Dear All,
Is any way to specify specific DVB-S card in channel.conf in a way that some channels are sourced via /dev/dvb/adapter0 and other channels sourced via /dev/dvb/adapter1
Thanking in advance, Vladimir Kangin
On Thu, Aug 7, 2008 at 9:39 AM, Vladimir Kangin v@kangin.org wrote:
If you figure that out, let me know. I know some other guys who would be thrilled to know of a way to assign certain channels to certain cards!
Ales,
I found a lot of information with regards Sourcecap for older version vdr. I'm using lmcevdr (1.6.0/1.6.0)
root@dcerouter:~# vdr -V lmcevdr (1.6.0/1.6.0) - The Video Disk Recorder - LMCEversion control (0.0.2a) - Control VDR over terminal or telnet xineliboutput (1.0.0~rc2-cvs-LMCE0710-8) - LMCEVDRoutput based on X11/xine-lib output plugin
I just guessing that is already integrated.
On Thu, 2008-08-07 at 20:44 +0200, Ales Jurik wrote:
Email with the patch: http://www.linuxtv.org/mailinglists/vdr/2004/12-2004/msg00647.html
----- Original Message ----- From: "Ales Jurik" ajurik@quick.cz To: "VDR Mailing List" vdr@linuxtv.org Sent: Thursday, August 07, 2008 11:44 AM Subject: Re: [vdr] Is any way to specify specific DVB-S card in channel.conf
So in your example: ...:0002,1702,1722,1801:... Would retain the CA info but only try to use the second adapter to tune it? Does it matter where in the list it's placed?
----- Original Message ----- From: "Klaus Schmidinger" Klaus.Schmidinger@cadsoft.de To: vdr@linuxtv.org Sent: Thursday, August 07, 2008 1:35 PM Subject: Re: [vdr] Is any way to specify specific DVB-S card in channel.conf
On 08/08/08 06:35, Timothy D. Lenz wrote:
No. As it is right now, the CA field can either contain a device number or encryption systems.
VDR normally assumes that every device can receive all sat positions (through a multiswitch), and automatically detects which device can decrypt a given encrypted channel.
Klaus
Will, assuming such things is a problem. With the mix of lnb types each limited in what they can get but often overlapping other designs and a mix of tunners again covering different types of signals, You need to be able to match stuff up. In NA we have stuff on c-band and ku, both linner and circular, dvb and dvb-s2 and sub veriants. Most anyone who has more then 1 dvb device has a mix of devices and likly a mixed dish setup.
----- Original Message ----- From: "Klaus Schmidinger" Klaus.Schmidinger@cadsoft.de To: vdr@linuxtv.org Sent: Saturday, August 16, 2008 3:18 AM Subject: Re: [vdr] Is any way to specify specific DVB-S card in channel.conf
On Thu, Aug 7, 2008 at 1:35 PM, Klaus Schmidinger Klaus.Schmidinger@cadsoft.de wrote:
If the device you need for that channel is the first device (device 0), then what? Lotta guys have mixed setups these days. Some cards can do certain modulations, some can't. Some cards are dvb-s while some are dvb-s2.
Cheers
And then there is the dishes, Some fixed, some not, some LNB's cove a different range that can over lap others in the set up meaning not only do you need to be able to list tunners for channels, but provide a list of lnbs that can be used as well. ----- Original Message ----- From: "VDR User" user.vdr@gmail.com To: "VDR Mailing List" vdr@linuxtv.org Sent: Friday, August 08, 2008 9:37 AM Subject: Re: [vdr] Is any way to specify specific DVB-S card in channel.conf
-
Ales Jurik -
Klaus Schmidinger -
Timothy D. Lenz -
VDR User -
Vladimir Kangin