Hello again,
i tried to access the card with VLC, and i got other errors: [00000390] dvb access error: FrontEndOpen: opening device failed (File or directory is nt found) [00000388] main input error: no suitable access module for `dvb://' [00000317] main playlist: nothing to play
The settings for VLC: "dvb:// :dvb-adapter=0 :dvb-frequency=11954000 :dvb-srate=27500000"
Do i need to load other modules, like dvb-core, or others? Or is my card nto supported?
Thank you again, and have a nice holiday
-----Original Message----- From: Daniel Tahin td9678td@aim.com To: vdr@linuxtv.org Sent: Wed, 24 Dec 2008 12:11 am Subject: [vdr] Installing a dvb-t card
Hello,
i'm a newbie in dvb-t under Linux. Perhaps my problem is alredy solved, or discussed. I would like to use a tv-card (Compro T750; it has an analog and dvb-t tuner) under Linux, because the software for windows has some annoying bug. If i try to load the driver (modprobe saa7134 i2c_scan=1), this appears after dmesg:
saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 21, latency: 32, mmio: 0xfb004000 saa7133[0]: subsystem: 185b:c900, board: UNKNOWN/GENERIC [card=0,autodetected] saa7133[0]: board init: gpio is 94bf00 saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 03 01 08 ff 00 89 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb saa7133[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x1e [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] saa7133[0]: i2c scan: found device @ 0xc2 [???] saa7133[0]: i2c scan: found device @ 0xc4 [???] saa7133[0]: i2c scan: found device @ 0xd0 [???] saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0
I'm not sure if i should install video4linux or linuxtv to recognize the card (or at least the dvb-t tuner on the card). Linux is Fedora 9, kernel: 2.6.25-14. And if i start VDR, i get this: vdr: no primary device found - using first device vdr version is 1.6.0.
Could someone help me please?
Thanx in advance, Daniel
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr