Hi all,

here is patch for using motor with vdr-1.7.22. As the diseqc subsystem changed quite a lot in 1.7.22 please report any problem.

I'm using/testing it together with vtuner devices (NessieDVB) and cascade of diseqc switches:

1. DVB device: vtuner(PC) <-> LAN <-> NessieDVB <-> motor <-> uncomm.switch <-> comm. switch) 2. DVB device: vtuner(PC) <-> LAN <-> NessieDVB <-> uncomm.switch <-> comm. switch)

I'm using it together with VDR capability of dedicated and undedicated sources to some cards and it works for me without problems.

I do not have possibility to test it together with real DVB cards inside PC, so any remarks are welcomed.

My diseqc.conf looks like:

# ONLY SWITCHES

1 2: S19.2E 11700 V 9750 t v W30 [E0 10 39 F0] W30 [E0 10 38 F0] W30 t S19.2E 99999 V 10600 t v W30 [E0 10 39 F0] W30 [E0 10 38 F1] W30 T S19.2E 11700 H 9750 t V W30 [E0 10 39 F0] W30 [E0 10 38 F2] W30 t S19.2E 99999 H 10600 t V W30 [E0 10 39 F0] W30 [E0 10 38 F3] W30 T

S13.0E 11700 V 9750 t v W30 [E0 10 39 F0] W30 [E0 10 38 F4] W30 t S13.0E 99999 V 10600 t v W30 [E0 10 39 F0] W30 [E0 10 38 F5] W30 T S13.0E 11700 H 9750 t V W30 [E0 10 39 F0] W30 [E0 10 38 F6] W30 t S13.0E 99999 H 10600 t V W30 [E0 10 39 F0] W30 [E0 10 38 F7] W30 T

....

# MOTOR + SWITCHES

1: S1.0W 11700 V 9750 t V G [E0 10 39 F1] v W30 [E0 10 38 FC] W30 v t S1.0W 99999 V 10600 t V G [E0 10 39 F1] v W30 [E0 10 38 FD] W30 v T S1.0W 11700 H 9750 t V G [E0 10 39 F1] V W30 [E0 10 38 FE] W30 V t S1.0W 99999 H 10600 t V G [E0 10 39 F1] V W30 [E0 10 38 FF] W30 V T

S9.0E 11700 V 9750 t V G [E0 10 39 F1] v W30 [E0 10 38 FC] W30 v t S9.0E 99999 V 10600 t V G [E0 10 39 F1] v W30 [E0 10 38 FD] W30 v T S9.0E 11700 H 9750 t V G [E0 10 39 F1] V W30 [E0 10 38 FE] W30 V t S9.0E 99999 H 10600 t V G [E0 10 39 F1] V W30 [E0 10 38 FF] W30 V T

....

Enjoy,

Ales