2009/11/24 Füley István aironet@tigercomp.ro:
Hello list,
after some unsuccesfull tests with HD-VDR on Ubuntu, I decided to return to Opensuse (i'm using it for SD-VDR for about 4 years). I installed a fresh 11.2 x64 version, compiled v4l-dvb-b8eb9e860545 drivers, installed NVIDIA-Linux-x86_64-190.32, compiled xine-lib-1.2 patched with xine-lib-1.2-vdpau-r284.diff by Reinhard Nissl, vdr-1.7.9 with liemikuutio patch, vdr-xine-0.9.3 and PearlHD skin. I had to make the following settings to have a tear-free HD video:
- give 512 MB RAM for onboard video (i have 8200 onboard on Asus M3N78-VM,
2GB)
- set cpu-freq to the max. possible value of 2.1 GHz (aka "performance
governor") as i had problems letting cpu-freq to choose the cpu frequency (i don't understand, why, as i had no cpu load higher than 40% even on high bitrate HD channels) - AMD BE-2350
- disabling composite out in xorg.conf (I have a 1920x1080 LCD connected via
dvi)
- and the usual settings in ~/.xine/config for buffer values
Now VDR works fine even on high bitrate channels with "xine --post vdr_video --post vdr_audio --post upmix_mono --post vdr". The problem is, if I'm trying to activate deinterlacing in xine ( -Dtvtime:method=Greedy2Frame,cheap_mode=0,pulldown=0,use_progressive_frame_flag=1 and many other tvtime setups) I end up with some dropped frames and freezes on high bitrate HD channels (>12mbps).
Is this issue coming from my hardware's limitations (not enough CPU or GPU power), or is there any more things to fine-tune?
thanks,
István
Derek/VDR User uses xine as his vdr plugin and he uses vdpau, perhaps you should not use a software de-interlacer/post plugin, but rather tell vdpau to enable de-interlacing. on xineliboutput I use the tvtime output plugin, where I tell it to use my video output driver's de-interlacer.
8200 should be supported http://en.wikipedia.org/wiki/Nvidia_PureVideo
Hope this help, search the forum for Derek/VDR xine's command line.
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr