En/na Nicolas Huillard ha escrit:
Leo Márquez a écrit :
I'm setting up a VDR with a budget cinergy 1200 terratec dvb-t card. The mobo is epia-M (svideo out). I want to use svideo but while I'm setting up I would use my crt monitor(softdevice+FB?) to see my vdr output.
The s-video and VGA and other outputs on EPIA-M output the exact same image. You can't have the VDR video on one output and the console on another. I think that's a limitation of the board, not of the CLE266. Said otherwise : the s-video + composite chip (VT1622) uses the VGA output and translate the signal type.
If you want to first use a CRT, then the TV, you're OK. That's what I did and it works.
This is exactly the thing I want. See VDR in the CRT (i have another computer to connect vis ssh)
If you want a console to control the vdr processes, you can either connect to a SSH server on your vdr box (from another PC, that you already have, haven't you ?), or add a second video card inside the box, make it primary, and make it work...
Can I done this with softdevice? With which output method?
This has nothing to do with softdevice.
And how know softdevice if has to use the vga cable to crt or the svideo to a TV?
What output methods have I to comment(to not be used) in softdevice makefile to do this?
You could use any output method you which, based on other criteria. I would suggest DirectFB (light, fast, etc.).
Finally when I put the VDR in my saloon what output method have I to choose to use the svideo out?(softdevice+DFB?)
Use the same as when testing. Softdevice has no problem to switch from one to another, but other criteria count : start an X server if you use X, thus stop it, get the right authorizations, etc.
I have no plan to use X but if I decide change softdevice to xine I think I will need it.
I'm just have built from source vdr 1.3.24 and try to make softdevice plugin. If I try the DirectFB the only thing I need is install directFB with apt? (i use debian) and comment the other output options in softdevice Makefile?
Thanks again.