voitto.tuomainen@nokia.com wrote:
My problem is that while I record one program, and change channel to another, which is not in the same channel transponder (?/multiplexer) as the one is recorded, I get the error: device 3 has no lock, can't attach receiver.
I have a similar problem with a Skystar2 and a FuSi Activy (both budget cards), both are connected to a 4-port LNB individually. Whenever a recording starts, I get the exact same error message... Software is SUSE 9.2-i386 w/ kernel 2.6.11.4-20050418133015 (sic!), vdr-1.3.26, linuxtv-dvb-1.1.1. Recording works fine on my other machine with vdr-1.3.26 with stock SUSE 9.3 drivers (kernel 2.6.11.4-21.7)
Log:
Jul 26 23:05:00 seneca vdr[15407]: record /video/Der_M344dchenmord_(1^B2)/2005-07-26.23:05.99.99.rec Jul 26 23:05:00 seneca vdr[15407]: creating directory /video/Der_M344dchenmord_(1^B2) Jul 26 23:05:00 seneca vdr[15407]: creating directory /video/Der_M344dchenmord_(1^B2)/2005-07-26.23:05.99.99.rec Jul 26 23:05:00 seneca vdr[15407]: recording to '/video/Der_M344dchenmord_(1^B2)/2005-07-26.23:05.99.99.rec/001.vdr' Jul 26 23:05:05 seneca vdr[15407]: ERROR: device 1 has no lock, can't attach rec eiver! Jul 26 23:05:05 seneca vdr[15407]: buffer stats: 0 (0%) used
Usually, device 1 is the Activy card because the skystar2 driver is loaded first:
Jul 29 20:13:52 seneca kernel: Linux video capture interface: v1.00 Jul 29 20:13:53 seneca kernel: saa7146: register extension 'dvb'. Jul 29 20:13:54 seneca kernel: drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev. 130) chip found Jul 29 20:13:54 seneca kernel: drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters Jul 29 20:13:54 seneca kernel: DVB: registering new adapter (SkyStar2). Jul 29 20:13:55 seneca kernel: i2c_readbytes: i2c read error (addr 0a, err == -121) Jul 29 20:13:56 seneca kernel: mt352_read_register: readreg error (ret == -121) Jul 29 20:13:56 seneca kernel: DVB: registering frontend 0 (Zarlink VP310 DVB-S) ... Jul 29 20:13:56 seneca kernel: saa7146: register extension 'budget dvb'. Jul 29 20:13:56 seneca kernel: saa7146: found saa7146 @ mem e0aa2000 (revision 1, irq 5) (0x1131,0x4f61). Jul 29 20:13:56 seneca kernel: DVB: registering new adapter (Fujitsu Siemens Activy Budget-S PCI). Jul 29 20:13:56 seneca kernel: adapter failed MAC signature check Jul 29 20:13:56 seneca kernel: encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff Jul 29 20:13:56 seneca kernel: DVB: registering frontend 1 (Philips TDA8083 DVB-S)...
Any idea?