Op Do, 15 januari, 2009 23:30, schreef Mika Laitio:
Hi
-- SNIP --
I have following in my channel conf for dvb-t and dvb-s channels: YLE TV1;YLE:546000:B8C23G8M64T8Y0:T:27500:512=2:650=fin:2321:0:17:8438:4097:0 arte;ARD:10743:hC56M5O0S0:S19.2E:22000:401=2:402=deu,403=fra:404:0:28724:1:1051:0
Concerning Arte, I've got that same setting in my channels.conf. And I'm able to see that channel instantly.
Klaus, do you have any idea from which functions I should try to track more for finding the problem?
I use a Hauppauge NOVA-HD-S2 and I've updated to the latest S2API drivers on the s2-liplianin repository. It uses the same kernel-driver as the HVR-4000. And I don't have any tuning problems at all on Hotbird 13.0, Astra 19.2, Astra 23.5 and Astra 28.2. This is with VDR 1.7.0 and my own S2API patch as well as with VDR 1.7.3.
By any chance, did you try disabling diseqc? Because I had tuning problems when I used standard diseqc values with no retries with my diseqc 1.0 switch. I had to use the following safe diseqc commands for my diseqc 1.0 configuration:
# # port 1 S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W100 [E0 10 38 F0] W100 [E0 11 00] W100 A W15 t S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W100 [E0 10 38 F1] W100 [E0 11 00] W100 A W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W100 [E0 10 38 F2] W100 [E0 11 00] W100 A W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W100 [E0 10 38 F3] W100 [E0 11 00] W100 A W15 T # port 2 S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W100 [E0 10 38 F4] W100 [E0 11 00] W100 B W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W100 [E0 10 38 F5] W100 [E0 11 00] W100 B W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W100 [E0 10 38 F6] W100 [E0 11 00] W100 B W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W100 [E0 10 38 F7] W100 [E0 11 00] W100 B W15 T # port 3 S23.5E 11700 V 9750 t v W15 [E0 10 38 F8] W100 [E0 10 38 F8] W100 [E0 11 00] W100 A W15 t S23.5E 99999 V 10600 t v W15 [E0 10 38 F9] W100 [E0 10 38 F9] W100 [E0 11 00] W100 A W15 T S23.5E 11700 H 9750 t V W15 [E0 10 38 FA] W100 [E0 10 38 FA] W100 [E0 11 00] W100 A W15 t S23.5E 99999 H 10600 t V W15 [E0 10 38 FB] W100 [E0 10 38 FB] W100 [E0 11 00] W100 A W15 T # port 4 S28.2E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.2E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.2E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.2E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T S28.5E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.5E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.5E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.5E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T
Mika
Regards,
Niels Wagenaar
I have following in my channel conf for dvb-t and dvb-s channels: YLE TV1;YLE:546000:B8C23G8M64T8Y0:T:27500:512=2:650=fin:2321:0:17:8438:4097:0 arte;ARD:10743:hC56M5O0S0:S19.2E:22000:401=2:402=deu,403=fra:404:0:28724:1:1051:0
Concerning Arte, I've got that same setting in my channels.conf. And I'm able to see that channel instantly.
Klaus, do you have any idea from which functions I should try to track more for finding the problem?
I use a Hauppauge NOVA-HD-S2 and I've updated to the latest S2API drivers on the s2-liplianin repository. It uses the same kernel-driver as the HVR-4000. And I don't have any tuning problems at all on Hotbird 13.0, Astra 19.2, Astra 23.5 and Astra 28.2. This is with VDR 1.7.0 and my own S2API patch as well as with VDR 1.7.3.
I have tried both with the s2-liblianin and v4l-dvb versions of the drivers and I do not see any differences. scan,szap,szap-s2,scan-s2 and vdr-1.6.0 works ok with all of them.
It's just that neither vdr-1.7.0 with your patches or vdr-1.7.2 or vdr-1.7.3 without patches are working.
By any chance, did you try disabling diseqc? Because I had tuning problems when I used standard diseqc values with no retries with my diseqc 1.0 switch. I had to use the following safe diseqc commands for my diseqc 1.0 configuration:
I do not have diseqc in my system and I checked that at least the cDvbTuner::SetFrontEnd() method from dvbdevice.c detected that correctly and went to else part of the block. (=no diseqcs)
When I try to change to a (not previously tuned with szap) dvb-s/s2 channel, vdr will just notice that the tunerStatus variable in Action() method is = 2, which means that "tuned". It will never go to state 3 which means "locked".
With szap-s2,szap or vdr-1.6.0 I can however get the locks immediately. So I am wondering that what could be the most potential places in vdr code where I should try to make some changes to tuning/locking code for testing. Is it the cDvbTuner::SetFrontEnd method or is there also some other methods that are really interfacing with S2API and could affect to the tuning or locking?
Mika
# # port 1 S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W100 [E0 10 38 F0] W100 [E0 11 00] W100 A W15 t S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W100 [E0 10 38 F1] W100 [E0 11 00] W100 A W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W100 [E0 10 38 F2] W100 [E0 11 00] W100 A W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W100 [E0 10 38 F3] W100 [E0 11 00] W100 A W15 T # port 2 S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W100 [E0 10 38 F4] W100 [E0 11 00] W100 B W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W100 [E0 10 38 F5] W100 [E0 11 00] W100 B W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W100 [E0 10 38 F6] W100 [E0 11 00] W100 B W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W100 [E0 10 38 F7] W100 [E0 11 00] W100 B W15 T # port 3 S23.5E 11700 V 9750 t v W15 [E0 10 38 F8] W100 [E0 10 38 F8] W100 [E0 11 00] W100 A W15 t S23.5E 99999 V 10600 t v W15 [E0 10 38 F9] W100 [E0 10 38 F9] W100 [E0 11 00] W100 A W15 T S23.5E 11700 H 9750 t V W15 [E0 10 38 FA] W100 [E0 10 38 FA] W100 [E0 11 00] W100 A W15 t S23.5E 99999 H 10600 t V W15 [E0 10 38 FB] W100 [E0 10 38 FB] W100 [E0 11 00] W100 A W15 T # port 4 S28.2E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.2E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.2E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.2E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T S28.5E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.5E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.5E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.5E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T
Mika
Regards,
Niels Wagenaar
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
Mika Laitio -
Niels Wagenaar