On Sun, 20 Mar 2005, Stefan Lucke wrote:
On Sonntag, 20. März 2005 18:42, Klaus Schmidinger wrote:
Timo Laitinen wrote:
Hi,
I'm having some problems with the changing pids between programs with different language specifications on the YLE mux in Finland. The problem is that the pid changes a bit late on the program start, not during a black screen. As a result, there is a short gap in the beginning of the show, as vdr restarts the recording into a new file. The gap is visible/hearable also on live tv, even without recording taking place. The other muxes don't have this problem (their pids don't change). ...
I guess the best thing to do would be to complain to the broadcaster. The PIDs should be set correctly _before_ the programme starts.
changing pids of channel 1 from 512+128:650=eng:2321 to 512+128:650=fin:2321
No, just a minor change in the description. To my opinion, that must not result in retuning or interruption of recordings.
I've some similar reported on 2004-12-04 vdr-1.3.17, DVB-T, "changing transponder data of channel"
changing transponder data of channel 15 from T:522000000:0:1:0:2:1:2:1 to T:522000000:0:1:0:2:2:2:1
I can confirm these messages for Berlin. I assume vdr gets this information from NIT (pid 0x10)? then again the broadcaster is doing something weird? Or is vdr using the get_frontend-ioctl?
The flipping field is CoderateL, which afaik not in use anywhere in the world?! So normally it should be FEC_NONE as long as hierarchy is turned off. Maybe vdr should manually take care on that?
regards, Patrick.