Hi,

I just received a new Nexus-S Rev 2.3 and installed it with kernel 2.6.12-rc5 and Firmware 261d.

Video works, I can record and replay recordings. But I cannot get the remote to work and I have no PCM sound. Both worked with Rev 2.2 and everything else is identical.

First the remote: I tried root@mm:~# av7110_loadkeys /etc/vdr/roc650.rc5 >/proc/av7110_ir root@mm:~# evtest /dev/input/event2 Input driver version is 1.0.0 Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0 Input device name: "DVB on-card IR receiver"

roc650.rc5 did work with my old Nexus-s Rev 2.2. I also tried hauppauge_grey.rc5, nothing either.

evtest does not react on anything. What could I try next?

The sound: I do have analog sound, just not SP/DIF. The A/V receiver does recognize a PCM signal coming from the Nexus, but is simply is silent. setup.conf says CurrentVolume = 255

ay 28 11:27:42 mm kernel: saa7146: found saa7146 @ mem de98ce00 (revision 1, irq 11) (0x13c2,0x000e). May 28 11:27:42 mm kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3). May 28 11:27:42 mm kernel: adapter has MAC addr = 00:d0:5c:24:e0:c6 May 28 11:27:42 mm kernel: dvb-ttpci: gpioirq unknown type=0 len=0 May 28 11:27:42 mm kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d May 28 11:27:42 mm kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface May 28 11:27:42 mm kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected May 28 11:27:42 mm kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] May 28 11:27:42 mm kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)... May 28 11:27:42 mm kernel: dvb-ttpci: found av7110-0.