Added support for configurable keys (0-9) in MPlayer slavemode. The slave command can be entered in the plugin setup menu and is sent to MPlayer during playback if the key is pressed. - Added support to display a summary file (plain ascii) in the MPlayer browser. If you are on a video file, press '0' to display the summary. The summary file has to be named like the video file but with ".summary" appended (e.g. video.mpeg -> video.mpeg.summary). - New MP3 plugin setup option to keep the selection menu opened after selection. Suggested by Mikko Mäkinen. - Fixed ringbuffer timeouts in network code. - Fixed ID3 V2 tag handling. Unusual big tags caused the ID3 scanner to mark the file as bad. Now correctly skipping ID3 tags during playback too. Reported by Olaf Henkel. - Prevent writing to a broken pipe in mplayer slave control. Reported by Gerhard Steiner. - Fixed passing AID 0 to mplayer.sh. To allow MPlayer autoselect the audio stream, set AID to -1 (this can only be achieved by entering 0 and than pressing left). - Improved creation of LPCM frames. Based on the changes in muggle 0.1.8. - Updated french translations. Provided by Jerome Rousset. -- Stefan Huelswitt s.huelswitt(a)gmx.de | http://www.muempf.de/

4 8

RE: [vdr] [ANNOUNCE] vdr-iaxphone-0.0.2 - a softphone for vdr
by Erik Beauvalot 03 Aug '05

03 Aug '05

Hi, cOsdItem *statusline[6]; This modification works fine: I can see the volume ligne now. Now I will look more in detail the IAX protocol and library Thanks !! Erik.

1 0

Re: [vdr] Re: reading epg.data kills vdr-1.3.27
by Wolfgang Rohdewald 03 Aug '05

03 Aug '05

On Dienstag 02 August 2005 09:44, Harald Milz wrote: > Klaus is correct - we'd rather find the reason for it. I have no idea where > to look, though. If someone could tell me what to look for... did you already try to send your channels.conf and epg.data to somebody else to see if it coredumps there too? If not, you could mail them to me and I would try that and debug if necessary. At least I could produce a backtrace. -- Wolfgang

2 2

Airstar2, device 3 has no lock
by voitto.tuomainen＠nokia.com 03 Aug '05

03 Aug '05

Hi, I have following system: - two Technisat Airstar2 PCI card (budget cards) - one Technisat Skystar2 (budget card) - Sapphire Radeon 9600 XT - Sempron 2800+ - ASUS motherboard - gentoo (updated to half a week old snapshot) - kernel 2.6.12-gentoo-r6 - udev 064 - vdr 1.3.27 -- softdevice cvs (31.7.) I feed input of the second card from output of the first, to which input I feed the terrestial antenna signal. If I feed output of the second card to TV, I get proper picture as long as the computer is on. My problem is that while I record one program, and change channel to another, which is not in the same channel transponder (?/multiplexer) as the one is recorded, I get the error: device 3 has no lock, can't attach receiver. I've increased TUNER_LOCK_TIMEOUT value of device.c in vdr directory (one note that I found from google search maybe from archived email of this mailinglist), but that does not change anything else, than that I got the error message after the time defined in that file. If I run two channels from different transponder with tzap at the same time, there is no errors. I've experienced this with all vdr, softdevice and kernel 2.6.11/12 combinations, which I have had during half a year. Yesterday I even tried patched drivers accoording to recommendation, which I found from this mailinglist (Air/SkyStar2 IRQ stop (partial) fix; Wed Jun 22 21:17:09). The problem exist still. /var/log/messages: Aug 1 22:15:47 miuvdr vdr[8211]: record /video/@Mexican_(K15)/2005-08-01.22:15.50.99.rec Aug 1 22:15:47 miuvdr vdr[8211]: creating directory /video/@Mexican_(K15) Aug 1 22:15:47 miuvdr vdr[8211]: creating directory /video/@Mexican_(K15)/2005-08-01.22:15.50.99.rec Aug 1 22:15:47 miuvdr vdr[8211]: recording to '/video/@Mexican_(K15)/2005-08-01.22:15.50.99.rec/001.vdr' Aug 1 22:15:47 miuvdr vdr[8259]: file writer thread started (pid=8259, tid=589843) Aug 1 22:15:47 miuvdr vdr[8260]: recording thread started (pid=8260, tid=606228) Aug 1 22:15:51 miuvdr vdr[8257]: [VideoOut]: 720x576 [0,0 720x576] -> 1024x768 [0,9 1024x750] Aug 1 22:15:51 miuvdr vdr[8257]: [VideoOut]: 720x576 [0,0 720x576] -> 768x576 [0,7 768x562] Aug 1 22:15:53 miuvdr vdr[8211]: timer 1 (3 2215-0115 '@Mexican (K15)') set to event Ma 01.08.2005 23:30-00:10 'Pisnesmies Toni' Aug 1 22:15:56 miuvdr vdr[8211]: switching to channel 1 Aug 1 22:15:56 miuvdr vdr[8253]: transfer thread ended (pid=8253, tid=491531) Aug 1 22:15:56 miuvdr vdr[8211]: buffer stats: 66176 (3%) used Aug 1 22:15:56 miuvdr vdr[8211]: buffer stats: 0 (0%) used Aug 1 22:16:01 miuvdr vdr[8211]: ERROR: device 3 has no lock, can't attach receiver! Aug 1 22:16:01 miuvdr vdr[8211]: buffer stats: 0 (0%) used Aug 1 22:16:06 miuvdr vdr[8211]: ERROR: device 3 has no lock, can't attach receiver! ______ BR, Voitto Tuomainen

3 2

mplayer audio yes but black screen
by Leo Márquez 03 Aug '05

03 Aug '05

Hi!, I think I'm aproaching to run divx movies with VDR and mplayer. Now the movie plays without any errors, I listen the movie audio but black screen. I have mplayer built from source code. I have readed that mplayer plugins not plays videos if the primary dvb is number 2 but I supose this information is obsolete because with mplayer.sh I can say what device has to output. I do this with -vo mpegpes:card=2 in mplayer.sh. Have I to modify the vdr-mp3/mplayer plugin source code to solve this problem? If not, why don't see the video? In the console of VDR I see this: Opening /dev/dvb/adapter1/video0+audio0 Opening video filter: [lavc=2:25] Opening video filter: [expand w=-1 h=576 x=-1 y=-1 osd=1] Expand: -1 x 576, -1 ; -1 (-1=autodetect) osd: 1 Opening video filter: [scale w=-1 h=0] Opening video filter: [dvbscale] ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4) ========================================================================== Checking audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le... AF_pre: 44100Hz/2ch/s16le AO: [mpegpes] 44100Hz 2ch s16le (2 bps) Building audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le... Starting playback... VDec: vo config request - 576 x 240 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 2.40:1 - prescaling to correct movie aspect. SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: BICUBIC scaler, from Planar YV12 to Planar YV12 using MMX2 [mpeg1video @ 0x85c4760]removing common factors from framerate VO: [mpegpes] 576x576 => 576x576 Mpeg PES A: 45.0 V: 45.0 A-V: 0.005 ct: -0.045 1127/1127 10% 47% 2.6% 0 0 I think all is correct!!!!!! Any ideas?? Thanks again Leo

1 1

Re: [vdr] Airstar2, device 3 has no lock
by Voitto Tuomainen 02 Aug '05

02 Aug '05

Hi, I installed the splitter, and it worked for me too - great! Previously, when I used skystar module, which came along with gentoo kernel, I tried that splitter, but it did not work. These new CVS drivers seem to work. _______ BR, Voitto Andreas Mueller kirjoitti 02.08.2005 kello 11:21: > voitto.tuomainen(a)nokia.com wrote: > > Hi, > > I have following system: > > - two Technisat Airstar2 PCI card (budget cards) > > - one Technisat Skystar2 (budget card) > > - Sapphire Radeon 9600 XT > > - Sempron 2800+ > > - ASUS motherboard > > - gentoo (updated to half a week old snapshot) > > - kernel 2.6.12-gentoo-r6 > > - udev 064 > > - vdr 1.3.27 > > -- softdevice cvs (31.7.) > > > > I feed input of the second card from output of the first, to which > > input I feed the terrestial antenna signal. If I feed output of the > > second card to TV, I get proper picture as long as the computer is > > on. > > > > My problem is that while I record one program, and change channel to > > another, which is not in the same channel transponder (?/multiplexer) > > as the one is recorded, I get the error: device 3 has no lock, can't > > attach receiver. > > I've had a similar problem with two AirStar2 PCI cards, the output of > the first card was connected to the input of the second card. However, > the card's output seems to have a problem with the 5 Volts remote power > supply (for active antennas) coming from the other card's input. I > suspected a hardware defect, but the two cards were working when I > feeded them separately. I've bought a splitter and connected the two > cards in parallel - everything is working fine now! > > Andreas. > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ______ BR, Voitto ................................................................... Luukku Plus paketilla pääset eroon tila- ja turvallisuusongelmista. Hanki Luukku Plus ja helpotat elämääsi. http://www.mtv3.fi/luukku

1 0

RE: [vdr] [ANNOUNCE] vdr-iaxphone-0.0.2 - a softphone for vdr
by Erik Beauvalot 02 Aug '05

02 Aug '05

Hi, First of all : Thank you for your job it is exactly what I needed (I install an asterisk PBX 2 days before you sendout the first version of your plugins) I just wanted to report some issue that I have : - With this version (0.0.2) I have vdr restarting when I lunch the OSD, after a small debug I found out where there is a problem, but I don't understand why there is a problem ... It is in iaxphone.c line 562. If I comment this line it works. I look on the version 0.0.1 to see if there is any difference ... didn't find anything. So I don't have the volume ligne display. - With the 2 version, I steel have registration failed : but I can phone my vdrbox and phone from my vdrbox. I try plaintext and the md5 in the asterisk/iax.conf file, but it doesn't change anything. Regards, 2005/7/31, Luca Olivetti <luca(a)ventoso.org>: > > > > -- ------------------------ Erik /\/\/\/\/\/\/\/ ------------------------

2 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr