----- Original Message ----- From: "Carsten Koch" Carsten.Koch@icem.com To: "Video Disk Recorder Mailing List" vdr@linuxtv.org Sent: Sunday, September 11, 2005 7:44 PM Subject: [vdr] SourceCaps patch for VDR 1.3.32.
The attached patch allows a VDR system with multiple cards to attach each card to an individual dish pointing at a different satellite.
I have 3 DVB cards in my VDR system:
FF card connected to one output of LNB at a dish pointed at Astra 19.2E.
budget card connected to another output of LNB at a dish pointed at Astra 19.2E.
budget card connected to output of LNB at a dish pointed at Eutelsat 13.0E.
I am using the following entries for that in my setup.conf:
SourceCaps = 1 S19.2E SourceCaps = 2 S19.2E SourceCaps = 3 S13.0E
Hello,
I have 2 DVB cards in my VDR system
1) FF card for Astra 19.2E and Eutelsat 13.0E.
2) budget card for Astra 19.2E
I am using the following entries for that in my setup.conf:
SourceCaps = 1 S19.2E S13.0E SourceCaps = 2 S19.2E
With vdr 1.3.22 - included patch for vdr 1.3.18 - sourcecaps-patch works fine (only the automatic scan for new channels produced mistakes).
Now i have tested this patch with vdr 1.3.34, but the first entry of SourceCaps in setup.conf will be ignored and is deleted after shutdown vdr.
Any suggestions?
Thanks
Frank