Hello,
I have just installed a new parabola (BISAT-G3 from http://www.radio-materiel.ch/scripts/rama/fiche.w?ref=BISAT-G3 ) with a nice diseqc (VNE-G3/G4 from http://www.radio-materiel.ch/scripts/rama/fiche.w?ref=VNE-G3%2FG4 ). And if I only use my first FF card it seems to work (only tested on hotbird and astra 19.2E).
I used the full diseqc setup found in vdr source archive : is that the right one ?
My second FF card don't tune to anything, even if I change the cable from second to first and vice-versa. Using only the budget card seems also to work, but I can't use two cards simultenously...
Any idea what to do ?
Thank you very much,
Hello,
I have found that my DiSEqC is 1.0.
Could someone help me to find the right 1.0 setup for A Astra 19.2E B Hotbird 13.0E C Astra 28.2E
I don't know exactly what's to take from : http://www.vdr-wiki.de/wiki/index.php/DiSEqC http://www.vdr-wiki.de/wiki/index.php/Diseqc.conf
Thank you very much,
Grégoire FAVRE wrote:
Something like this _might_ work for you. It works for me. Two DVB-S cards accessing the same LNBs and switches simultaneously will _not_ work without the LNB sharing patch.
--- 8< --- # E0 command from master, no reply required, first transmission # 10 Any LNB, switch or SMATV #22 Position A #23 Option A #26 Position B #27 Option B
# port 1 option a position a # port 2 option a position b # port 3 option b position a # port 4 option b position b
S19.2E 11700 V 9750 t v W15 [E0 10 23] W15 [E0 10 22] W15 t S19.2E 99999 V 10600 t v W15 [E0 10 23] W15 [E0 10 22] W15 T S19.2E 11700 H 9750 t V W15 [E0 10 23] W15 [E0 10 22] W15 t S19.2E 99999 H 10600 t V W15 [E0 10 23] W15 [E0 10 22] W15 T
S13.0E 11700 V 9750 t v W15 [E0 10 23] W15 [E0 10 26] W15 t S13.0E 99999 V 10600 t v W15 [E0 10 23] W15 [E0 10 26] W15 T S13.0E 11700 H 9750 t V W15 [E0 10 23] W15 [E0 10 26] W15 t S13.0E 99999 H 10600 t V W15 [E0 10 23] W15 [E0 10 26] W15 T
S28.2E 11700 V 9750 t v W15 [E0 10 27] W15 [E0 10 22] W15 t S28.2E 99999 V 10600 t v W15 [E0 10 27] W15 [E0 10 22] W15 T S28.2E 11700 H 9750 t V W15 [E0 10 27] W15 [E0 10 22] W15 t S28.2E 99999 H 10600 t V W15 [E0 10 27] W15 [E0 10 22] W15 T --- 8< ---
-sjm
Thank you very much, I'll will try at home :)
I have three quad lnb so it should be possible to use all cards on my system.
I really hope this one will work :-)
Grégoire FAVRE wrote:
Thank you very much, I'll will try at home :)
I have three quad lnb so it should be possible to use all cards on my system.
And you are telling this NOW. The necessary diseqc setup is VERY different for simple "universal" LNBs and quad LNBs.
I bet your LNBs have four outputs for each combination of hi/lo freq and polarization.
You really have to know how the LNBs are coupled to the diseqc switch. Do you have something like 16x2 switch? That means, inputs for four quad LNBs and outputs for two (or even more) receivers.
I really hope this one will work :-)
No, diseqc.conf designed to be used with universal LNBs and a diseqc switch is very unlikely to work for your setup.
Well,
using the following :
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 t S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 T
S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 T
S28.2E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t S28.2E 99999 V 10600 t v W15 [E0 10 38 F9] W15 T S28.2E 11700 H 9750 t V W15 [E0 10 38 FA] W15 t S28.2E 99999 H 10600 t V W15 [E0 10 38 FB] W15 T
works perfectly for cards 0 and 2, but not together. card 1 can't tune to anything else than astra 19.2E ??? And I don't understand why -D0 -D2 don't work neither ?
No, I can connect the DVB cards to any output of the LNB and it decodes the signal very well.
I am bad a drawing but I try :
************************** ************************** ************************* * Astra 19.2E quad lnb * * Hotbird 13E quad lnb * *Astra 28.2E quad lnb * ************************** ************************** ************************* | | | | | | | | | | | | | | | | | | | | | | | | ************************************************ * disecq 1.0 connected to the 3 lnb and that * * have four outputs to connect my DVB-s * ************************************************
No, quiete simpler here.
No, diseqc.conf designed to be used with universal LNBs and a diseqc switch is very unlikely to work for your setup.
Well, it works more or less...
Thank,
-
"Sami J. Mäkinen" -
Grégoire FAVRE