Hello,
regarding http://de.kingofsat.net/hdtv.php there are some "free" hdtv channels in DVB-S MPEG-2 and also in DVB-S MPEG-4.
I am specially interested in :
Hotbird 6 (13.0E) - 10834.00 V - DVB-S - 27500 3/4 - NID: 176 - TID: 11600 - Txp: 116 - Beam / Ausleuchtzone: Europe - TPS Arte (France) MPEG-4
Is there any way to reccord/watch it from VDR (I use xine) ?
I have both budget and FF cards in case that matter.
Thank you very much,
Not with vdr ('cause of MPEG4/AVC), but with patched szap and parallel doing - cat from /dev/dvb/adapterX/dvr0 for recording or - maybe live with mplayer/vlc
like this link: http://www.vdr-portal.de/board/thread.php?postid=409451#post409451
BR, Uwe
Am Samstag, 17. Juni 2006 17:30 schrieb Gregoire Favre:
Hello,
regarding http://de.kingofsat.net/hdtv.php there are some "free" hdtv channels in DVB-S MPEG-2 and also in DVB-S MPEG-4.
I am specially interested in :
Hotbird 6 (13.0E) - 10834.00 V - DVB-S - 27500 3/4 - NID: 176 - TID: 11600 - Txp: 116 - Beam / Ausleuchtzone: Europe - TPS Arte (France) MPEG-4
Is there any way to reccord/watch it from VDR (I use xine) ?
I have both budget and FF cards in case that matter.
Thank you very much,
On Sat, Jun 17, 2006 at 06:22:41PM +0200, Uwe Hanke wrote:
Not with vdr ('cause of MPEG4/AVC), but with patched szap and parallel doing
- cat from /dev/dvb/adapterX/dvr0 for recording or
- maybe live with mplayer/vlc
like this link: http://www.vdr-portal.de/board/thread.php?postid=409451#post409451
I did test this lots of time ago, without much sucess... certainly the decoding in mplayer/vlc is better now... In the thread they are my problems report by the way :-)
Oops, no I can't make it better now...
I can tune with my budget card but not with FF.
Any hope to have MPEG4/AVC pre-support in VDR ?
Thank,
Hello, How do you plan to decode this? I do not want to buy a dualcore cpu for this and only for this. Afaik there is no FF card for this but it would be the best solution for it. Gruß Halim
On Sonntag 18 Juni 2006 19:54, Michael Müllner wrote:
Gregoire Favre schrieb:
Any hope to have MPEG4/AVC pre-support in VDR ?
Thank,
I hope so :) maybe we can than record this H264 over dvb-s. Atm i think its a streamID problem and vdr set the vpid to 0.
Is it just a small thing in pat.c to record these streams (see attached patch) ?
On dvb-list there are some post that there are some sources even on DVB-T in uk and fr.
On Sun, Jun 18, 2006 at 08:12:34PM +0200, Stefan Lucke wrote:
Is it just a small thing in pat.c to record these streams (see attached patch) ?
On dvb-list there are some post that there are some sources even on DVB-T in uk and fr.
I might have created a wrong entry for ARTE in my channels.conf but it crash when I try to record...
Anyone succeeded here ?
Gregoire Favre gregoire.favre@gmail.com wrote:
regarding http://de.kingofsat.net/hdtv.php there are some "free" hdtv channels in DVB-S MPEG-2 and also in DVB-S MPEG-4.
...
I have both budget and FF cards in case that matter.
I believe for MPEG4 / H264 transmissions DVB-S2 is required, and AFAIK there is no dvb-linux supported card yet (and no support in VDR, for one).
Harald Milz schrieb:
Gregoire Favre gregoire.favre@gmail.com wrote:
regarding http://de.kingofsat.net/hdtv.php there are some "free" hdtv channels in DVB-S MPEG-2 and also in DVB-S MPEG-4.
...
I have both budget and FF cards in case that matter.
I believe for MPEG4 / H264 transmissions DVB-S2 is required, and AFAIK there is no dvb-linux supported card yet (and no support in VDR, for one).
No, its not needed there are also some MPEG4/H264 over dvb-s but the posted patch didnt work here. (VDR restarts and the file hase 0 bytes)
Mike
On Donnerstag 22 Juni 2006 19:21, Michael Müllner wrote:
Harald Milz schrieb:
Gregoire Favre gregoire.favre@gmail.com wrote:
regarding http://de.kingofsat.net/hdtv.php there are some "free" hdtv channels in DVB-S MPEG-2 and also in DVB-S MPEG-4.
...
I have both budget and FF cards in case that matter.
I believe for MPEG4 / H264 transmissions DVB-S2 is required, and AFAIK there is no dvb-linux supported card yet (and no support in VDR, for one).
No, its not needed there are also some MPEG4/H264 over dvb-s but the posted patch didnt work here. (VDR restarts and the file hase 0 bytes)
You refer to the one from me ? If yes, which "PID" lines where printed by the enabled printf ?
-
Gregoire Favre -
Halim Sahin -
Harald Milz -
Michael Müllner -
Stefan Lucke -
Uwe Hanke