Can anyone help me on my problem?
I've found I can get a picture with "mplayer /dev/dvb/adapter0/dvr0" when I szap, BUT only if I add the "-r" switch
szap -r -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV"
1) If I miss out the "-r" switch I can't get a picture from dvr0. 2) If I add the "-r" switch, mplayer detects the TS format and plays the live TV perfectly. 3) If I miss out the "-l 11300" I can't get the front end to lock
I still can't get the front end to lock in VDR either - so no recording and no live TV.
I've tried all sorts of LNB config in setup.conf - latest being: Use DiSEqC: no SLOF (MHz): 11700 Low LNB frequency (MHz): 9750 High LNB frequency (MHz): 10600
But I can't get it to work.
Any ideas?
But I'm still getting:
Oct 8 07:34:21 callin vdr: [1677] saved setup to /etc/vdr/vdr-1.7.15/setup.conf Oct 8 07:34:27 callin vdr: [1677] switching to channel 1 Oct 8 07:34:30 callin vdr: [1681] frontend 0/0 timed out while tuning to channel 1, tp 112483 Oct 8 07:35:35 callin vdr: [1681] frontend 0/0 timed out while tuning to channel 1, tp 112483
And I can still szap: ./szap -l 11300 -c /etc/vdr/vdr-1.7.15/channels.conf "Maori TV" reading channels from file '/etc/vdr/vdr-1.7.15/channels.conf' zapping to 1 'Maori TV': sat 0, frequency = 12483 MHz H, symbolrate 22500000, vpid = 0x0202, apid = 0x028c sid = 0x0000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal c94f | snr 95c4 | ber 0000ff17 | unc fffffffe | status 1f | signal ca5e | snr 9537 | ber 00000600 | unc fffffffe | FE_HAS_LOCK status 1f | signal ca76 | snr 95d6 | ber 00000700 | unc fffffffe | FE_HAS_LOCK status 1f | signal c940 | snr 95a9 | ber 00000600 | unc fffffffe | FE_HAS_LOCK status 1f | signal ca7e | snr 9558 | ber 00000600 | unc fffffffe | FE_HAS_LOCK