What kind of fps to you get with 'glxgears'?
If you're only getting ~100fps, as I first was, the video will be bad. Mine's now around 500fps and smooth, using vdr-xine.
Shuttle FX43G AMD 2.2G Fedora Core 5 ----- Original Message ----- From: "Martin" Martin@Air-MaXX.net To: "'VDR Mailing List'" vdr@linuxtv.org Sent: Tuesday, May 30, 2006 8:28 AM Subject: RE: [vdr] TV-out, softdevice
Have your tried nvidia-config? Could be that you Sync to Blank.
Regards, Martin
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Johan Linder Sent: Tuesday, May 30, 2006 9:19 AM To: vdr@linuxtv.org Subject: [vdr] TV-out, softdevice
Hi! I've been trying for a while now to get the TV-out working smoothly. It feels like the TV-out is "computerized", like it's only 20fps or something. I've been searching the net for answers but haven't found any helping tips. Is it possible to get a smooth TV-out, or should I accept some
studdering?
I start vdr with: vdr -l 3 -P "softdevice -vo xv:" -P "subtitles" -P "osdteletext"
vdr-1.4.0, softdevice-0.2.3
// Johan
# lspci 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a2) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)
xorg.conf: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" #HorizSync 30.0 - 70.0 HorizSync 30 - 50 #VertRefresh 50.0 - 120.0 VertRefresh 50 - 50 Modeline "720x576" 13.5 720 744 800 864 576 586 590 624 -hsync -vsync interlace EndSection
Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "Unknown Board" Option "Connected Monitor" "TV" # Option "TwinView" "true" # Option "TwinViewOrientation" "Clone" Option "TVOutFormat" "SVIDEO" Option "TVStandard" "PAL-B" Option "TVOverScan" "0.6" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "50" Option "MetaModes" "1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384" EndSection
Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 Option "dpms" Option "XvMC" Option "RenderAccel" "on" Option "Overlay" "on" Option "NoFlip" "off" Option "UBB" "on" Option "XvmcUsesTextures" "on" Option "MultisampleCompability" "on" Option "OverlayDefaultVisual" "on" Option "HWCursor" "on" Option "AllowGLXWithComposite" "on" SubSection "Display" Viewport 0 0 Depth 24 # Modes "1024x768" Modes "720x576" EndSubSection EndSection
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr