Hi.
I have just got a TechnoTrend 1500-C budget with CI and Irdeto CAM working with vdr-1.5.5.
I was hoping to be able to view and record multiple channels in a boquet/transponder (as I've previously done with a dvb-t card and freeview). All my channels under dvb-c are encrypted:
Sky 1;T:594000:C0M64:C:XXXX:529:530:0:606:201:182:2:0 Juice 2;T:594000:C0M64:C:XXXX:577:578:0:606:204:182:2:0
When I try and record 1 and watch/record the other I get:
Jul 21 22:37:46 media1 vdr: [5680] record /media/video/vdr/@J2_-_Our_Kind_of_Music_Press_'i'_for_more_information./200 7-07-21.22.37.50.99.rec Jul 21 22:37:46 media1 vdr: [5680] info: Recording started Jul 21 22:37:50 media1 vdr: [5680] switching to channel 1 Jul 21 22:37:51 media1 vdr: [5680] info: Channel not available! Jul 21 22:37:53 media1 vdr: [5680] switching to channel 2
Is there anything I can do to get this working?
Also - when vdr starts up initially, it takes about 20 seconds before I get a picture:
Jul 21 22:44:37 media1 vdr: [5764] VDR version 1.5.5 started Jul 21 22:44:37 media1 vdr: [5764] codeset is 'ISO-8859-1' - known Jul 21 22:44:37 media1 vdr: [5764] loading plugin: ./PLUGINS/lib/libvdr-xine.so.1.5.5 Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/setup.conf Jul 21 22:44:37 media1 vdr: [5764] ERROR: unknown config parameter: MenuButtonCloses = 0 Jul 21 22:44:37 media1 vdr: [5764] ERROR: unknown config parameter: SortTimers = 1 Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/sources.conf Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/channels.conf Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/timers.conf Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/remote.conf Jul 21 22:44:37 media1 vdr: [5768] CAM 1: module present Jul 21 22:44:38 media1 vdr: [5764] found 1 video device Jul 21 22:44:38 media1 vdr: [5764] initializing plugin: xine (0.7.9): Software based playback using xine Jul 21 22:44:38 media1 vdr: [5764] setting primary device to 2 Jul 21 22:44:38 media1 vdr: [5764] SVDRP listening on port 2001 Jul 21 22:44:38 media1 vdr: [5764] setting current skin to "sttng" Jul 21 22:44:38 media1 vdr: [5764] loading /media/video/vdr-1.3.36/themes/sttng-default.theme Jul 21 22:44:38 media1 vdr: [5764] starting plugin: xine Jul 21 22:44:38 media1 vdr: [5764] ERROR: remote control XineRemote not ready! Jul 21 22:44:40 media1 kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Jul 21 22:44:40 media1 vdr: [5768] CAM 1: module ready Jul 21 22:44:42 media1 vdr: [5768] CAM 1: Irdeto Access, 01, 06FF, 06FF Jul 21 22:44:47 media1 vdr: [5764] switching to channel 2 Jul 21 22:44:47 media1 vdr: [5764] info: Channel not available! Jul 21 22:44:49 media1 vdr: [5764] switching to channel 1 Jul 21 22:44:49 media1 vdr: [5764] info: Channel not available! Jul 21 22:44:49 media1 vdr: [5764] ERROR: Channel not available! Jul 21 22:45:02 media1 vdr: [5764] switching to channel 1 Jul 21 22:45:04 media1 vdr: [5764] retuning due to modification of channel 1
Thanks
Simon
On 07/21/07 12:50, Simon Baxter wrote:
Hi.
I have just got a TechnoTrend 1500-C budget with CI and Irdeto CAM working with vdr-1.5.5.
I was hoping to be able to view and record multiple channels in a boquet/transponder (as I've previously done with a dvb-t card and freeview). All my channels under dvb-c are encrypted:
Sky 1;T:594000:C0M64:C:XXXX:529:530:0:606:201:182:2:0 Juice 2;T:594000:C0M64:C:XXXX:577:578:0:606:204:182:2:0
When I try and record 1 and watch/record the other I get:
Jul 21 22:37:46 media1 vdr: [5680] record /media/video/vdr/@J2_-_Our_Kind_of_Music_Press_'i'_for_more_information./200 7-07-21.22.37.50.99.rec Jul 21 22:37:46 media1 vdr: [5680] info: Recording started Jul 21 22:37:50 media1 vdr: [5680] switching to channel 1 Jul 21 22:37:51 media1 vdr: [5680] info: Channel not available! Jul 21 22:37:53 media1 vdr: [5680] switching to channel 2
Is there anything I can do to get this working?
Also - when vdr starts up initially, it takes about 20 seconds before I get a picture:
Jul 21 22:44:37 media1 vdr: [5764] VDR version 1.5.5 started Jul 21 22:44:37 media1 vdr: [5764] codeset is 'ISO-8859-1' - known Jul 21 22:44:37 media1 vdr: [5764] loading plugin: ./PLUGINS/lib/libvdr-xine.so.1.5.5 Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/setup.conf Jul 21 22:44:37 media1 vdr: [5764] ERROR: unknown config parameter: MenuButtonCloses = 0 Jul 21 22:44:37 media1 vdr: [5764] ERROR: unknown config parameter: SortTimers = 1 Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/sources.conf Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/channels.conf Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/timers.conf Jul 21 22:44:37 media1 vdr: [5764] loading /media/video/vdr-1.3.36/remote.conf Jul 21 22:44:37 media1 vdr: [5768] CAM 1: module present Jul 21 22:44:38 media1 vdr: [5764] found 1 video device Jul 21 22:44:38 media1 vdr: [5764] initializing plugin: xine (0.7.9): Software based playback using xine Jul 21 22:44:38 media1 vdr: [5764] setting primary device to 2 Jul 21 22:44:38 media1 vdr: [5764] SVDRP listening on port 2001 Jul 21 22:44:38 media1 vdr: [5764] setting current skin to "sttng" Jul 21 22:44:38 media1 vdr: [5764] loading /media/video/vdr-1.3.36/themes/sttng-default.theme Jul 21 22:44:38 media1 vdr: [5764] starting plugin: xine Jul 21 22:44:38 media1 vdr: [5764] ERROR: remote control XineRemote not ready! Jul 21 22:44:40 media1 kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Jul 21 22:44:40 media1 vdr: [5768] CAM 1: module ready Jul 21 22:44:42 media1 vdr: [5768] CAM 1: Irdeto Access, 01, 06FF, 06FF Jul 21 22:44:47 media1 vdr: [5764] switching to channel 2 Jul 21 22:44:47 media1 vdr: [5764] info: Channel not available! Jul 21 22:44:49 media1 vdr: [5764] switching to channel 1 Jul 21 22:44:49 media1 vdr: [5764] info: Channel not available! Jul 21 22:44:49 media1 vdr: [5764] ERROR: Channel not available! Jul 21 22:45:02 media1 vdr: [5764] switching to channel 1 Jul 21 22:45:04 media1 vdr: [5764] retuning due to modification of channel 1
Does your log contain any of these lines?:
Jul 21 12:30:41 video vdr: [3935] CAM 1: replies to QUERY - multi channel decryption possible Jul 21 12:30:42 video vdr: [3939] CAM 3: doesn't reply to QUERY - only a single channel can be decrypted
Should be self-explanatory ;-)
Klaus
Does your log contain any of these lines?:
Jul 21 12:30:41 video vdr: [3935] CAM 1: replies to QUERY - multi channel
decryption possible
Jul 21 12:30:42 video vdr: [3939] CAM 3: doesn't reply to QUERY - only a
single channel can be decrypted
Should be self-explanatory ;-)
No, all I get is "info: Channel not available!"
Here's the logs from starting recording on channel 2, and trying to switch to channel 1, with these 2 channels in the same transponder : Sky 1;T:594000:C0M64:C:XXXX:529:530:0:606:201:182:2:0 Juice 2;T:594000:C0M64:C:XXXX:577:578:0:606:204:182:2:0
/var/log/messages: Jul 22 07:23:51 media1 vdr: [5764] timer 1 (2 0723-1023 '@TITLE EPISODE') start Jul 22 07:23:51 media1 vdr: [5764] record /media/video/vdr/@J2_-_Our_Kind_of_Music_Press_'i'_for_more_information./200 7-07-22.07.23.50.99.rec Jul 22 07:23:51 media1 vdr: [5764] info: Recording started Jul 22 07:24:01 media1 vdr: [5764] switching to channel 1 Jul 22 07:24:01 media1 vdr: [5764] info: Channel not available! Jul 22 07:24:03 media1 vdr: [5764] switching to channel 2 Jul 22 07:24:21 media1 vdr: [5764] confirm: Stop recording? Jul 22 07:24:21 media1 vdr: [5764] warning: Stop recording? Jul 22 07:24:27 media1 vdr: [5764] confirmed
are there more debugs I should have on?
Does your log contain any of these lines?:
Jul 21 12:30:41 video vdr: [3935] CAM 1: replies to QUERY - multi
channel
decryption possible
Jul 21 12:30:42 video vdr: [3939] CAM 3: doesn't reply to QUERY - only a
single channel can be decrypted
Should be self-explanatory ;-)
No, all I get is "info: Channel not available!"
Here's the logs from starting recording on channel 2, and trying to switch to channel 1, with these 2 channels in the same transponder : Sky 1;T:594000:C0M64:C:XXXX:529:530:0:606:201:182:2:0 Juice 2;T:594000:C0M64:C:XXXX:577:578:0:606:204:182:2:0
/var/log/messages: Jul 22 07:23:51 media1 vdr: [5764] timer 1 (2 0723-1023 '@TITLE EPISODE') start Jul 22 07:23:51 media1 vdr: [5764] record
/media/video/vdr/@J2_-_Our_Kind_of_Music_Press_'i'_for_more_information./200
7-07-22.07.23.50.99.rec Jul 22 07:23:51 media1 vdr: [5764] info: Recording started Jul 22 07:24:01 media1 vdr: [5764] switching to channel 1 Jul 22 07:24:01 media1 vdr: [5764] info: Channel not available! Jul 22 07:24:03 media1 vdr: [5764] switching to channel 2 Jul 22 07:24:21 media1 vdr: [5764] confirm: Stop recording? Jul 22 07:24:21 media1 vdr: [5764] warning: Stop recording? Jul 22 07:24:27 media1 vdr: [5764] confirmed
are there more debugs I should have on?
I've turned on "static bool DebugProtocol = true;" in ci.c and still get none of these "CAM 1:" messages ????
any ideas?
On 07/21/07 21:37, Simon Baxter wrote:
Does your log contain any of these lines?:
Jul 21 12:30:41 video vdr: [3935] CAM 1: replies to QUERY - multi
channel
decryption possible
Jul 21 12:30:42 video vdr: [3939] CAM 3: doesn't reply to QUERY - only a
single channel can be decrypted
Should be self-explanatory ;-)
No, all I get is "info: Channel not available!"
Here's the logs from starting recording on channel 2, and trying to switch to channel 1, with these 2 channels in the same transponder : Sky 1;T:594000:C0M64:C:XXXX:529:530:0:606:201:182:2:0 Juice 2;T:594000:C0M64:C:XXXX:577:578:0:606:204:182:2:0
/var/log/messages: Jul 22 07:23:51 media1 vdr: [5764] timer 1 (2 0723-1023 '@TITLE EPISODE') start Jul 22 07:23:51 media1 vdr: [5764] record
/media/video/vdr/@J2_-_Our_Kind_of_Music_Press_'i'_for_more_information./200
7-07-22.07.23.50.99.rec Jul 22 07:23:51 media1 vdr: [5764] info: Recording started Jul 22 07:24:01 media1 vdr: [5764] switching to channel 1 Jul 22 07:24:01 media1 vdr: [5764] info: Channel not available! Jul 22 07:24:03 media1 vdr: [5764] switching to channel 2 Jul 22 07:24:21 media1 vdr: [5764] confirm: Stop recording? Jul 22 07:24:21 media1 vdr: [5764] warning: Stop recording? Jul 22 07:24:27 media1 vdr: [5764] confirmed
are there more debugs I should have on?
I've turned on "static bool DebugProtocol = true;" in ci.c and still get none of these "CAM 1:" messages ????
These log entries are independent of the DebugProtocol setting.
Are you running VDR with reduced logging (option -l)? If so, please run it with the default (-l3) which is "full logging".
Are all your logs going into a single log file (/var/log/messages), or are you spreading the logs into several files? Maybe the debug log entries go somewhere else on your system.
Klaus
are there more debugs I should have on?
I've turned on "static bool DebugProtocol = true;" in ci.c and still
get
none of these "CAM 1:" messages ????
These log entries are independent of the DebugProtocol setting.
Are you running VDR with reduced logging (option -l)? If so, please run it with the default (-l3) which is "full logging".
Are all your logs going into a single log file (/var/log/messages), or are you spreading the logs into several files? Maybe the debug log entries go somewhere else on your system.
Sorry, I am getting messages like: Jul 23 07:38:51 media1 kernel: dvb_ca adapter 0: DVB CAM detected and initialised successfully Jul 23 07:38:51 media1 vdr: [4597] CAM 1: module ready Jul 23 07:38:54 media1 vdr: [4597] CAM 1: Irdeto Access, 01, 06FF, 06FF
and all (-l3) logs are going to /var/log/messages
But I'm not getting these QUERY messages. Just get "channel not available" on the OSD and "info: Channel not available!" in the logs whenever a second channel in the stream is requested.
Maybe I have a setting in setup.conf which is stopping it even trying/checking for another channel in the TS? Or is my channels.conf wrong? Sky 1;T:594000:M64:C:XXXX:529:530:0:606:201:182:2:0 Juice 2;T:594000:M64:C:XXXX:577:578:0:606:204:182:2:0 Food TV;T:602000:M64:C:XXXX:817:818:0:606:303:182:3:0
-Simon
-
Klaus Schmidinger -
Simon Baxter