I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator:
I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator:
I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg:
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Diff file attached
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator:
I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
I have applied your patch against vdrconvert-0.2.0 not 0.2.1, it works, but only the 2 channel audio stream is in the .iso file
projectx output: Video: PID: 0xFF Audio: PID: 0x100(deu) PID: 0x103(AC-3)(deu)[PD]
--> MPEG Audio (0xC0) on PID 0x100 check & synchronize audio file 001.mp
--> AC-3/DTS Audio on PID 0x103 check & synchronize audio file 001.ac
summary of created media files: .Video (m2v): 30265 Frames 00:20:10.600 '/vdrconvert/film/tmp/vdr2dvd/12519/1/VDRSYNC.4Xe0ra/001.mpv' Audio 0 (ac3): 37831 Frames 00:20:10.592 0/0/0/0 '/vdrconvert/film/tmp/vdr2dvd/12519/1/VDRSYNC.4Xe0ra/001.ac3' Audio 1 (mp2): 50441 Frames 00:20:10.584 0/0/0/0 '/vdrconvert/film/tmp/vdr2dvd/12519/1/VDRSYNC.4Xe0ra/001.mpa'
have that something to do with the DVDUSESTREAMS="apid1:mp2+de dpid1:ac3 +de apid2:mp2+en" settings ?
i have upload the vdr2dvd.log on the following side. http://www.sendspace.com/file/d50i8b
Martin
Am Freitag, den 26.06.2009, 10:19 +0200 schrieb Falk Spitzberg:
Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg:
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Diff file attached
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator:
I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Heres my final errors:
-> add frames Audio PTS: first packet 06:58:29.361, last packet 08:42:03.105 Video PTS: start 1.GOP 06:58:29.768, end last GOP 08:37:00.640 -> adjusting audio at video-timeline -> src_audio: MPEG-1, Layer2, 48000Hz, stereo, 160kbps, noCRC @ 00:00:00.000 ^M2 %^M3 %^M4 %^M5 %^M6 %^M7 %^M8 %^M9 %^M10 %^M11 %^M12 %^M13 %^M14 %^M15 %^M16 %^M17 %^M18 %^M19 %^M20 %^M21 %^M22 %^M23 %^M24 %^M25 %^M26 %^M27 %^M28$ ---> new File: '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa'
summary of created media files: Video (m2v): 209 Frames 00:00:06.970 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpv' Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpa' Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa' => 1,123,980 bytes written... -> we have 3687 warnings/errors. done... 1 collection(s) processed @ 00:01:43.382
Enter do_transcode Enter do_prepare_titelmenu Enter do_mplex ERROR : Keine Audiospuren NOTICE : exit! Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : 28-06-2009 09:20:47 : Session /usr/local/bin/vdr2dvd.sh Exit
Any suggestions?
Thanks, ----- Original Message ----- From: "Falk Spitzberg" post@spitzberg.de To: "VDR Mailing List" vdr@linuxtv.org Sent: Friday, June 26, 2009 4:19 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg:
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Diff file attached
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator:
I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post@spitzberg.de
--------------------------------------------------------------------------------
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
hu_emulator wrote:
Heres my final errors:
-> add frames Audio PTS: first packet 06:58:29.361, last packet 08:42:03.105 Video PTS: start 1.GOP 06:58:29.768, end last GOP 08:37:00.640 -> adjusting audio at video-timeline -> src_audio: MPEG-1, Layer2, 48000Hz, stereo, 160kbps, noCRC @ 00:00:00.000 ^M2 %^M3 %^M4 %^M5 %^M6 %^M7 %^M8 %^M9 %^M10 %^M11 %^M12 %^M13 %^M14 %^M15 %^M16 %^M17 %^M18 %^M19 %^M20 %^M21 %^M22 %^M23 %^M24 %^M25 %^M26 %^M27 %^M28$ [...] Any suggestions?
Those ^M look line DOS linebreaks, maybe you should give dos2unix a try first...
Best regards, Christian
I am still waiting for anyone to help on this. If you have a known working vdr2dvd.sh that works with projectX could you please make it available. Or if you have one that works with vdrsync I can use that too. Thank you in advance, ----- Original Message ----- From: "hu_emulator" hu_emulator@hotmail.com To: "VDR Mailing List" vdr@linuxtv.org Sent: Sunday, June 28, 2009 9:32 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Heres my final errors:
-> add frames Audio PTS: first packet 06:58:29.361, last packet 08:42:03.105 Video PTS: start 1.GOP 06:58:29.768, end last GOP 08:37:00.640 -> adjusting audio at video-timeline -> src_audio: MPEG-1, Layer2, 48000Hz, stereo, 160kbps, noCRC @ 00:00:00.000 ^M2 %^M3 %^M4 %^M5 %^M6 %^M7 %^M8 %^M9 %^M10 %^M11 %^M12 %^M13 %^M14 %^M15 %^M16 %^M17 %^M18 %^M19 %^M20 %^M21 %^M22 %^M23 %^M24 %^M25 %^M26 %^M27 %^M28$ ---> new File: '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa'
summary of created media files: Video (m2v): 209 Frames 00:00:06.970 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpv' Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpa' Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa' => 1,123,980 bytes written... -> we have 3687 warnings/errors. done... 1 collection(s) processed @ 00:01:43.382
Enter do_transcode Enter do_prepare_titelmenu Enter do_mplex ERROR : Keine Audiospuren NOTICE : exit! Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : 28-06-2009 09:20:47 : Session /usr/local/bin/vdr2dvd.sh Exit
Any suggestions?
Thanks, ----- Original Message ----- From: "Falk Spitzberg" post@spitzberg.de To: "VDR Mailing List" vdr@linuxtv.org Sent: Friday, June 26, 2009 4:19 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg:
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Diff file attached
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator:
I edited your changes and when I run vdrconvert with the new vdr2dvd.sh it errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post@spitzberg.de
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Am Freitag, den 03.07.2009, 18:03 -0400 schrieb hu_emulator:
I am still waiting for anyone to help on this. If you have a known working vdr2dvd.sh that works with projectX could you please make it available. Or if you have one that works with vdrsync I can use that too. Thank you in advance,
I have attached vdr2dvdTS.sh. This is known to work with ProjectX. No guarantee.
----- Original Message ----- From: "hu_emulator" hu_emulator@hotmail.com To: "VDR Mailing List" vdr@linuxtv.org Sent: Sunday, June 28, 2009 9:32 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Heres my final errors:
-> add frames Audio PTS: first packet 06:58:29.361, last packet 08:42:03.105 Video PTS: start 1.GOP 06:58:29.768, end last GOP 08:37:00.640 -> adjusting audio at video-timeline -> src_audio: MPEG-1, Layer2, 48000Hz, stereo, 160kbps, noCRC @ 00:00:00.000 ^M2 %^M3 %^M4 %^M5 %^M6 %^M7 %^M8 %^M9 %^M10 %^M11 %^M12 %^M13 %^M14 %^M15 %^M16 %^M17 %^M18 %^M19 %^M20 %^M21 %^M22 %^M23 %^M24 %^M25 %^M26 %^M27 %^M28$ ---> new File: '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa'
summary of created media files: Video (m2v): 209 Frames 00:00:06.970 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpv' Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpa' Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa' => 1,123,980 bytes written... -> we have 3687 warnings/errors. done... 1 collection(s) processed @ 00:01:43.382
Enter do_transcode Enter do_prepare_titelmenu Enter do_mplex ERROR : Keine Audiospuren NOTICE : exit! Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : 28-06-2009 09:20:47 : Session /usr/local/bin/vdr2dvd.sh Exit
Any suggestions?
Thanks, ----- Original Message ----- From: "Falk Spitzberg" post@spitzberg.de To: "VDR Mailing List" vdr@linuxtv.org Sent: Friday, June 26, 2009 4:19 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg:
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Diff file attached
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator: > I edited your changes and when I run vdrconvert with the new > vdr2dvd.sh it > errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post@spitzberg.de
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Thank you for your help. Replaced vdr2dvd.sh with your, renamed to vdr2dvd.sh, rebooted. But still getting the following error: ---> new File: '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.vTpfbc/001[1].mpa'
summary of created media files: Video (m2v): 209 Frames 00:00:06.970 '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.v$ Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.v$ Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.v$ => 1,123,980 bytes written... -> we have 7361 warnings/errors. done... 1 collection(s) processed @ 00:01:33.544
Enter do_transcode Enter do_prepare_titelmenu Enter do_mplex ERROR : Keine Audiospuren NOTICE : exit! Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : 05-07-2009 01:29:04 : Session /usr/local/bin/vdr2dvd.sh Exit
Any suggestions? ----- Original Message ----- From: "hu_emulator" hu_emulator@hotmail.com To: "VDR Mailing List" vdr@linuxtv.org Sent: Friday, July 03, 2009 6:03 PM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
I am still waiting for anyone to help on this. If you have a known working vdr2dvd.sh that works with projectX could you please make it available. Or if you have one that works with vdrsync I can use that too. Thank you in advance, ----- Original Message ----- From: "hu_emulator" hu_emulator@hotmail.com To: "VDR Mailing List" vdr@linuxtv.org Sent: Sunday, June 28, 2009 9:32 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Heres my final errors:
-> add frames Audio PTS: first packet 06:58:29.361, last packet 08:42:03.105 Video PTS: start 1.GOP 06:58:29.768, end last GOP 08:37:00.640 -> adjusting audio at video-timeline -> src_audio: MPEG-1, Layer2, 48000Hz, stereo, 160kbps, noCRC @ 00:00:00.000 ^M2 %^M3 %^M4 %^M5 %^M6 %^M7 %^M8 %^M9 %^M10 %^M11 %^M12 %^M13 %^M14 %^M15 %^M16 %^M17 %^M18 %^M19 %^M20 %^M21 %^M22 %^M23 %^M24 %^M25 %^M26 %^M27 %^M28$ ---> new File: '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa'
summary of created media files: Video (m2v): 209 Frames 00:00:06.970 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpv' Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001.mpa' Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/11498/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.mKDQY1/001[1].mpa' => 1,123,980 bytes written... -> we have 3687 warnings/errors. done... 1 collection(s) processed @ 00:01:43.382
Enter do_transcode Enter do_prepare_titelmenu Enter do_mplex ERROR : Keine Audiospuren NOTICE : exit! Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : 28-06-2009 09:20:47 : Session /usr/local/bin/vdr2dvd.sh Exit
Any suggestions?
Thanks, ----- Original Message ----- From: "Falk Spitzberg" post@spitzberg.de To: "VDR Mailing List" vdr@linuxtv.org Sent: Friday, June 26, 2009 4:19 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
Am Freitag, den 26.06.2009, 09:43 +0200 schrieb Falk Spitzberg:
Am Donnerstag, den 25.06.2009, 21:50 +0200 schrieb Martin Gansser:
I have also tested your patch with vdrconvert-0.2.0 but with a few Extensions in vdr2dvd.sh.
The final error message in vdr2dvd.log says, that no audio traces exists.
Oops, i compared my hacked version with the wrong file.
Here a diff against the original vdr2dvd.sh from vdrconvert-0.2.1
My hack assumes that you are using ProjectX.
Sorry for the confusion!
Falk
Diff file attached
Am Mittwoch, den 24.06.2009, 17:41 -0400 schrieb hu_emulator: > I edited your changes and when I run vdrconvert with the new > vdr2dvd.sh it > errors out. Could you post or make available your vdr2dvd.sh?
What kind of error do you get?
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-- Falk Spitzberg Tel: +49 5242 901626 E-Mail: post@spitzberg.de
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Am Sonntag, den 05.07.2009, 06:51 -0400 schrieb hu_emulator:
Thank you for your help. Replaced vdr2dvd.sh with your, renamed to vdr2dvd.sh, rebooted. But still getting the following error: ---> new File: '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.vTpfbc/001[1].mpa'
summary of created media files: Video (m2v): 209 Frames 00:00:06.970 '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.v$ Audio 0 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.v$ Audio 1 (mp2): 290 Frames 00:00:06.960 0/0/0/0 '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.v$ => 1,123,980 bytes written... -> we have 7361 warnings/errors. done... 1 collection(s) processed @ 00:01:33.544
Enter do_transcode Enter do_prepare_titelmenu Enter do_mplex ERROR : Keine Audiospuren NOTICE : exit! Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter : 05-07-2009 01:29:04 : Session /usr/local/bin/vdr2dvd.sh Exit
what is the primary language in your dvb stream? Is ist en(glish)? if it is NOT de (german) then try to change in line 153:
..... && DVDUSESTREAMS="dpid1:ac3+de apid1:mp2 de ....
to
..... && DVDUSESTREAMS="dpid1:ac3+en apid1:mp2 en ....
or what ever the correct code of your language is.
Just a shot into the dark.....
Falk
hu_emulator wrote:
Thank you for your help. Replaced vdr2dvd.sh with your, renamed to vdr2dvd.sh, rebooted. But still getting the following error: ---> new File: '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.vTpfbc/001[1].mpa'
What version of Project-X are you using? Are you able to demux the recording with Project-X manually? You might want to update to 0.90.4.00.b30 from cvs if you are running a older version. With that version you could also give a go to the new version of the burn plugin, which should be compatible with vdr's new TS recordings:
http://www.vdr-portal.de/board/thread.php?threadid=87788&threadview=0&am...
-Petri
Still no go. I am using current ProjectX cvs I am able to demux the 0001.ts file with ProjectX via command line, bring up ProjectX and demux from there. Although it says over 8000 errors when demuxing. The vdr-burn plugin just gives me "errouneous job" errors.
Please help. ----- Original Message ----- From: "Petri Helin" phelin@googlemail.com To: "VDR Mailing List" vdr@linuxtv.org Sent: Monday, July 06, 2009 10:21 AM Subject: Re: [vdr] vdrconvert-vdr-1.7.0+
hu_emulator wrote:
Thank you for your help. Replaced vdr2dvd.sh with your, renamed to vdr2dvd.sh, rebooted. But still getting the following error: ---> new File: '/video0/iso/tmp/vdr2dvd/9137/%Day_the_Earth_Stood_Still_(All_Day)_/VDRSYNC.vTpfbc/001[1].mpa'
What version of Project-X are you using? Are you able to demux the recording with Project-X manually? You might want to update to 0.90.4.00.b30 from cvs if you are running a older version. With that version you could also give a go to the new version of the burn plugin, which should be compatible with vdr's new TS recordings:
http://www.vdr-portal.de/board/thread.php?threadid=87788&threadview=0&am...
-Petri
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
Christian Tramnitz -
Falk Spitzberg -
hu_emulator -
Martin Gansser -
Petri Helin