Hello Tobi and all readers,
on Sunday, January 27, 2008 at 2:09:30 PM means Tobi:
Sebastian Dellit wrote:
The options for the control plugin are correct but the
Are you sure? The control plug-in must be configured to use the same tty as VDR. See the KEYB_TTY setting in /etc/default/vdr and the -t option in /etc/vdr/plugins/plugin.control.conf.
Thanks for this hint. I add the line
KEYB_TTY=/dev/tty1
after the line
OPTIONS="-w 60"
I also add a line
-t /dev/tty1
in the plugin config file.
When I start the vdr I geht the following error in the syslog:
Jan 27 14:18:12 media vdr: [4068] max. latency time 1 seconds Jan 27 14:18:12 media vdr: [4082] clearing device because of consecutive poll timeouts Jan 27 14:18:13 media vdr: [4083] buffer usage: 70% (tid=4082) Jan 27 14:18:13 media vdr: [4083] buffer usage: 80% (tid=4082) Jan 27 14:18:14 media vdr: [4083] buffer usage: 90% (tid=4082) Jan 27 14:18:14 media vdr: [4083] buffer usage: 100% (tid=4082) Jan 27 14:18:14 media vdr: [4083] ERROR: 1 ring buffer overflow (177 bytes dropped) Jan 27 14:18:20 media vdr: [4083] ERROR: 16516 ring buffer overflows (3105008 bytes dropped) Jan 27 14:18:26 media vdr: [4083] ERROR: 20564 ring buffer overflows (3866032 bytes dropped) [...]
I don't hear audio output from the tv or from my screenreader (suse blinux). When I stop the vdr with
# /etc/init.de/vdr stop
the stop process takes any secconds. When I restart the vdr with
# /etc/init.de/vdr restart
The audio output works fine but I means that an other vdr is loaded. :-/ The tty1 isn't mapped by the vdr.