Hi group!
Has anyone tested running an EPIA ML6000 fanless motherboard with vdr-xine?
The spec's only say "MPEG-2 Accelerator" rather than "Decoder/Accelerator" - will it work with a VGA 1366x768 16:9 full screen?
Thanks Simon
Simon Baxter wrote:
Hi group!
Has anyone tested running an EPIA ML6000 fanless motherboard with vdr-xine?
The spec's only say "MPEG-2 Accelerator" rather than "Decoder/Accelerator" - will it work with a VGA 1366x768 16:9 full screen?
I have used vdr xineliboutput running on an EPIA-M10000 which has the same CLE266 MPEG decoder chip as your board. Works with fullscreen 1680x1050 and hardware decoding. Needs the OpenChrome graphics driver, of course. Usually also "strange" resolutions as yours work fine with the appropriate modeline in the xorg.conf.
Ondrej
Le vendredi 18 avril 2008 à 06:26 +1200, Simon Baxter a écrit :
Has anyone tested running an EPIA ML6000 fanless motherboard with vdr-xine?
It is a CLE266 it will work just fine
The spec's only say "MPEG-2 Accelerator" rather than "Decoder/Accelerator" - will it work with a VGA 1366x768 16:9 full screen?
No problem the CLE266 limit is 1600x1050 I am running mine at 1440x900.
Cheers
Tony
I suppose this is a bit off topic, but what happens when the source is MPEG4-11?, can you expand on this mother board by using PCI Express add-on card?
Theunis
On 18/04/2008, Tony Grant tony@tgds.net wrote:
Le vendredi 18 avril 2008 à 06:26 +1200, Simon Baxter a écrit :
Has anyone tested running an EPIA ML6000 fanless motherboard with
vdr-xine?
It is a CLE266 it will work just fine
The spec's only say "MPEG-2 Accelerator" rather than
"Decoder/Accelerator" -
will it work with a VGA 1366x768 16:9 full screen?
No problem the CLE266 limit is 1600x1050 I am running mine at 1440x900.
Cheers
Tony
--
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
Ondrej Wisniewski -
Simon Baxter -
Theunis Potgieter -
Tony Grant