On Thursday 28 of February 2008, Seppo Ingalsuo wrote:
I'm having problems in getting my diseqc motor positioner to work with multiproto+h.264 patched vdr 1.5.16. It is at the moment very unreliable. Most of the time it just stays stuck into the old position so possibly the commands get corrupted. Is a Technotrend S2-3200 capable to control a positioner? My old budget-s Tecnotrend was very reliable in driving the same positioner.
I've also had such problem. This weekend I've tried to solve which part of sw is making this diseqc unreliability - and today I've tested the result once more.
My result is that the problem with stucked motor appears with new multiproto driver. When I'm using multiproto from 21.12. no problem appears at all.
My configuration is Debian Lenny, vdr-1.5.14 with rotor-0.1.4 (vdr-1.5.5-rotor.diff and Rotor-0.1.4-vdr1.5.10.diff patches), diseqc in vdr enabled (I've motor at 4th input of 4-input diseqc switch).
BTW - Repeat DiSEqC-Commands must be set to enabled (this seems to be related to my diseqc cascade with switch).
Hw is TT S2-3200, AMD Athlon 64 X2 - 5200+.
Regards,
Ales