vdr

vdr@linuxtv.org

2 participants
6731 discussions

Help is wanted
by Rose M 24 May '05

24 May '05

Hello list! I'm trying to use vdr with a Nova-t card not depending on softdevice plugin, I want to use a full-featured nexus-s to do mpeg encoder work. If someone could tell me any idea to do it or there is someone using this two card without softdevice... please could you help me? Any related post would be useful. Thanks, hoping help! Rose ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

1 0

Radio in analogtv plugin
by Jose Alberto Reguero 24 May '05

24 May '05

I am triying to make analogtv plugin with a pvr-350 to work with analog radio. I must set CBR for the radio work properly. When I play a radio recording program the time that appear in vdr is 1/4 of the real time. Any ideas? Thanks. Jose Alberto

1 1

Can't load the firmware on my Hauppauge Nova-T cards under Gentoo 2005
by anthony hornby 24 May '05

24 May '05

Anyone seen these errors? Apologies for cross-posting - I'll post this on the Gentoo lists as well. I can't load the firmware on my Hauppauge Nova-T cards under Gentoo 2005, using Gentoo-De ebuilds. This is weird as I have used these cards successfully under Fedora core 3 with no problems. The firmware errors occur with either the firmware that comes with the linuxtv-dvb drivers, the extract of the latest ones using get_dvb_firmware script or using a manual conversion of ttlcdacc.dll from the driver disk supplied with the cards. The logs seem to indicate it is finding the firmware just can't use it. Also weird is this that all the required modules seem to load OK ?? Have suplied /var/log/messages, lspci, lsmod, dmesg and the output of running vdr manually from the command line. When running it manually it loads the OSD fine and you can change settings and navigate with no problems. Once it even loaded the firmware and tuned to the strongest channel - though just the once. Perhaps this is a timeout issue?? Any ideas? VDR Errors when starting using Gentoo supplied script ***************************************************** May 23 20:21:09 mmc vdr[7427]: VDR version 1.3.24 started May 23 20:21:09 mmc vdr[7427]: loading plugin: /usr/lib/vdr/libvdr- remote.so.1.3.24 May 23 20:21:09 mmc vdr[7427]: loading plugin: /usr/lib/vdr/libvdr- femon.so.1.3.24 May 23 20:21:09 mmc vdr[7427]: loading plugin: /usr/lib/vdr/libvdr- softdevice.so.1.3.24 May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/setup.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/sources.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/diseqc.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/channels.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/timers.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/commands.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/svdrphosts.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/ca.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/remote.conf May 23 20:21:09 mmc vdr[7427]: loading /etc/vdr/keymacros.conf May 23 20:21:09 mmc vdr[7427]: reading EPG data from /video/epg.data May 23 20:21:09 mmc vdr[7427]: probing /dev/dvb/adapter0/frontend0 May 23 20:21:09 mmc tda1004x: found firmware revision 2c -- invalid May 23 20:21:09 mmc tda1004x: waiting for firmware upload (dvb-fe- tda10045.fw)... May 23 20:21:11 mmc tda1004x: firmware upload complete May 23 20:21:11 mmc tda1004x: found firmware revision 2c -- invalid May 23 20:21:11 mmc tda1004x: firmware upload failed May 23 20:21:11 mmc vdr[7427]: probing /dev/dvb/adapter1/frontend0 May 23 20:21:11 mmc vdr[7461]: tuner on device 1 thread started (pid=7461, tid=16386) May 23 20:21:11 mmc vdr[7462]: Section handler thread started (pid=7462, tid=32771) May 23 20:21:11 mmc tda1004x: found firmware revision 2c -- invalid May 23 20:21:11 mmc tda1004x: waiting for firmware upload (dvb-fe- tda10045.fw)... May 23 20:21:13 mmc tda1004x: firmware upload complete May 23 20:21:13 mmc tda1004x: found firmware revision 2c -- invalid May 23 20:21:13 mmc tda1004x: firmware upload failed May 23 20:21:13 mmc vdr[7427]: probing /dev/dvb/adapter2/frontend0 May 23 20:21:13 mmc vdr[7491]: tuner on device 2 thread started (pid=7491, tid=49156) May 23 20:21:13 mmc vdr[7492]: Section handler thread started (pid=7492, tid=65541) May 23 20:21:13 mmc vdr[7494]: tuner on device 3 thread started (pid=7494, tid=81926) May 23 20:21:13 mmc vdr[7427]: found 3 video devices May 23 20:21:13 mmc vdr[7427]: initializing plugin: remote (0.3.3): Remote control May 23 20:21:13 mmc vdr[7427]: initializing plugin: femon (0.8.1): DVB Signal Information Monitor (OSD) May 23 20:21:13 mmc vdr[7427]: initializing plugin: softdevice (0.1.0): A software emulated MPEG2 device May 23 20:21:13 mmc vdr[7495]: Section handler thread started (pid=7495, tid=98311) May 23 20:21:17 mmc rc-scripts: Failed to start vdr. LSMOD output ************ mmc root # lsmod Module Size Used by md5 3712 1 ipv6 238848 12 sg 30240 0 ohci_hcd 19144 0 analog 10080 0 ns558 4736 0 pcspkr 3236 0 matroxfb_base 27172 1 matroxfb_DAC1064 10688 1 matroxfb_base matroxfb_accel 4288 1 matroxfb_base matroxfb_Ti3026 5696 1 matroxfb_base matroxfb_g450 6336 1 matroxfb_base g450_pll 5440 2 matroxfb_DAC1064,matroxfb_g450 matroxfb_misc 11228 6 matroxfb_base,matroxfb_DAC1064,matroxfb_accel,matroxfb_Ti3026,matroxfb_g450,g450_pll snd_via82xx 23232 0 snd_ac97_codec 73912 1 snd_via82xx snd_pcm 82568 2 snd_via82xx,snd_ac97_codec snd_timer 21380 1 snd_pcm snd_page_alloc 7620 2 snd_via82xx,snd_pcm gameport 3584 3 analog,ns558,snd_via82xx snd_mpu401_uart 6208 1 snd_via82xx snd_rawmidi 20192 1 snd_mpu401_uart snd_seq_device 6988 1 snd_rawmidi i2c_viapro 6544 0 ehci_hcd 30792 0 hci_usb 13256 0 usbmouse 4608 0 usbhid 42688 0 uhci_hcd 29520 0 sata_via 5828 0 libata 41092 1 sata_via skge 33488 0 via_agp 7552 1 evdev 7424 0 budget_ci 13888 0 tda1004x 15364 1 budget_ci budget 9856 0 budget_core 9796 2 budget_ci,budget dvb_ttpci 100200 0 l64781 7812 2 budget,dvb_ttpci saa7146_vv 50560 1 dvb_ttpci video_buf 17412 1 saa7146_vv saa7146 18632 5 budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv ves1820 6148 2 budget,dvb_ttpci stv0299 11784 3 budget_ci,budget,dvb_ttpci tda8083 6532 2 budget,dvb_ttpci stv0297 9408 1 dvb_ttpci sp8870 8076 1 dvb_ttpci ves1x93 7108 2 budget,dvb_ttpci ttpci_eeprom 2752 2 budget_core,dvb_ttpci dvb_core 84200 4 budget_ci,budget,budget_core,dvb_ttpci LSPCI ***** 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12) 0000:00:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 0000:00:0e.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 0000:00:10.5 Network controller: VIA Technologies, Inc. VT8237 Integrated Fast Ethernet Controller 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800 South] 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 0000:00:13.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) Manual start log ***************** mmc root # vdr -P"softdevice -vo dfb:mga_tv" -P"remote - i /dev/input/event2" -Pbitstreamout -Pmp3 -Pmplayer -Pdvd -Pfemon [softdevice] processing args [softdevice] argv [0] = softdevice [softdevice] argv [1] = -vo [setup-softdevice] alsa device set to: default [setup-softdevice] A/V Offset set to (0) [setup-softdevice] cropping mode set to 0 (none) [setup-softdevice] deinterlace method set to 0 none [softdevice] picture mirroring set to 0 (off) [setup-softdevice] pixel format set to (YUV2) [setup-softdevice] startup aspect set to (4:3 normal) [softdevice] initializing Plugin [softdevice] Initializing Video Out [softdevice] ffmpeg version(0.4.9-pre1) build(4743) [dfb] init (*) DirectFB/Config: Parsing config file '/etc/directfbrc'. ---------------------- DirectFB v0.9.22 --------------------- (c) 2000-2002 convergence integrated media GmbH (c) 2002-2004 convergence GmbH ----------------------------------------------------------- (*) DirectFB/Core: Single Application Core. (2005-05-21 14:06) (*) Direct/Memcpy: Using MMXEXT optimized memcpy() (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 7639)... (*) Direct/Thread: Running 'PS/2 Input' (INPUT, 7642)... (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802] (*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7643)... (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7644)... (*) DirectFB/Input: ImPS/2 Generic Wheel Mouse (2) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7645)... (*) DirectFB/Input: Budget-CI dvb ir receiver saa714Linux (3) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7646)... (*) DirectFB/Input: Budget-CI dvb ir receiver saa714Linux (4) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7647)... (*) DirectFB/Input: Budget-CI dvb ir receiver saa714Linux (5) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7648)... (*) DirectFB/Input: Microsoft Microsoft 3-Button MouLinux (6) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Linux Input' (INPUT, 7649)... (*) DirectFB/Input: PC Speaker (7) 0.1 (convergence integrated media GmbH) (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 7650)... (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) (*) DirectFB/Genefx: MMX detected and enabled (*) DirectFB/Graphics: Matrox G550 0.7 (convergence integrated media GmbH) (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH) [dfb] RAM: 16777216 bytes [dfb] Accellerated Functions: FillRectange DrawRectange DrawLine FillTriangle Blit StretchBlit All [dfb] Drawing Flags: Blend [dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize SrcColorkey Deinterlace [dfb] Supported video Modes are: 640x480@16 720x576@16 768x576@16 800x600@16 1024x768@16 1280x1024@16 1280x1024@16 1600x1200@16 640x400@16 400x300@16 320x240@16 320x200@16 [dfb] Enumeratig display Layers Layer 2 FBDev Primary Layer Type: graphics Caps: brightness contrast saturation surface [dfb] width = 720, height = 576 [dfb] got fmt = 0x00418c04 bpp = 32 [dfb] Using this layer for OSD: (Matrox CRTC2 Layer - [720x576]) osdSurface:: - videoonly - flipping videoSurface:: - videoonly [dfb] Configuring CooperativeLevel for Overlay [dfb] Configuring CooperativeLevel for OSD [dfb] Using this layer for OSD: Matrox CRTC2 Layer [dfb] Using this layer for Video out: FBDev Primary Layer [dfb] (re)configuring Videolayer to 720 x 576 (720x576) [dfb] creating new surface [dfb] (re)configured 0x00200806 [softdevice] Video Out seems to be OK [softdevice] Initializing Audio Out [softdevice] Audio out seems to be OK [softdevice] A/V devices initialized, now initializing MPEG2 Decoder mp3: filesource /tmp has no includes set mp3: using MPEG Audio Decoder 0.15.1 (beta) mp3: compiled with 0.15.1 (beta) mp3: filesource /tmp has no includes set cSoftDevice::MakePrimaryDevice Have attached dmesg as well. -- Mr Anthony Hornby RHCE BIT ALIATEC Library Systems & Technology Coordinator Charles Darwin University | CRICOS 300K anthony.hornby(a)cdu.edu.au | office +61 8 89 466011

4 5

Storing apid names in recordings
by Andreas Mair 24 May '05

24 May '05

Hi, I'm using VDR 1.3.24 and if I replay a recording and then press the "Audio" key I only get a list containing for example "1" and "33". In LiveTV mode the list reads "deutsch" and "dolby digital". It would be nice if this could also be the case in replay mode. Or do I miss something? Regards, Andreas

2 1

Dolby Digital : remeber last setting seperate for Replay and LiveAC3
by christian jacobsen 24 May '05

24 May '05

Hallo Klaus, Just wanted to bring this back into Memory - posted first time 10.02.2005. There is one small wish that I have. At the moment the last Audio Menu setting is stored so that if one used DD the last time it will also be used next time. Would it be possible to have a seperate setting for Replay ? What I mean. At the moment the last setting if DD was used or not is stored and reused - that is very nice :) But at the moment I would like to defaultly have no DD when watching Live as switch-times are better. In Replay I would really like to have DD as default as it is a lot nicer :) So how about seperating this "keep last setting" between LiveAC3 and Replay ? So that with the Audio Menu you can setup DD while replaying and it then will be used everytime you replay something with DD sound. And if you setup no DD in Live viewing VDR would not used DD while live viewing :) or the other way around if someone els would like that ... It could even be stored in the current setup.conf setting like this : Value of CurrentDolby 0 No Dolbydigital 1 LiveAC3 and Replay 2 LiveAC3 only 3 Replay only (Maybe bitstreamout needs some more !? At least Werner posted that in an answer) This would really be a nice feature :) I hope it is clear what I mean ... Thanks for VDR - a good program is getting even better with every release. Together with the Driver/Firmware bugfixes VDR 1.3.x is running more stable than 1.2.x ever did. I would like to say thanks to Klaus, Oliver, Werner and all others who have contributed for the good work :) Greting Christian Jacobsen

1 0

Starting VDR at reboot
by Lauri Tischler 24 May '05

24 May '05

Where should I put commands to start VDR at boot. Putting them in /etc/rc.boot is no good because lircd has not started yet. VDR needs to be the last thing to start at bootup.

5 5

VDR-1.3.24: OSD speedup
by Reinhard Nissl 23 May '05

23 May '05

Hi, the attached patch speeds up OSD display a little bit. I think it's wrong to tell cStatus that for example 2700 channel entries will be displayed when actually only 16 entries fit on screen. The other sections speed up paging beyond the first respectively last item (similarly to single line scrolling). Further ideas to reduce CPU load while scrolling: - Flush OSD after each scroll: will slow down scrolling and therefore most likely reduce CPU load. - Snoop ahead remote commands and do N scrolls at once, skipping N-1 paint operations. - Paint line by line and abort as soon as further remote commands arrive, to start over again. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

4 5

[ANNOUNCE] vdr-epgsearch-0.9.4
by cwieninger＠gmx.de 23 May '05

23 May '05

Hi, here's a new release of the epgsearch plugin. You can find it here: http://people.freenet.de/cwieninger/html/vdr-epg-search__english_.html wget: http://people.freenet.de/cwieninger/vdr-epgsearch-0.9.4.tgz What's new? - support for extended EPG info (categories like genre, audio, format) in search timers (please refer to the README 'Using extended EPG info'). - added a submenu to select an existing directory when editing a search timer. This menu can also be extended with entries in the file epgsearchdirs.conf - usage of variables like "%Genre%" or "%Category% in the directory entry of a search timer. These are replaced with the current extended EPG info when a timer is created. - key '0' in search menu now toggles the flag 'use as search timer' - fixed compilation for vdr < 1.3.18 (thanks to TomG@vdrportal) - updated script rememberevent.sh (thanks to Ronny Kornexl for complete rewrite and extensions) - added script epg2master-timer.sh for the commands menu, that adds an event to master-timer, thanks to the author Christian Jacobsen / Viking (vdrportal) - some changes to compile with bigpatch - removed font patch for progressbar, since runtime patch seems to work fine - added a script timerrep.sh to search the repeats of a timer from timer menu (requires the timercmds.conf-patch from Gerhard Steiner, see dir patches) - updated/rearranged README(.DE) and added also a MANUAL (only english) for detailed info about some topics, since README gets too big. - Added a description of the format of epgsearch.conf to MANUAL - fixed a bug with buttons display in search timer edit menu - a special thanks to Mike Constabel (vejoun@vdrportal) for great beta testing and suggestions, and to Rolf Ahrenberg for finnish translation. What is it about? EPG-Search can be used as a replacement for the default schedules menu entry. It looks like the standard schedules menu, but adds some additional functions: - Commands for EPG entries with 5 built-in commands like 'show repeats', 'create search'. One can add own commands for other needs, like adding a VDRAdmin auto-timer. - Add up to 4 user-defined times to 'now' and 'next' - Searching the EPG: Create reusable queries, which can also be used as 'search timers'. - Search timers: Search for broadcasts in the background and add a timer if one matches (similar to VDRAdmin's auto-timers) or simply make an annoucement about it via OSD - Progress bar in 'What's on now' and 'What's on next' - Shift the time displayed by keypress, e.g. 'What's on now' + 30 minutes - Start menu can be setup between 'Schedule' or 'What's on now' - background check for timer conflicts (requires a recent timeline plugin) - detailed epg menu (summary) allows jumping to the next/previous event - support for extended EPG info for search timers Works only for vdr-1.3.x (x>=7). Tested on 1.3.10 to 1.3.24. Parts of the sources are based on the repeating-EPG patch from Gerhard Steiner, who gave me the permission to use them (thanks for his work!). Best regards, Christian

1 0

[Fwd: Re: [vdr] Can't load the firmware on my Hauppauge Nova-T cards under Gentoo 2005]
by anthony hornby 23 May '05

23 May '05

Hi, sorry I left out the answer to one question. My kernel config has : grep -i hotplug ~ahornby/.config CONFIG_HOTPLUG=y # PCI Hotplug Support # CONFIG_HOTPLUG_PCI is not set mmc .xmltv # grep -i firm ~ahornby/.config # Firmware Drivers # CONFIG_PREVENT_FIRMWARE_BUILD is not set What do I need set? Anthony. -------- Forwarded Message -------- From: anthony hornby <anthony.hornby(a)cdu.edu.au> Reply-To: anthony.hornby(a)cdu.edu.au To: Klaus Schmidinger's VDR <vdr(a)linuxtv.org> Subject: Re: [vdr] Can't load the firmware on my Hauppauge Nova-T cards under Gentoo 2005 Date: Tue, 24 May 2005 00:52:57 +0930 Hi All, thanks to everyone that replied. Yes I have hotplug enabled in the kernel and the firmware is in /lib/firmware. I have tried linuxtv stable, linuxtv-cvs, technotrend extract using get_dvb_firmware, my firmware from my windows driver CD's - nothing works. Here's where hotplug is looking - from /etc/hotplug/firmware.agent <snip> # directory of the firmware files FIRMWARE_DIR=/lib/firmware </snip> So its looking in the right place. I have emerged hotplug, I have sysfs mounted: mmc .xmltv # cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext3 rw 0 0 none /proc proc rw,nodiratime 0 0 none /sys sysfs rw 0 0 none /dev ramfs rw 0 0 none /dev/pts devpts rw 0 0 /dev/hda1 /boot ext3 rw 0 0 none /dev/shm tmpfs rw 0 0 none /proc/bus/usb usbfs rw 0 0 Seems to detect stuff eg ls /sys/class/dvb/dvb* /sys/class/dvb/dvb0.demux0: dev /sys/class/dvb/dvb0.dvr0: dev /sys/class/dvb/dvb0.frontend0: dev /sys/class/dvb/dvb0.net0: dev /sys/class/dvb/dvb1.demux0: dev /sys/class/dvb/dvb1.dvr0: dev /sys/class/dvb/dvb1.frontend0: dev /sys/class/dvb/dvb1.net0: dev mmc .xmltv # cat /sys/devices/platform/i2c-0/name TT-Budget/WinTV-NOVA-T PCI mmc .xmltv # cat /sys/devices/platform/i2c-1/name TT-Budget/WinTV-NOVA-T PCI There seems to be some weird looping here though: cat /sys/devices/pci0000\:00/0000\:00\:0c.0/driver/0000\:00 \:0c.0/driver/0000\:00\:0c.0/driver/0000\:00\:0c.0/driver/ and so on ..... Permissions are open: mmc .xmltv # grep -i dvb /etc/udev/permissions.d/50-udev.permissions # DVB dvb:vdr:video:0666 dvb/*:vdr:video:0666 dvb/adapter*/*:vdr:video:0666 Devices get created: mmc .xmltv # grep -i dvb /etc/udev/rules.d/50-udev.rules # dvb devices KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c", GROUP="video", MODE="0666" mmc .xmltv # ls -la /dev/dvb/adapter0/* crw-rw-rw- 1 root video 212, 4 May 23 17:10 /dev/dvb/adapter0/demux0 crw-rw-rw- 1 root video 212, 5 May 23 17:10 /dev/dvb/adapter0/dvr0 crw-rw-rw- 1 root video 212, 3 May 23 17:10 /dev/dvb/adapter0/frontend0 crw-rw-rw- 1 root video 212, 7 May 23 17:10 /dev/dvb/adapter0/net0 I have tried the linuxtv-dvb-cvs package in ~x86 - that didn't fix the problem so I went back to a vanilla Gentoo 2.6.11-gentoo-r9 kernel and rebuilt it again. Oh just to confirm it is a low level driver issue dvbscan can't get a lock either. I know the transponder values are correct. /usr/bin/dvbscan -o vdr /usr/share/dvb/scan/dvb-t/au-Darwin; initial transponder 543625000 1 3 0 3 1 1 0 initial transponder 550500000 1 2 0 3 1 2 0 initial transponder 536625000 1 2 0 3 1 2 0 initial transponder 557625000 1 2 0 3 1 2 0 >>> tune to: 543625:I999B7C34D0M64T8G16Y0:T:27500: WARNING: >>> tuning failed!!! >>> tune to: 543625:I999B7C34D0M64T8G16Y0:T:27500: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 550500:I999B7C23D0M64T8G8Y0:T:27500: WARNING: >>> tuning failed!!! >>> tune to: 550500:I999B7C23D0M64T8G8Y0:T:27500: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 536625:I999B7C23D0M64T8G8Y0:T:27500: WARNING: >>> tuning failed!!! >>> tune to: 536625:I999B7C23D0M64T8G8Y0:T:27500: (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 557625:I999B7C23D0M64T8G8Y0:T:27500: WARNING: >>> tuning failed!!! >>> tune to: 557625:I999B7C23D0M64T8G8Y0:T:27500: (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Any help appreciated. Anthony. On Mon, 2005-05-23 at 17:46 +0300, Anssi Hannula wrote: > anthony hornby wrote: > > I can't load the firmware on my Hauppauge Nova-T cards under Gentoo > > 2005, using Gentoo-De ebuilds. > > > > This is weird as I have used these cards successfully under Fedora core > > 3 with no problems. > > > tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)... > > tda1004x: firmware upload complete > > tda1004x: found firmware revision 2c -- invalid > > It looks like the firmware format has changed or something like that. > Try using the dvb-fe-tda10045.fw from dvb-kernel CVS. > -- Mr Anthony Hornby RHCE BIT ALIATEC Library Systems & Technology Coordinator Charles Darwin University | CRICOS 300K anthony.hornby(a)cdu.edu.au | office +61 8 89 466011 -- Mr Anthony Hornby RHCE BIT ALIATEC Library Systems & Technology Coordinator Charles Darwin University | CRICOS 300K anthony.hornby(a)cdu.edu.au | office +61 8 89 466011

1 0

Re: Loadepg-0.1.4 and missing Digital+ EPG info
by Javier Marcet 23 May '05

23 May '05

On 5/10/05, tinconn(a)virgilio.it <tinconn(a)virgilio.it> wrote: > a new version of loadepg plugin has been released. > changelog: > 2005-05-10: Version 0.1.4 > - Fixed error compilation with VDR += 1.3.24 > Description: > This plugin create a new entry after the last channel of channels.conf > and then scan this channel for get a mhw epg list, after that delete the > new epg channel. > Any feedback is appreciated. > best regards kikko77 and a big thanks to lukkino Since Digital+ switched to the new subscriber cards, the MHW EPG info previously available on frequency 10847, is not broadcasted anymore. I tried with each and every channel I found on Astra 19.2E and I couldn't get epg data for Digital+. Is anyone aware of any transponder currently carrying this info? Otherwise, is there any other comfortable way to get epg data for the entire Digital+ package (either from Astra 19.2E or Hispasat 30.0W, sats over which Digital+ channels are broadcasted)? All the info I have received about the new EPG system is here: http://www.unsat.com/noticia_cuerpo.php3?numero=5890 Sorry it's in Spanish. Anyway, since it doesn't have a single word on technical details, it won't help us much anyway. -- The possession of a book becomes a substitute for reading it. -- Anthony Burgess Javier Marcet <javier(a)marcet.info>

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr