On 04/27/08 12:49, Tero Siironen wrote:
... I don't know if this is same problem or not but I'm having similar symptoms with one encrypted channel. With plain VDR 1.6.0 I cannot tune to that channel, while 1.4.7 works. As can be seen from the log, the receiving starts from couple of seconds but stops right after giving this channel not available message. My system has DVB-C 2.1 FF card and Satelco Easywatch budget card. All the other encrypted channels works ok, but this one channel has problems with VDR 1.6.0.
Here's the channels.conf entry:
EuroNews;GlobeCast:306000:C0M128:C:6875:2221:2232=eng,2233=deu,2231=fra,2234=ita,2235=esl,2236=por,2237=rus,2238:768:B00:214:0:10:0
and here's the syslog:
Apr 27 13:31:53 localhost vdr: [10238] cTimeMs: using monotonic clock (resolution is 999848 ns) Apr 27 13:31:53 localhost vdr: [10238] VDR version 1.6.0 started ... Apr 27 13:31:53 localhost vdr: [10251] CAM 1: module present ... Apr 27 13:31:55 localhost vdr: [10251] CAM 1: no module present Apr 27 13:31:55 localhost vdr: [10251] CAM 1: module present ... Apr 27 13:31:57 localhost vdr: [10251] CAM 1: no module present Apr 27 13:31:57 localhost vdr: [10251] CAM 1: module present ... Apr 27 13:31:59 localhost vdr: [10251] CAM 1: no module present Apr 27 13:31:59 localhost vdr: [10251] CAM 1: module present Apr 27 13:32:02 localhost vdr: [10251] CAM 1: module ready Apr 27 13:32:05 localhost vdr: [10251] CAM 1: Conax 4.00e, 01, 0B00, 04B1 Apr 27 13:32:09 localhost vdr: [10251] CAM 1: doesn't reply to QUERY - only a single channel can be decrypted ... Apr 27 13:33:32 localhost vdr: [10251] CAM 1: module reset Apr 27 13:33:32 localhost vdr: [10251] CAM 1: module present Apr 27 13:33:32 localhost vdr: [10238] switching to channel 1 Apr 27 13:33:32 localhost vdr: [10238] CAM 1: unassigned ... Apr 27 13:33:33 localhost vdr: [10251] CAM 1: module ready Apr 27 13:33:36 localhost vdr: [10251] CAM 1: Conax 4.00e, 01, 0B00, 04B1 Apr 27 13:33:41 localhost vdr: [10251] CAM 1: doesn't reply to QUERY - only a single channel can be decrypted
Your CAM seems to "come and go". Please try the 1.6.0-1 maintenance patch from
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.6.0-1.diff
which increases the time between the CAM status checks.
Klaus