I had a 1.5.13 running for a while on a nexus FF.
I did install a second card, S2-3200, together with the multiproto driver
do you use the latest multiproto's version ?
and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird
I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few.
After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder
how did you start the scanning on vdr ?
I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ).
The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ?
there's reelchannelscan plugin 0.4.1 It works with dvb-s channels on vdr170 , not with dvb-s2.
-how can I check the signal on my S2-3200 card ?
femon-plugin will helpto you
-how can I reduce the logs from stb6100 ?
have a look on verbose option for stb6100 module - modinfo stb6100
-do I need to apply a concurrent recording patch to be able to stream 2 or more signals ?
which patch do you mean ?
Igor