Re: [vdr] (offtopic) Voltage moding rev 1.3

Oliver Endriss wrote:

Paul Lacatus wrote:

...

Sorry about offtopic but from vdr wiki I found that there is a way to improve the stability of SNR and STR readings in vdr but didn't found relevant information to go further with the voltage moding. If somebody can give me a link I will be gratefull

See http://www.vdr-wiki.de/wiki/index.php/SpannungsMod I applied the first solution (loesung 1: original hauppauge):

• remove coil connected to pin 14 of the tuner
• connect tuner pin 14 with pin 4 (or pin 6)

Oops, the coil is _located_ at pin 14, but _connected_ to pin 13! So it should read: - remove coil connected to pin 13 of the tuner - connect tuner pin 13 with pin 4 (or pin 6)

Oliver