vdr

vdr@linuxtv.org

2 participants
6731 discussions

Re: [vdr] Segmentation fault with image plugin
by Guy Roussin 26 Jun '05

26 Jun '05

Thank you very much Andreas ! I recompile ffmpeg and plugins as you say and now all is fine. Guy Roussin ___________________________________ NOCC, http://www.teledetection.fr

1 0

Software suspend (was Re: [vdr] boot times)
by Laz 26 Jun '05

26 Jun '05

On Friday 24 June 2005 23:24, Patrick Boettcher wrote: > Hi, > > I think this mail is off-thread, but I lost track on the way. Sorry for > that. > > Anyway: Within this thread a solution based on software-suspend2 was > mentioned. I tried it and I'm quite surprised: it works! > > I'm using 2.6.12 with dvb-kernel CVS + the patchset from suspend2.net + > hibernate from debian. Some usb-driver-quirks were necessary and now my > system is up and running within 20 seconds, which is quite enough for me > (as fast as the old dbox1, afair). > > I'm using vdr with softdevice via a Matrox G550 and 2 budget devices. > > Thanks for mentioning suspend2, thanks for the good work on VDR and > especially the soft-device-plugin. What are the usb-driver-quirks that you mention? Are they usb DVB devices that you have? I've just been having another go at getting software suspend to work on an Epia-based vdr system with vdr-xine. I can get it to suspend and resume fairly easily with a 2.6.12 kernel and the latest patch set form www.suspend2.net but I can't get the DVB drivers to play nicely! A suspend and restart brings it back up as it should and vdr starts but all I see is a black screen. I can change channel but I still get a black screen. I have yet to see if the DVB card (an old l64781 based Nova-T) is outputting a stream or not, and LIRC won't allow any connections after resuming (homebrew receiver). I have yet to try playing back a recording because it's a bit awkward without a remote! Has anyone had any luck with software suspend and this type of card or LIRC? Do I need to explicitly kill vdr and unload the drivers before suspending, and then reload and restart on startup? Cheers, Laz

3 3

Re: [vdr] Segmentation fault with image plugin
by Guy Roussin 26 Jun '05

26 Jun '05

Hi, Thanks Andreas, Here is the backtrace i get after the coredump : /dvb/vdr-1.3.27$ gdb vdr core.5516 GNU gdb 6.3-debian Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-linux"...Using host libthread_db library "/lib/tls/libthread_db.so.1". Core was generated by `./vdr -c /etc/vdr3 -Pimage -C /etc/vdr3/plugins/imageplugin.sh'. Program terminated with signal 11, Segmentation fault. warning: current_sos: Can't read pathname for load map: Erreur d'entrée/sortie Reading symbols from /usr/lib/libjpeg.so.62...done. Loaded symbols for /usr/lib/libjpeg.so.62 Reading symbols from /lib/tls/libpthread.so.0...done. Loaded symbols for /lib/tls/libpthread.so.0 Reading symbols from /lib/tls/libdl.so.2...done. Loaded symbols for /lib/tls/libdl.so.2 Reading symbols from /usr/lib/libstdc++.so.5...done. Loaded symbols for /usr/lib/libstdc++.so.5 Reading symbols from /lib/tls/libm.so.6...done. Loaded symbols for /lib/tls/libm.so.6 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 Reading symbols from /lib/tls/libc.so.6...done. Loaded symbols for /lib/tls/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /perso/dvb/vdr-1.3.27/PLUGINS/lib/libvdr-image.so.1.3.27...done. Loaded symbols for ./PLUGINS/lib/libvdr-image.so.1.3.27 Reading symbols from /usr/lib/libavcodec.so...done. Loaded symbols for /usr/lib/libavcodec.so Reading symbols from /usr/lib/libz.so.1...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /usr/lib/libfaad.so.0...done. Loaded symbols for /usr/lib/libfaad.so.0 Reading symbols from /usr/local/lib/libmp3lame.so.0...done. Loaded symbols for /usr/local/lib/libmp3lame.so.0 Reading symbols from /usr/lib/libvorbis.so.0...done. Loaded symbols for /usr/lib/libvorbis.so.0 Reading symbols from /usr/lib/libvorbisenc.so.2...done. Loaded symbols for /usr/lib/libvorbisenc.so.2 Reading symbols from /usr/lib/libogg.so.0...done. Loaded symbols for /usr/lib/libogg.so.0 #0 0xb6b0f2f7 in MPV_common_init_mmx () from /usr/lib/libavcodec.so (gdb) bt #0 0xb6b0f2f7 in MPV_common_init_mmx () from /usr/lib/libavcodec.so #1 0xb69b0fd5 in ff_h263_round_chroma () from /usr/lib/libavcodec.so #2 0xb69ac3b9 in ff_copy_bits () from /usr/lib/libavcodec.so #3 0xb69a8f77 in MPV_encode_picture () from /usr/lib/libavcodec.so #4 0xb69a5058 in avcodec_encode_video () from /usr/lib/libavcodec.so #5 0xb7be1b41 in cEncode::Encode (this=0x9195dcc) at encode.c:280 #6 0xb7be24b9 in cStillImage::Action (this=0x9195da0) at stillimage.c:89 #7 0x08116ad6 in cThread::StartThread (Thread=0x9195da0) at thread.c:233 #8 0xb7faeb63 in start_thread () from /lib/tls/libpthread.so.0 #9 0xb7e6318a in clone () from /lib/tls/libc.so.6 Guy Roussin ___________________________________ NOCC, http://www.teledetection.fr

2 1

Re: [vdr] dvd plugin
by peter.dittmann＠freenet.de 25 Jun '05

25 Jun '05

> I've just installed this and the control for dvd navigation is great. > > 2 problems though. > > 1) I get no sound! ?? let's guess, you have DolbyDigital enabled ? Then this is how it momentarily behaves. You may try some of newer firmwares 261d/261e. > 2) I was testing FF and REW and it locked up VDR and the DVB driver - had to > > reboot. You mean reboot vdr or the whole computer ? Have you tried to get access on the konsole ? > any ideas? . . . may be with more data ;-)

2 2

How to debug a vdr segfault?
by Hanno Mueller 25 Jun '05

25 Jun '05

Hi, I used to run a vdr 1.2.6 based on Debian with Kernel 2.6.11.12 and a full-featured DVB-C card. That combination worked very stable and I had no complaints at all. Recently I added a Nova-T (new Conexant-based revision) DVB-T and upgraded to 2.6.12 which contains the new drivers to support it. Since then, my vdr segfaults every few minutes http://www.linuxtv.org/pipermail/linux-dvb/2005-June/002905.html The friendly folks at the DVB mailing list seen to think that it's not the card, another user reports it is stable for him http://www.linuxtv.org/pipermail/linux-dvb/2005-June/002903.html I tried as suggested to use vdr without runvdr http://www.linuxtv.org/pipermail/linux-dvb/2005-June/002908.html and it showed me the segfaults. I also tried to run it without the plugins, same problem. The card itself seems to work. I used the vanilla 2.6.12 kernel and the card was recognized. Before vdr crashes, I can switch channels, watch TV and it receives EPG data from the DVB-T channel, as well. How can I debug this problem? Is it the card, the kernel, the vdr version, the tv channel it tuned to? Thanks, Hanno

4 8

MotoGP Assen
by tony 25 Jun '05

25 Jun '05

Hi I have messed up my VDR (installing FC4 and stupid mistake rm -rf VDR...) Is anyone going to record the MotoGP on BBC2 tomorrow? I miss this GP each year for one reason or another. If someone does record please contact me so that we can work something out. TIA Tony

1 0

Segmentation fault with image plugin
by Guy Roussin 25 Jun '05

25 Jun '05

Hi, I try to debug a segmentation fault with the image plugin. I use debian sid, vdr 1.3.27 (vanilla) and image plugin 0.2.3 i compile vdr and plugins with : make all plugins VFAT=1 REMOTE=LIRC i also try with make all plugins VFAT=1 REMOTE=LIRC FFMPEG_STATIC=1 and ffmpeg 0.4.8 But, when i want to play picture, i always get : /dvb/vdr-1.3.27$ ./vdr -c /etc/vdr3 -P'image -C /etc/vdr3/plugins/imageplugin.sh' imageplugin.sh: called 'imageplugin.sh /perso/photo/cdr03/025/PICT0001.JPG /tmp/image/VW9QPn4.pnm 688 544 0 0 0' imageplugin.sh: jpegtopnm: WRITING PPM FILE imageplugin.sh: Success! Stopped with created /tmp/image/VW9QPn4.pnm Erreur de segmentation There is some tips to debug this segmentation fault ? Thanks Guy Roussin ___________________________________ NOCC, http://www.teledetection.fr

3 2

Mouse and On-Screen Keyboard Support
by Chris Warren 25 Jun '05

25 Jun '05

Hi all, I'm working on a DIY digital pictureframe project and also trying to have it second as a VDR playback device. As it has a touchscreen, I'm wondering if anyone knows of any patches or plugins anyone has made in the past to support navigation through the menus using a mouse as this is what the touchscreen emulates. Also, has anyone ever tried writing a on-screen keyboard for text entry? I have a feeling the answer to both of these will be "no", but thought it best to check incase I was duplicating someone else's work. Many thanks, Chris

1 0

Request : CutterBandwithLimit.patch for vdr-1.2.x ?
by christian jacobsen 23 Jun '05

23 Jun '05

Hallo, I am loooking for the author of the CutterQueue and CutterBandwithLimit.patch Could you please create a version of the CutterBandwithLimit.patch for vdr-1.2.x ? Thanks in advance :) I would like to use the CutterBandwithLimit.patch with vdr-1.2.5 so that it would make vdrcutter2 go a bit easyer on the resources. Thus keep VDR reaction nicely while cutting in the background using my AutoCutter scripts. It brings the folowing error while compiling with vdr-1.2.5 : g++ -g -O2 -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_ -D_GNU_SOURCE -DVIDEODIR=\"/video\" -DPLUGINDIR=\"./PLUGINS/lib\" -I../DVB/include cutter.c cutter.c: In member function `virtual void cCuttingThread::Action()': cutter.c:88: error: `cTimeMs' undeclared (first use this function) cutter.c:88: error: (Each undeclared identifier is reported only once for each function it appears in.) cutter.c:88: error: syntax error before `__attribute__' cutter.c:200: error: `t' undeclared (first use this function) cutter.c:215: error: `cCondWait' undeclared (first use this function) cutter.c:215: error: syntax error before `::' token make: *** [cutter.o] Error 1 By the way the patch works very nice with vdr-1.3.27 and your CutterQueue. Cutted 6-7 recordings with that yesterday and no problems - VDR reacted very nice while cutting :) Thanks a lot. I am going into Holiday tomorrow so I will not be able to reply for a couple of weeks ;) Greetings Christian Jacobsen

1 0

Air/SkyStar2 IRQ stop (partial) fix
by Patrick Boettcher 23 Jun '05

23 Jun '05

Hi list, after some time of investigation the no-data problem of the flexcop-pci-driver (f.k.a skystar2-driver) is fixed (partially at least). Short problem description: after some time stressing the card with (re)tuning (e.g. as a slave card in VDR doing EPG/channels-scan) the card stops to producing interrupts and thus delivers not data anymore. I could only do tests with an old AirStar card which is not really reliable, because most of the affected cards are SkyStar2 DVB-S and I don't have easy access to DVB-S. I highly encourage everyone who suffered/ is suffering from this issue to either try current CVS of dvb-kernel (requires 2.6.12) or to checkout CVS from 2005-06-18 and apply this patch [1] (runs with 2.6.9/10/11). (cvs co -D 2005-06-18 dvb-kernel or cvs up -D 2005-06-18) Please report your results. Thank you and good luck ;). best regards, Patrick. [1] http://vaasa.wi-bw.tfh-wildau.de/~pboettch/home/files/fc-irq-check-01.patch -- Mail: patrick.boettcher(a)desy.de WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr