Hello
Just found vdr 1.4.7 running instead of beeing switched off.
No audio no live image, but OSD works OK!
I can switch between channels, OSD displays the current(!) EPG Info! But no live image/sound!
Restarting VDR via OSD does not change anything.
But: Starting replaying a record make the TV "live" angain.
But: VDR now states -errornous-
dvb-ttpci: ARM crashed @ card 1
how can the OSD work with a crashed ARM?
I found: only the antenna signal was bad! (terristrical antenna dismounted long time ago, because no one uses DVB-T ...) Nothing had "crashed", no reason to stop recording or to restart VDR (what would not have helped!)
Since i upgraded to 1.4.7 ctvdr i have to "fiddle" every evening on the box to make (em, "try to" ) it run reliable again-
it's annoying and frustrating! What happend to vdr between 1.4.3 and 1.4.7? It seems to have become worser, not better.
("ARM crashed" i had 6 years ago in the beginningof the VDT with the -broken by design- 1.3 cards, but there only 2.x cards which ran flawlessly with 1.4.3.).
Are developpers happy with such mulish(?) behaviour of the software?
"break down entrirely if there is no antenna signal on one of 4(!) cards".
vdr:~# vdr:~# tail /var//log/messages 29:07 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762
WTF tuned to channel 87 at this time? (EPG scan, after 5h!) chanel 87 is on DVB-T. DVT-T has no antenna in the moment. Why does VDR have a problem with that "state" and does not handle ist benign?
It forgot to start recordings because EPG scan(!) tunes to a card without antenna!
A colleage who tried VDR became almost mad after he plugged in a second DVB-S: vdr contious to restart after a short while! You laugh? He he was not laughing because he already wasted an entire weekingend in swapping cards etc. until he learned that every card in the system MUST have a -good- antenna signal, regardless if the card is used or not... because EPG scan would use every card and that VDR behaves -unexpectable- sick without -good- antenna signals.
sevaral hours agao, EPG scan, which was on because of a reinstallation. Why is EPG scan enabled by default? It not needed for work, it ist only a "nice to have" because 1sec -in words one second- is saved after a program switch until the info is shown. It's not worth the trouble it made to turn it on by default!
29:24 vdr vdr: [3728] channel 7 (MDR FERNSEHEN) event Sat 16.02.2008 01:50-02:30 (VPS: 16.02 01:50) 'Brisant' status 1 29:24 vdr vdr: [3728] channel 7 (MDR FERNSEHEN) event Sat 16.02.2008 02:30-02:45 (VPS: 16.02 02:30) 'Tagesthemen' status 2 30:10 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762 30:16 vdr vdr: [3728] channel 7 (MDR FERNSEHEN) event Sat 16.02.2008 02:30-02:45 (VPS: 16.02 02:30) 'Tagesthemen' status 4 31:13 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762 32:16 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762 33:19 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762 34:22 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762 35:25 vdr vdr: [3721] frontend 0 timed out while tuning to channel 87, tp 762
Staringting the recording:
41:27 vdr vdr: [4211] loading /var/lib/video.00/11.000_Meter_unter_den_Meeren/Fernsehfilm_Kanada_2006_(Race _to_Mars)/2008-02-09.20.40.50.07.rec//marks.vdr 41:27 vdr vdr: [4238] TS buffer on device 2 thread ended (pid=4211, tid=4238) 41:27 vdr vdr: [4237] buffer stats: 0 (0%) used 41:27 vdr vdr: [4237] receiver on device 2 thread ended (pid=4211, tid=4237) 41:28 vdr vdr: [4240] dvbplayer thread started (pid=4211, tid=4240) 41:28 vdr vdr: [4241] non blocking file reader thread started (pid=4211, tid=4241) 41:28 vdr vdr: [4240] setting audio track to 1 (0)
stopped replay after few seconds
41:37 vdr kernel: dvb-ttpci: ARM crashed @ card 1
41:37 vdr kernel: dvb-ttpci: gpioirq unknown type=0 len=0 41:37 vdr kernel: dvb-ttpci: adac type set to 0 @ card 1 41:37 vdr vdr: [4221] frontend 1 lost lock on channel 1, tp 111837 41:37 vdr vdr: [4221] frontend 1 regained lock on channel 1, tp 111837
41:56 vdr vdr: [4222] changing pids of channel 159 from 901+901:902:204 to 701+701:702:204 42:10 vdr vdr: [4241] non blocking file reader thread ended (pid=4211, tid=4241) 42:10 vdr vdr: [4240] dvbplayer thread ended (pid=4211, tid=4240)
42:11 vdr vdr: [4211] switching to channel 1
42:11 vdr vdr: [4211] buffer stats: 0 (0%) used 42:12 vdr vdr: [4211] max. latency time 3 seconds 42:12 vdr vdr: [4243] receiver on device 2 thread started (pid=4211, tid=4243) 42:12 vdr vdr: [4244] TS buffer on device 2 thread started (pid=4211, tid=4244)
Rainer---<=====> Vertraulich // // <=====>--------------ocholl, Kiel, Germany ------------