En/na Simon Baxter ha escrit:
My setup.conf for the LNB has: LnbFrequHi = 11300 LnbFrequLo = 10750 LnbSLOF = 12500
If that's an universal lnb the correct settings are
LnbFrequHi = 10600 LnbFrequLo = 9750 LnbSLOF = 11700
Changed LNB settings to: Use DiSEqC: no SLOF (MHz): 11700 Low LNB frequency (MHz): 9750 High LNB frequency (MHz): 10600
But I'm still getting:
Oct 8 07:34:21 callin vdr: [1677] saved setup to /etc/vdr/vdr-1.7.15/setup.conf Oct 8 07:34:27 callin vdr: [1677] switching to channel 1 Oct 8 07:34:30 callin vdr: [1681] frontend 0/0 timed out while tuning to channel 1, tp 112483 Oct 8 07:35:35 callin vdr: [1681] frontend 0/0 timed out while tuning to channel 1, tp 112483
channels.conf: cat /etc/vdr/vdr-1.7.15/channels.conf Maori TV:12483:h:S160.0E:22500:514:652:0:0:1025:47:22:0
Devicestatus says: --- Device 1 -- Live (primary device) --- satellite card (ST STV0299 DVB-S) - /dev/dvb/adapter0/frontend0 frequency: 12483 MHz, signal: 60%, s/n: 44% currently no recordings 1 t + Maori TV ()
And I can still szap: ./szap -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV" reading channels from file '/etc/vdr/vdr-1.7.15/channels.conf' zapping to 1 'Maori TV': sat 0, frequency = 12483 MHz H, symbolrate 22500000, vpid = 0x0202, apid = 0x028c sid = 0x0000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal c94f | snr 95c4 | ber 0000ff17 | unc fffffffe | status 1f | signal ca5e | snr 9537 | ber 00000600 | unc fffffffe | FE_HAS_LOCK status 1f | signal ca76 | snr 95d6 | ber 00000700 | unc fffffffe | FE_HAS_LOCK status 1f | signal c940 | snr 95a9 | ber 00000600 | unc fffffffe | FE_HAS_LOCK status 1f | signal ca7e | snr 9558 | ber 00000600 | unc fffffffe | FE_HAS_LOCK
but no picture!
Any ideas?