Sergei.Haller@math.uni-giessen.de(Sergei Haller) 30.05.05 00:45
On Sat, 28 May 2005, Rainer Zocholl (RZ) wrote:
RZ>> nvram-wakeup shuts down the box gracefully, but the box does not RZ>> wake up anymore! RZ>> RZ>> I am using the CSV verion of nvram-wakeup and did not had that RZ>> problem with 2.4.29 on teh same board and same conf.
it's the new kernel.
more precisely, it is the particular version of the ACPI or APM driver in the kernel.
The APM part of the BIOS is not detected anymore. So it's only ACPI.
when you shutdown your PC, the halt command (ACPI or APM) is called, which switches off the PC.
some boards do not wake up at all if you shutdown them using acpi. some boards do not wake up at all if you shutdown them using apm.
some boards do not wake up at all if you shutdown them using some particulat versions of acpi/apm.
See second reboot problem in README.reboot in the nvram-wakeup package.
I am trying this lines below to set the wakup event and it works only if i disable the "kill part" with hwclock! So i assume the problem is "hwclock".
#!/bin/sh LOGGER='logger -t pwroff' WAKETIME=`date -d "1970-01-01 $1 sec -5 min" +"%Y-%m-%d %H:%M:%S"` WAKEUPCMD=`echo $WAKETIME > /proc/acpi/alarm` $WAKEUPCMD ALARM=`cat /proc/acpi/alarm` echo "$ALARM" | $LOGGER #check if someone is logged on ommited shutdown -h now
Rainer