Hi,
Anssi Hannula wrote:
The transfer-mode uses always priority -1.
That presents a problem: If I connect to that vdr using streamdev, it switches the first budget device off from the multiplex transfered to the FF card, although there is a second identical budget device available.
Also, if I had DVB-S FF and only one DVB-T budget and had a DVB-T recording with priority 10 and Primary Limit at 20, live DVB-T video would (wouldn't it?) be severed.
Klaus, shouldn't transfer-mode be also using the Primary Limit value, so that recordings with priority less than Primary Limit couldn't distract the output of primary device?
Patch attached.
I think there is a problem with your patch. There is a reason for the priority -1. Imagine you have a channel which can only be received by one card and this card is used for transfer-mode. When you want to switch to this channel, the transfer-mode has, with your patch, e.g priority 0. But the new transfer-mode would have the same priority (but not a higher), so there would be no free device (channel not available). So when searching for a free device, vdr should consider that the device, which is used for transfer-mode, could be free, if transfer-mode for the current channel has ended.
Thomas