On Wed, 25 Feb 2009 13:07:53 +0100 Paul Menzel paulepanter@users.sourceforge.net wrote:
I am planning to set up a low budget VDR using the VGA2SCART patches [1]. Therefore I need a VGA2SCART cable. The distance between the VDR and the CRT TV will be probably 5 meters.
There are some howtos on the WWW on how to build a cable yourself [2]. But I am not experienced in soldering, so I have the following questions.
- Are VGA2SCART cables you can buy also suitable and do you have
experiences what manufactures produce good quality cables?
I'm not sure whether C Scheeder is right, but it seems highly likely. Different cards need diffeernt types of cable. For example ATI and Matrox cards can both output the necessary composite sync, but they need slightly diffeernt wiring. Most other cards can't output composite sync so you need a circuit to combine them.
If you do go ahead and build a cable I'd recommend cutting one end off an existing VGA cable and using a multimeter to work out which wire is connected to which pin. Soldering SCART plugs isn't too bad because of their size, but VGA plugs are very fiddly.