I went through the online manual at www.linuxtv.org/vdrwiki, in search of explanation of why certain keys presses appears. I'm using vdr-1.5.12
If I watch live TV and press the OK button, it will show the current/next in the info bar. By pressing Left/Right the information displayed disappears and the only way to get it back is by pressing Menu followed by OK again. Is this a bug or is it fully implemented by a plug-in?
Is there any documentation of the acronyms used for example VPS and explanation?
I have a single budget card: 02:0c.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
with an IR usb receiver: Bus 003 Device 002: ID 147a:e02d Formosa Industrial Computing, Inc.
I use the vdr-remote plugin for using the IR remote control.
I couldn't map the channel +/- keys or volume +/- keys to the remote as they appear to register as up/down keys that was already defined by remote.confand also dead keys. Should I rather try out lirc or does somebody know of how to resolve incorrect/dead keys?
I also tried doing a screen capture using vdr-xine-0.8.0 with xine-lib-1.1.8, which failed with the following output:
=== CLEAR(-4.4) === CLEAR(-4.5) --- CLEAR(-4b) vdr: osdflush: n: 2, 20.3, timeout: 0, result: 0 AFD changed from -2 to -1 bad_frame AFD changed from -2 to -1 bad_frame vdr: osdflush: n: 1, 9.7, timeout: 0, result: 0 vdr: osdflush: n: 20, 203.1, timeout: 1, result: 2 vdr: osdflush: n: 11, 116.0, timeout: 0, result: 0 vdr: osdflush: n: 1, 12.0, timeout: 0, result: 0 vdr: osdflush: n: 2, 23.6, timeout: 0, result: 0 vdr: osdflush: n: 2, 18.9, timeout: 0, result: 0 vdr: osdflush: n: 1, 13.3, timeout: 0, result: 0 abort: xine.c:1996: xine_get_current_frame: Aborting. Aborted
How would one go on to implement Afrikaans as a language for VDR, as it is my native language?
Still a great product! Theunis