On 05/03/08 16:24, Tero Siironen wrote:
Klaus Schmidinger kirjoitti 2.5.2008 kello 17.03:
On 04/27/08 12:49, Tero Siironen wrote:
... I don't know if this is same problem or not but I'm having similar symptoms with one encrypted channel. With plain VDR 1.6.0 I cannot tune to that channel, while 1.4.7 works. As can be seen from the log, the receiving starts from couple of seconds but stops right after giving this channel not available message. My system has DVB-C 2.1 FF card and Satelco Easywatch budget card. All the other encrypted channels works ok, but this one channel has problems with VDR 1.6.0.
Your CAM seems to "come and go". Please try the 1.6.0-1 maintenance patch from
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.6.0-1.diff
which increases the time between the CAM status checks.
Doesn't help, log is pretty similar still and picture shows now and then for couple of seconds
Looks like there are no more unexpected CAM resets, so the reason for the "channel not available" must be something else. Maybe the CAM doesn't decrypt?
You could add some debug output to cDevice::Action() to see whether the TS packets are getting descrambled. Maybe the TS_SCRAMBLING_TIMEOUT needs to be increased.
Klaus