vdr

vdr@linuxtv.org

2 participants
6731 discussions

OT: ANNOUNCE of graphlcd based driver for LCDproc-0.5
by Lucian Muresan 13 May '05

13 May '05

Hi, even if it's off-topic on this list, the glcdlib driver I wrote for LCDproc emerged due to graphlcd which I heard of on this list first. You can have a look at http://www.muresan.de/graphlcd/lcdproc/ if you're interested. Many thanks go to Andreas Regel and the whole VDR developers and contributors. Regards, Lucian

3 7

VDR 1.2 versus 1.3 - DVB multi-channel recording
by Simon Baxter 13 May '05

13 May '05

Hi. I have a colleague running an old 1.2 version of VDR, with a Nova-T card, who says he can record multiple channels off the same mux at the same time. When I try this with 1.3.23 it can only record one. We're both using WinTV Nova-T budget cards, although his is the older 'phillips'? chipset and mine is the newer conexant. Any comments on this? Is it a VDR version difference??

2 4

skincurses column layout
by Simon Baxter 13 May '05

13 May '05

Is there any way I can control skincurses column formats? The 'now' and 'next' columns are not readable. They work fine under xine, but under skincurses they look like this : What's on now? Fri 13.05 14:33 1 BBC ON14:05 2 BBC TW13:30 3 BBC NE14:00 4 CBBC C14:30 5 Channe13:15 * 6 ITV114:00 *Lo 7 ITV214:30 *Ai 8 ITV305:55t IT V3 Nightscreen ITV Ne14:00 * 10 Bloomb14:00 * 13 BBC As14:00 14 1Xtra 12:00 15 BBC 714:30 S 16 BBC 6 13:00 17 BBC 5L12:00 18 BBC R513:00 thanks (in advance) Simon

1 0

Nova-T remote keys not working??
by Simon Baxter 13 May '05

13 May '05

Hi group. I have a Hauppauge WinTV NovaT card with the wired IR recevier and remote control. I can only get some of the remote keys to work, specifically the number keys. when I've modprobed cx88-dvb, I "tail -f /dev/input/event0" and hit some keys - I only get a response on the number keys. Similarly if I run VDR with the -P'remote -i /dev/input/event0' plugin it can only recognise number keys, not anything else. Am I doing something wrong? Can anyone shed any light on this? Thanks Simon

2 2

Feature Request: Improved cutting
by Helmut Auer 12 May '05

12 May '05

Hello, In the daily use of my vdr system there is just one point which is not really satisfying: When I decide to cut my recordings (when more than about 10 are waiting to be edited) I always have to wait to start the recording after setting the marks, because the last cut is not yet finished. It would be nice to have something like a "cutting queue", so that when "2" is pressed after editing the recording will be added to that queue, no matter if cutting is already running. -- Helmut Auer, helmut(a)helmutauer.de

9 10

[ANNOUNCE] UTF-8 patch 0.0.1 with Freetype2 font handling
by Alexander Riedel 12 May '05

12 May '05

Hi All! Sorry my English. Probably all have already faced a problem of Russian names and letters in vdr. For example it is impossible to use simultaneously both Russian and German letters in names of files (for example in MPlayer plugin). I recently have put myself vdr and it at once was not pleasant to me. So I a disgrace have changed all this. As fonts all of the different sizes and styles was necessary at the same time and freetype2 library to vdr to fasten. This is only with ttf fonts tested . Later the others I shall complete. Patch it is made for the version 1.3.23 In setup.conf added some parameters for definition of fonts. For example: FontFix = courbd.ttf FontFixSize = 16 FontOsd = arialbd.ttf FontOsdSize = 16 FontSml = verdana.ttf FontSmlSize = 12 By default fonts are as FontOsd arialbd.ttf size 16, FontSml arial.ttf size 12 und FontFix courbd.ttf size 15 These files at least for the first start should lay in config directories. For each channel in channels.conf it is possible to establish the character coding, the field is added in the end every line. For example: Das Erste;ARD:198500000:I0C34D12M16B7T8G4Y0:T:27500:101:102=deu:104:0:1:8468:9985:0:ISO8859-15 By default is ISO8859-15. Possible variants are listed in: iconv --list EPG data at reception are converted in UTF-8. So on a disk all (again created) files and descriptions will be already in UTF-8. I recommend to remove a file epg.data that data were already normally filled in UTF8 Pleasant viewings!!! -- Alexander Riedel

8 9

dd over dvb
by Halim Sahin 12 May '05

12 May '05

Hi, How can I use an external dd-receiver with vdr. I found an ac3 over dvb patch but that version was for vdr-1.3.10. Thanks Halim

1 0

Tuning information for French DVB-S free to air
by tony 12 May '05

12 May '05

Already posted to dvb-list but here it is again France 2:11591:v:S0.0W:19636:120:130:0:0:257:0:0:0 France 3:11591:v:S0.0W:19636:220:230:241:0:272:0:0:0 France 5:11591:v:S0.0W:19636:320:330:0:0:260:0:0:0 ARTE:11591:v:S0.0W:19636:520:530,531:0:0:261:0:0:0 LCP:11591:v:S0.0W:19636:620:630:0:0:262:0:0:0 France 4:11591:v:S0.0W:19636:420:430:0:0:259:0:0:0 Amusez vous bien les petits loups ! =:-D Tony

3 2

[ANNOUNCE] vdr-spider-0.1.0
by Thomas Günther 12 May '05

12 May '05

Hi! The first version of the 'Spider Arachnid' plug-in is ready. It's an implementation of the best patience game played on the On Screen Display of the VDR. See the project's homepage for details: http://www.toms-cafe.de/vdr/spider Download: http://toms-cafe.de/vdr/spider/vdr-spider-0.1.0.tgz Special thanks go to Klaus Schmidinger for his fantastic Video Disk Recorder, to Sascha Volkenandt for the Freecell plug-in from which the VDR specific parts are inspired, and to Patrick Maier for the card images of the Solitaire plug-in. Tom

1 0

[PATCH] make Makefile of 1.3.24 patch friendlier
by Ludwig Nussel 12 May '05

12 May '05

Hi, Following patch makes it easier for other patches to modify the list of linked libs without conflicting with each other. Also allow to change INCLUDES in Make.config and add -fPIC as that is needed for architectures != i386. Index: vdr-1.3.24/Makefile =================================================================== --- vdr-1.3.24.orig/Makefile +++ vdr-1.3.24/Makefile @@ -12,12 +12,14 @@ CC ?= gcc CFLAGS ?= -O2 CXX ?= g++ -CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual +CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual DVBDIR = ../DVB LSIDIR = ./libsi MANDIR = /usr/local/man BINDIR = /usr/local/bin +LIBS = -ljpeg -lpthread -ldl +INCLUDES = PLUGINDIR= ./PLUGINS PLUGINLIBDIR= $(PLUGINDIR)/lib @@ -29,7 +31,7 @@ DOXYFILE = Doxyfile -include Make.config -INCLUDES = -I$(DVBDIR)/include +INCLUDES += -I$(DVBDIR)/include SILIB = $(LSIDIR)/libsi.a @@ -106,7 +108,7 @@ $(DEPFILE): Makefile # The main program: vdr: $(OBJS) $(SILIB) - $(CXX) $(CXXFLAGS) -rdynamic $(OBJS) $(NCURSESLIB) -ljpeg -lpthread -ldl $(LIBDIRS) $(SILIB) -o vdr + $(CXX) $(CXXFLAGS) -rdynamic $(OBJS) $(NCURSESLIB) $(LIBS) $(LIBDIRS) $(SILIB) -o vdr # The font files: Index: vdr-1.3.24/Make.config.template =================================================================== --- vdr-1.3.24.orig/Make.config.template +++ vdr-1.3.24/Make.config.template @@ -14,7 +14,7 @@ CC = gcc CFLAGS = -O2 CXX = g++ -CXXFLAGS = -g -O2 -Wall -Woverloaded-virtual +CXXFLAGS = -fPIC -g -O2 -Wall -Woverloaded-virtual ### The directory environment: cu Ludwig -- (o_ Ludwig Nussel //\ SUSE LINUX Products GmbH, Development V_/_ http://www.suse.de/

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr