Hi,
i'd like to record movies with my Hauppauge PVR 350 and use my normal graphics card to view movies.
So i configured and installed the plugins analogtv and xine.
In one shell i start "vdr -Panalogtv -Pxine" and in another shell: xine "vdr:/tmp/vdr-xine/stream#demux:mpeg_pes"
I can see the OSD in xine, but only the background "No Signal".
I can record from /dev/video via command line, so basically it should work. Also, i can configure the keyboard keys for VDR and can use them to control VDR, i can see that with the OSD in xine.
In vdr i get the output attached below. I wonder about the line that says that says:
/dev/video0 ('WinTV PVR 350') does not support streaming i/o.
Whenever i press a key in VDR, i get an output line by "xine" that says:
vdr: osdflush: n: 1, 10, 4 # the numbers are varying.
So does VDR not update the screen of xine cyclically?
How can i get a picture in xine? Do i need another plugin? Or some other options?
Best regards, Torsten.
08:38:48 analogTV version 0.9.37 starting up ... 08:38:48 08:38:48 Copyright (C) 2003 .. 2005 by Andreas Kool (akool@gmx.de) 08:38:48 08:38:48 The analogTV plugin is the work of many people; 08:38:48 for at least a partial list see CREDITS. 08:38:48 08:38:48 analogTV comes with ABSOLUTELY NO WARRANTY; for details see COPYING. 08:38:48 This is free software, and you are welcome to redistribute it 08:38:48 under certain conditions; see COPYING for details. 08:38:48 08:38:48 Detected Linux version 2.6.12-default 08:38:48 Detected VDR version 1.3.33 08:38:48 Detected plain-vanilla VDR (hopefully :-) 08:38:48 cSchedules created SetVideoFormat: 0 08:38:48 Detected ConfigDirectory()="/video/plugins" 08:38:48 CPU AMD Duron(TM), family 6, model 8, stepping 1 08:38:48 CPU measured at 1350.040MHz 08:38:48 Using SSE optimized memcpy() vdr-xine: Client connecting ... vdr-xine: Client connected! 08:38:58 Switching to channel 0 on device 5 08:38:58 Switching to channel 0 on device 4 08:38:58 Channel: S 25, SID=12003, 335.25 MHz (S25), PAL 08:38:58 Video device: /dev/video0 08:38:58 Video source: 4: 08:38:58 NEW videodev=/dev/video0 08:38:58 Detected V4L version 2 08:38:58 Detected capture device Vanilla iTVC15 card 08:38:58 Detected hardware Hauppauge PVR 08:38:58 This device have a tuner 08:38:58 This device is able for capturing 08:38:58 This device have a onboard MPEG-Encoder 08:38:58 Detected Input#0: Composite 0 08:38:58 Detected Input#1: Composite 1 08:38:58 Detected Input#2: Composite 2 08:38:58 Detected Input#3: Composite 3 08:38:58 Detected Input#4: Tuner 0 08:38:58 Detected Input#5: Composite 4 08:38:58 Detected Input#6: S-Video 0 08:38:58 Detected Input#7: S-Video 1 08:38:58 Detected Input#8: S-Video 2 08:38:58 Detected Input#9: S-Video 3 08:38:58 NEW Frequency=335250 + 0 08:38:58 NEW videonorm=PAL 08:38:58 NEW videosource=4:Tuner 0 08:38:58 NEW picture properties 08:38:58 setPictureProperties(fd=9) failed, 34:Numerical result out of range 08:38:58 Could not set (all) picture properties 08:38:58 tune(5364) [frequency=335250, freqOffset=16, ofs=0] 08:38:58 setNorm(0:PAL (0xff)) 08:38:58 Switching to channel 1 on device 4 SetAudioChannelDevice: 0 08:38:58 Switching to channel 1 on device 5 SetVolumeDevice: 255 SetPlayMode: 1 08:38:58 NEW Audio-PID=300, Video-PID=301 08:38:58 runEncoder(Apid=300, Vpid=301) 08:38:58 mp1e -m 3 -j -e 1 -t 256 -g I -p /dev/dsp -c /dev/video0 -x /dev/mixer -d 4 -a 3 -b 5000000 -B 80 -r 14,91 -s 480x576 -S 44.1 -F 8 -G 496x576 -o /tmp/.analogtv.avi & 08:38:58 Sucessfully set encoder priority to -15 08:38:58 flush_buffer() mp1e:v4l25.c:216: /dev/video0 ('WinTV PVR 350') does not support streaming i/o. read(4) returned 0, error 0: Success vdr-xine: Client disconnected! SetPlayMode: 0