vdr

vdr@linuxtv.org

2 participants
6731 discussions

Updating actuator plugin
by YUP 16 Jan '12

16 Jan '12

Hi Luca, Maybe it is a right time to update your actuator plugin. There are some changes in vdr-1.7.23, it is enough to change SystemValues to SystemValuesSat to compile vdr-actuator against the last vdr-1.7.23, or simply: sed -i -e "s/SystemValues/SystemValuesSat/" actuator.c Regards, Yarema

1 0

[ANNOUNCE] S2API wrapper for VDR-1.7.23 (also upgrades 5.x to 5.3 API)
by Udo Richter 16 Jan '12

16 Jan '12

Hi list, And here I was, thinking that I could finally drop support for this old compatibility patch that noone really needs any more, and then the new VDR-1.7.23 requires linux-3.0 or newer headers to compile... yay... So here it is again: S2API Wrapper 0.8 is released, and should allow to compile a fully functional VDR on any DVB API headers from version 3.0 to 5.3, plus being able to use all features if the compiled binary is run on a newer kernel. Download: http://www.udo-richter.de/vdr/patches.en.html#dvb-api-wrapper http://www.udo-richter.de/vdr/patches.html#dvb-api-wrapper Cheers, Udo

2 2

howto ignore lines in channels.conf
by cedric.dewijs＠telfort.nl 16 Jan '12

16 Jan '12

Hi All, I would like to add some comments to channels.conf, and remove some channels I never watch. I have tried adding lines beginning with #, but this does not work, I still see those channels when I choose "channels" in VDR. What charakter can i add in front of a line to let the line be ignored? Best regards, Cedric

9 17

digitenne, howto watch pin-protected channels?
by cedric.dewijs＠telfort.nl 15 Jan '12

15 Jan '12

Hi all, I use vdr, oscam and sc to watch digitenne. I can see all the free to air, and scrambled channels without any problems. The only channel I can't watch is an adult channel. This channel is protected by a PIN code. When I use the origional digitenne receiver from the KPN, I can enter the pin code, and watch the channel. Could you please tell me where I can enter this pin code in VDR / oscam or the sc plugin? Best regards, Cedric

1 0

diseqc.con question
by Arturo Martinez 14 Jan '12

14 Jan '12

Hello, I have added a second dvb-s2 card to my vdr 1.7.21 box (for a total of 2 dvb-s2 cards, and nothing else) The first card (adapter0) is connected to a motor and diseqc.conf reflects this: S19.2E 11700 V 9750 t v W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 t S19.2E 99999 V 10600 t v W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 T S19.2E 11700 H 9750 t V W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 t S19.2E 99999 H 10600 t V W15 [E0 31 6B 13] W25 [E0 31 6B 13] W15 T S13.0E 11700 V 9750 t v W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 t S13.0E 99999 V 10600 t v W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 T S13.0E 11700 H 9750 t V W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 t S13.0E 99999 H 10600 t V W15 [E0 31 6B 0D] W25 [E0 31 6B 0D] W15 T S5.0E 11700 V 9750 t v W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 t S5.0E 99999 V 10600 t v W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 T S5.0E 11700 H 9750 t V W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 t S5.0E 99999 H 10600 t V W15 [E0 31 6B 05] W25 [E0 31 6B 05] W15 T Now the second card is connected to a diseqc 1.0 switch with 2 feeds (S5.0E and S0.8W) How can I modify diseqc.cond so that vdr is aware that only the second card can get 0.8W and S5.0E can be accessed by both cards?

2 1

Re: [vdr] shouldn't a vdr recording pause during status 3 flag?
by Lou 14 Jan '12

14 Jan '12

Turns out ZDF releases new event ids for each event instead of status 3 flagging, but they are all using the same pdc time (09:55). @Klaus: Are you aware, that recording only the 2nd event (12:05-03:55) is impossible in this case? vdr will automatically remove timers with the same pdc time, only one timer is kept, and vdr will start recording immediately, if you're already in the first event's timeframe (09:55-12:00). Shouldn't different event id make sure this doesn't happen? On 14.01.2012 10:21, Lou wrote: > > I noticed ZDF is boadcasting 3 sports sessions today using the same pdc > time for all three events: > > 09:55 - 12:00 Wintersport > 12:00 - 12:05 heute > 12:05 - 03:55 Wintersport > 03:55 - 04:00 heute > 04:00 - 05:00 Wintersport > > I'm test-recording this and will keep an eye on what's happening during > the "heute journal", maybe they use status 3 as well in this case to > remove the journal from vps recording? >

2 3

shouldn't a vdr recording pause during status 3 flag?
by Lou 14 Jan '12

14 Jan '12

I noticed one of my local broadcasters does actually flag a commercial break's starts and endings: Nov 3 16:48:37 channel 17 (TSR1) event Thu 03.11.2011 16:45-17:26 (VPS: 03.11 16:45) 'Hawaii Five-0' status 4 Nov 3 17:13:38 channel 17 (TSR1) event Thu 03.11.2011 16:45-17:26 (VPS: 03.11 16:45) 'Hawaii Five-0' status 3 Nov 3 17:16:08 channel 17 (TSR1) event Thu 03.11.2011 16:45-17:26 (VPS: 03.11 16:45) 'Hawaii Five-0' status 4 Nov 3 17:32:20 channel 17 (TSR1) event Thu 03.11.2011 17:26-17:35 '(null)' status 4 Nov 3 17:32:20 timer 8 (17 1645-1726 VPS 'Hawaii Five-0~Po'ipu') stop This looks legit to me, start and endings are always trimmed fine - so the question remains, why the recording does not pause during the commercial break? I'd love to avoid manual editing if possible.

7 12

Patch: Eliminate duplicate events when using xmltv2vdr
by Timo Eskola 12 Jan '12

12 Jan '12

Hi, I started to use xmltv2vdr for some channels with poor EPG data. I do not want to use xmltv2vdr for all channels so I modified xmltv2vdr.pl script to clear only the channels which will be grabbed with xmltv. The result was multiple EPG events for some programs. I found 2 issues in VDR code that caused this. 1. CLRE for a channel does not always clear all events. I compared CLRE for clearing all channels and noticed that it also clears events in timers. The patch will add this to CLRE for a channel. 2. Second problem was that for some reason there are small differences in events times in EPG and xmltv. The patch find events close to the current event during EPG scan. Now I have proper program data from EPG and xmltv. http://www.tolleri.net/vdr/vdr/vdr-1.7.21-clre-epgscan.patch Maybe Klaus can have a look if the changes can be implemented in VDR. Regards, Timo

2 1

digitenne disturbance, poor reception or mistake in descrambling?
by cedric.dewijs＠telfort.nl 12 Jan '12

12 Jan '12

Hi All, I have setup vdr to receive and decode digitenne. I have used the following manuals: https://wiki.archlinux.org/index.php/VDR https://wiki.archlinux.org/index.php/Digitenne Sometimes i see some disturbance in the received image. I wonder if this is due to poor reception, or by a problem of the decoding of the scrambled channels. Does vdr keep statistics of the reception quality? Is there any way I can get diagnostics of the sc plugin? Best regards, Cedric

2 1

problem in remux.c
by Joerg Riechardt 12 Jan '12

12 Jan '12

Hi Klaus, I just wanted to make you aware of http://www.vdr-portal.de/board16-video-disk-recorder/board8-vdr-grundlagen/… It is about a problem in remux.c Joerg

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr