Tuomas Jormola wrote:
I upgraded my VDR setup from 1.4.7 to 1.5.17. After the upgrade I've begun to see these CAM initialization and TS continuity error messages in the syslog (see the attached file). I'm using Technotrend 1500 DVB-C card with CI and Conax CAM and card from local cable operator.
No answer so far... Same error here. I have similar configuration. I'm using vdr-1.6.0 with xine plugin, kernel 2.6.24.3, multiproto drivers, Terratec Cinergy 1200 DVB-C with CI and Technisat Conax CAM (TechniCAM CX). It is impossible to watch either FTA or crypted channels with iserted CAM. At the same time, all this works with kaffeine and with gnutv from dvb-apps I can access CAM menu.
AK
Mar 30 15:24:24 vdr vdr: [10975] cTimeMs: using monotonic clock (resolution is 4000250 ns) Mar 30 15:24:24 vdr vdr: [10975] VDR version 1.6.0 started Mar 30 15:24:24 vdr vdr: [10975] codeset is 'UTF-8' - known Mar 30 15:24:25 vdr vdr: [10975] found 23 locales in /usr/local/src/vdr-1.6.0/locale Mar 30 15:24:25 vdr vdr: [10975] loading plugin: /usr/local/src/vdr-1.6.0-vanilla/PLUGINS/lib/libvdr-xine.so.1.6.0 Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/setup.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/sources.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/diseqc.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/channels.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/timers.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/commands.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/reccmds.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/svdrphosts.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/remote.conf Mar 30 15:24:25 vdr vdr: [10975] loading /usr/local/etc/vdr/keymacros.conf Mar 30 15:24:25 vdr vdr: [10976] video directory scanner thread started (pid=10975, tid=10976) Mar 30 15:24:25 vdr vdr: [10977] video directory scanner thread started (pid=10975, tid=10977) Mar 30 15:24:25 vdr vdr: [10975] reading EPG data from /usr/local/etc/vdr/epg.data Mar 30 15:24:25 vdr vdr: [10976] video directory scanner thread ended (pid=10975, tid=10976) Mar 30 15:24:25 vdr vdr: [10977] video directory scanner thread ended (pid=10975, tid=10977) Mar 30 15:24:25 vdr vdr: [10975] probing /dev/dvb/adapter0/frontend0 Mar 30 15:24:25 vdr vdr: [10979] CI adapter on device 0 thread started (pid=10975, tid=10979) Mar 30 15:24:25 vdr kernel: DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x01, val == 0x6a, ret == -121) Mar 30 15:24:25 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:26 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:26 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:27 vdr vdr: [10980] tuner on device 1 thread started (pid=10975, tid=10980) Mar 30 15:24:27 vdr vdr: [10981] section handler thread started (pid=10975, tid=10981) Mar 30 15:24:27 vdr vdr: [10975] found 1 video device Mar 30 15:24:27 vdr vdr: [10975] initializing plugin: xine (0.8.2): Software based playback using xine Mar 30 15:24:27 vdr vdr: [10982] XineRemote control thread started (pid=10975, tid=10982) Mar 30 15:24:27 vdr vdr: [10982] Entering cXineRemote thread Mar 30 15:24:27 vdr vdr: [10975] setting primary device to 2 Mar 30 15:24:27 vdr vdr: [10975] assuming manual start of VDR Mar 30 15:24:27 vdr vdr: [10975] SVDRP listening on port 2001 Mar 30 15:24:27 vdr vdr: [10975] starting plugin: xine Mar 30 15:24:27 vdr vdr: [10985] KBD remote control thread started (pid=10975, tid=10985) Mar 30 15:24:27 vdr vdr: [10975] ERROR: remote control XineRemote not ready! Mar 30 15:24:27 vdr vdr: [10975] remote control KBD - keys known Mar 30 15:24:28 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:30 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:30 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:32 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:33 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:33 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:36 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:37 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:37 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:39 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:41 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:41 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:43 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:44 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:44 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:47 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:48 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:48 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:51 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:52 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:52 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:54 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:56 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:56 vdr vdr: [10979] CAM 1: module ready Mar 30 15:24:57 vdr vdr: [10975] not all devices ready after 30 seconds Mar 30 15:24:57 vdr vdr: [10975] switching to channel 50 Mar 30 15:24:57 vdr vdr: [11006] transfer thread started (pid=10975, tid=11006) Mar 30 15:24:57 vdr vdr: [11007] receiver on device 1 thread started (pid=10975, tid=11007) Mar 30 15:24:57 vdr vdr: [11008] TS buffer on device 1 thread started (pid=10975, tid=11008) Mar 30 15:24:57 vdr vdr: [10975] setting watchdog timer to 60 seconds Mar 30 15:24:58 vdr vdr: [10979] CAM 1: module present Mar 30 15:24:59 vdr vdr: [10975] max. latency time 1 seconds Mar 30 15:24:59 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:24:59 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:02 vdr vdr: [10979] CAM 1: module present Mar 30 15:25:03 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:25:03 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:05 vdr kernel: DVB: TDA10021: tda10021_readreg: readreg error (ret == -121) Mar 30 15:25:05 vdr vdr: [10979] CAM 1: module present Mar 30 15:25:07 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:25:07 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:09 vdr vdr: [10979] CAM 1: module present Mar 30 15:25:10 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:25:10 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:11 vdr vdr: [10975] ERROR: Can't open CAM menu! Mar 30 15:25:13 vdr vdr: [10979] CAM 1: module present Mar 30 15:25:14 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:25:14 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:17 vdr vdr: [10979] CAM 1: module present Mar 30 15:25:18 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:25:18 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:20 vdr vdr: [10979] CAM 1: module present Mar 30 15:25:22 vdr kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Mar 30 15:25:22 vdr vdr: [10979] CAM 1: module ready Mar 30 15:25:23 vdr vdr: [10975] caught signal 2 Mar 30 15:25:23 vdr vdr: [10975] stopping plugin: xine Mar 30 15:25:23 vdr vdr: [11006] transfer thread ended (pid=10975, tid=11006) Mar 30 15:25:23 vdr vdr: [10975] cTS2PES got 3 TS errors, 1 TS continuity errors Mar 30 15:25:23 vdr vdr: [10975] cTS2PES got 2 TS errors, 1 TS continuity errors Mar 30 15:25:23 vdr vdr: [10975] buffer stats: 940 (0%) used Mar 30 15:25:23 vdr vdr: [10982] Leaving cXineRemote thread Mar 30 15:25:23 vdr vdr: [10982] XineRemote control thread ended (pid=10975, tid=10982) Mar 30 15:25:23 vdr vdr: [10985] KBD remote control thread ended (pid=10975, tid=10985) Mar 30 15:25:23 vdr vdr: [10975] saved setup to /usr/local/etc/vdr/setup.conf Mar 30 15:25:23 vdr vdr: [11008] TS buffer on device 1 thread ended (pid=10975, tid=11008) Mar 30 15:25:23 vdr vdr: [11007] buffer stats: 376 (0%) used Mar 30 15:25:23 vdr vdr: [11007] receiver on device 1 thread ended (pid=10975, tid=11007)