Hi Karim,
Karim schrieb am 20.05.2016 um 22:59:
lirc_serial is now loading :
dmesg [7.492111] lirc_serial: Manually using active low receiver [7.492378] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 2
Unfortunately, remote doesn't work (tested with mode2).
If you try it with your old setup, original lirc modules and the same config files - is then all ok? Are there any errors in syslog?
I noticed in ".config" file : # CONFIG_LIRC_SERIAL_TRANSMITTER is not set
I changed to : CONFIG_LIRC_SERIAL_TRANSMITTER=y
I think that you will need this only for any infrared sender.
Did I missed something ?
Hmm...
I restart lirc in my runvdr script like this:
/etc/init.d/lirc stop sleep 1 rmmod lirc_serial lirc_dev # to be sure sleep 1 setserial /dev/ttyS0 uart none sleep 1 /etc/init.d/lirc start
vdr:~ # dmesg | grep lirc lirc_dev: IR Remote Control driver registered, major 247 lirc_serial: Manually using active low receiver lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
vdr:~ # lsmod | grep lirc lirc_serial 18982 3 lirc_dev 19166 1 lirc_serial
vdr:~ # grep '^[A-Z]' /etc/sysconfig/lirc LIRCD_DEV_PERMISSIONS="660" LIRCD_DEV_OWNER="root:video" LIRCD_DRIVER="default" LIRCD_DEVICE="/dev/lirc0" LIRC_MODULE="lirc_serial" LIRCD_LISTENPORT= LIRCD_CONNECT=
Best regards. Andreas Böttger