Hi
I run
# vdr -Pxine in one console
# xine 'vdr:tmp/vdr-xine/stream#demux:mpeg_pes in other console (or # xine -p -s vdr)
I get xine osd and I found screen is displayed with following error (If
I click on VDR button)
- xine engine error -
There is no input plugin available to handle
'vdr:tmp/vdr-xine/stream#demux:mpeg_pes'
Maybe MRL syntax is wrong or file/stream
Source does not exit.
In first console :-
Vdr-xine: Client connecting ...
::write(65536) returned -1 error 32; broken pipe
Vdr-xine: Client disconnected!
Vdr-xine: Client connect failed!
And in /var/log/messages
ERROR: 13890 ring buffer overflows (2611320 bytes dropped)
(similar message keeps on repeating)
Can anybody suggest me what wrong with vdr and vdr-xine.
--Thanks and Regards
Gulab Chandra Yadava
______________________________________________________________ DISCLAIMER: This electronic message, and any attachments to this electronic message are intended for the exclusive use of the addressee(s)named herein and may contain legally privileged and confidential information. It is the property of Celstream Technologies Pvt. Ltd. If you are not the intended recipient, you are hereby strictly notified not to copy, forward, distribute or use this message or any attachments thereto. If you have received this message in error, please delete it and all copies thereof from your system and notify the sender at Celstream Technologies or administrator@celstream.com immediately _______________________________________________________________
Gulab Chandra Yadava wrote:
Hi I run # vdr -Pxine in one console # xine 'vdr:tmp/vdr-xine/stream#demux:mpeg_pes in other console (or # xine –p –s vdr)
Try # xine "vdr:/tmp/vdr-xine/stream#demux:mpeg_pes" as is it is written in
http://www.vdr-wiki.de/wiki/index.php/Xine-plugin
You are missing the / before tmp.
/Fred
Hi.
Gulab Chandra Yadava wrote:
# vdr -Pxine in one console
Looks good.
# xine 'vdr:tmp/vdr-xine/stream#demux:mpeg_pes in other console (or # xine -p -s vdr)
First is wrong, as others have said; missing a /... Second should be OK.
I get xine osd and I found screen is displayed with following error (If I click on VDR button)
Clicking the VDR button on xine should be fine too. Again, that works here. Can you please start vdr -Pxine, wait a moment, then "ls -lR /tmp/vdr*" (no quotes), please? "ls -ld /tmp" might also be useful.
- xine engine error -In first console :- Vdr-xine: Client connecting ... ::write(65536) returned -1 error 32; broken pipe Vdr-xine: Client disconnected! Vdr-xine: Client connect failed!
That looks bad. From the looks of some of your earlier messages, you're running a distribution-customised or package-maintainer-customised VDR (normal VDR uses /video for config files, yours seems to use /etc/vdr, plus you seem to have a "vdr" user). Is this right, and if so what distro+version is this? You also mention kernel 2.6.16; was this compiled yourself? Your earlier mails also contains a log extract that mentions "switching to channel 1"; what're the first few lines of your /etc/vdr/channels.conf?
And in /var/log/messages ERROR: 13890 ring buffer overflows (2611320 bytes dropped)
I've only ever seen this with VDR tuned to a channel OK, but the output device was underperforming (eg disk that got hammered by something else, or filled up, or streamdev and a flaky client). I wouldn't think vdr-xine would cause this, especially as you've yet to connect xine to it...
(similar message keeps on repeating)
Might I ask if it said anything immediately above this?
Can anybody suggest me what wrong with vdr and vdr-xine.
Isn't that just a tad inflamatory?
hi,
Gulab Chandra Yadava writes:
I get xine osd and I found screen is displayed with following error (If
I click on VDR button)
- xine engine error - There is no input plugin available to handle 'vdr:tmp/vdr-xine/stream#demux:mpeg_pes' Maybe MRL syntax is wrong or file/stream Source does not exit.
I have never gotten this message, which is pointing two different causes of error. Are you sure the xine you run is the one you compiled yourself, patched with the vdr-xine patch?
Btw. stop sending HTML to the list.
yours, Jouni
-
Fredrik Svensson -
Gulab Chandra Yadava -
Iain -
Jouni Karvo