Hi
I have budget card (Hauppauge WinTv NOVA-S Plus) digital satellite
receiver.
Kernel 2.6.16.18
Vdr-1.3.43
I am not getting osd after running vdr.
----I get the follwing messages regarding Hauppauge card during boot:-
Jun 14 19:23:31 localhost kernel: CORE cx88[0]: subsystem: 0070:9202,
board: Hauppauge Nova-S-Plus DVB-S
[card=37,autodetected]
Jun 14 19:23:31 localhost kernel: tveeprom 1-0050: Hauppauge model
92001, rev B1B1, serial# 415502
Jun 14 19:23:32 localhost kernel: cx88[0]: hauppauge eeprom: model=92001
Jun 14 19:23:32 localhost kernel: input: cx88 IR (Hauppauge Nova-S-Plus
as /class/input/input0
Jun 14 19:23:32 localhost kernel: cx88[0]/2: cx2388x based dvb card
Jun 14 19:23:32 localhost kernel: DVB: registering new adapter
(cx88[0]).
Jun 14 19:23:32 localhost kernel: DVB: registering frontend 0 (Conexant
CX24123/CX24109)...
If I run "# vdr -Pxine" I get the fiollwing messages in
/var/log/messages but still there is no OSD (Almost same message for
mplayer)
Jun 14 19:31:47 localhost vdr: [3666] VDR version 1.3.43 started
Jun 14 19:31:47 localhost vdr: [3666] switched to user 'vdr'
Jun 14 19:31:47 localhost vdr: [3666] loading plugin:/usr/lib/vdr/libvdr-xine.so.1.3.43
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/setup.conf
Jun 14 19:31:47 localhost vdr: [3666] ERROR: unknown config parameter:
InitialChannel = 8
Jun 14 19:31:47 localhost vdr: [3666] ERROR: unknown config parameter:
InitialVolume = 1
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/sources.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/diseqc.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/channels.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/timers.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/commands.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/reccmds.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/svdrphosts.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/remote.conf
Jun 14 19:31:47 localhost vdr: [3666] loading /etc/vdr/keymacros.conf
Jun 14 19:31:47 localhost vdr: [3666] found 1 video device
Jun 14 19:31:47 localhost vdr: [3666] initializing plugin: xine (0.7.6):
Software based playback using xine
Jun 14 19:31:47 localhost vdr: [3666] setting primary device to 2
Jun 14 19:31:47 localhost vdr: [3666] SVDRP listening on port 2001
Jun 14 19:31:47 localhost vdr: [3666] loading
/etc/vdr/themes/sttng-default.theme
Jun 14 19:31:47 localhost vdr: [3666] starting plugin: xine
Jun 14 19:31:47 localhost vdr: [3666] loading
/etc/vdr/themes/sttng-default.theme
Jun 14 19:31:47 localhost vdr: [3666] ERROR: remote control XineRemote
not ready!
Jun 14 19:31:57 localhost vdr: [3666] switching to channel 1
I get follwing messages also regarding dvb during boot up
Jun 14 19:23:29 localhost kernel: Linux video capture interface: v1.00
Jun 14 19:23:29 localhost kernel: saa7146: register extension 'budget
dvb'.
Jun 14 19:23:29 localhost kernel: saa7146: register extension
'budget_av'.
Jun 14 19:23:29 localhost kernel: saa7146: register extension 'budget_ci
dvb'.
Jun 14 19:23:29 localhost kernel: saa7146: register extension
'budget_patch dvb'.
Jun 14 19:23:29 localhost kernel: saa7146: register extension 'dvb'
Can any body suggest me what should I do to get VDR OSD.
--Regards
Gulab Chandra Yadava
______________________________________________________________ DISCLAIMER: This electronic message, and any attachments to this electronic message are intended for the exclusive use of the addressee(s)named herein and may contain legally privileged and confidential information. It is the property of Celstream Technologies Pvt. Ltd. If you are not the intended recipient, you are hereby strictly notified not to copy, forward, distribute or use this message or any attachments thereto. If you have received this message in error, please delete it and all copies thereof from your system and notify the sender at Celstream Technologies or administrator@celstream.com immediately _______________________________________________________________